Here is my code so far trying to sort the array. The only problem is with Option Strict On, it throws errors on sortedarray(i), and all of the j-1's, j's.Error is dissallows conversions from long to integer
[Code]...
how i have to write this variable not to have errors
Dim divider As Integer = (20 / 3)
Error 1 Option Strict On disallows implicit conversions from 'Double' to 'Integer'
i am using integer for days and miles, and the calculation is for money so i am using decimal in one function i am allowed to CDec the days for the calculation and the next function it gives me an error.
I dont see where what i am doing is any different than the other.
Function CalcLodging(ByVal intDays As Integer, ByVal decRoom As Decimal) As Decimal
Return (CDec(intDays)) * decRoom ' This function allows the conversion from integer
End Function
[Code].....
How do I correct the error Option Strict On disallows implicit conversions from 'Double' to 'Integer'. ?
The two lines below that divide by 2 are causing the error.
Private Function StringToByteArray(ByVal hex As String) As Byte()
Dim NumberChars As Int16 = CShort(hex.Length)
Dim bytes As Byte()
Dim i As Integer = 0
bytes = New Byte(NumberChars / 2) {}
[Code]...
Dim I As Integer
Dim iCount As Integer
Dim clrHashForeColor As Object
Dim clrHashBackColor As Object
cbotifcompression.Items.Add("LZW")
[Code].....
I get the error for both highlighted red parts = Option Strict On disallows implicit conversions from 'Integer' to 'Short'.
Also
I get = Option Strict On disallows operands of type Object for operator '='. Use the 'Is' operator to test for object identity.
[Code]...
How do I convert this proper? (Option Strict On)
Can you do something like this? Public sub dosomething(byref value as (Integer or Long)) And how can you make a method accepts a unlimited amount of parameters? I'll probaly be able to find a explanation on the internet, but could anyone tell me how this is called. I am not using the right keywords I think..
View 4 RepliesCan someone give me code to do the following.if the integer is 1-9 display a string 01,02,03 etc.. if 10 or over leave it as is.string display = yourInt.ToString("00");
View 6 RepliesAm using VB 2008 OS XP the problem am having is am getting an error Name 'Operators & Conversions' is not Declared , here is the code
[Code]...
i am trying to convert test from a label into a 'long integer' type. i will then use this long integer type to read from the database (Ms access 07). i will be reading an autoNumber from the database
View 2 RepliesI am struggling to get this to output calculations correctly. Have I properly made my conversions between decimal,string and so forth. Is that the only reason that a calculation would not produce the right result or is there another reason? I have negative total results for output when they should be positive.
Dim decAmount As Decimal
Dim decInterestRate As Decimal
Dim mdecFutureValue As Decimal
[code]...
Write a program to convert a U.S. Customary System length in miles, yards, feet and inches to a. Metric System length in kilometers, meters, and centimeters.My error message is: 'lstResult' is not declared
Public Class lengthConversion
Private Sub convertBtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles convertBtn.Click
Dim miles, yards, feet, inches As Double
[code]....
Is it possible to change the type of a controls' height from integer to long? I tried:
Panel2.Height = New Long
I'm trying to find a way to trick the compiler into exposing lines of code where the default "ToString" method of Integers, Longs, Doubles, DateTimes, etc. is being used. These are lines of code that must be reviewd for culture specifics. FxCop does not expose these areas when .ToString is not used explicity in the code.Putting a class in with something like the following freaks it out
Namespace system
Public Class Int32
Public Overrides Function ToSt
[code].....
I have an error in my VB.net program - I have tried various casts etc but it just will not resolve the issue - so reluctantly I post it here to see if anyone else has a similar problem.
Error 1 Option Strict On disallows implicit conversions from 'Object' to 'String'.
Private DS As New DataSet ' Languages
Function TransTxt(ByVal Frm As String, ByVal Item As String) As String
[Code]...
I faced an error when upgrading VB6 code to VB.NET. The error occurs at AddressOf WindowProc
AddressOf expression cannot be converted to 'Integer' because 'Integer' is not a delegate type
My declaration for SetWindowLong is:
Declare Function SetWindowLong Lib "user32" Alias "SetWindowLongA"(
ByVal hWnd As Integer,
ByVal nIndex As Integer,[code]....
What is the reason for the error I get?
I'm trying to create a linked list of an array of integers. Why is the following implicit conversion required?
When I run the code that contains that conversion, I get the following error.
As a real-time data acquisition user control data (a packet of an array of bytes) arrives every second, is converted into an integer array and inserted into a linked list.
The most recently arrived data is painted as coordinates on a grid at the right of a PictureBox using Graphics.DrawLine (pen,X1,Y1,X2,Y2).
The oldest data (arriving 120 seconds ago) will be drawn at the leftmost portion of the Picturebox.
Why a linked list rather than a list? To display 120 views of time sequence data, the draw routine the most recently inserted node to a node that points to Nothing. How do I limit the length of the linked list to 120 nodes and always ensure that the last node points to Nothing?
Do While Not item Is Nothing
item = item.NextItem
Loop
How can I get round this error: Option Strict On disallows implicit conversions from
[Code]...
I'm developing a utility that will look through Active Directory and find anyone that hasn't logged in 90, 120, 180, 365 days. Between what I know and researched on here I've pieced together code that works part of the time. When I LDAP a container with approx 2000 or less user objects it will work, but when I LDAP the entire directory it loops through approx 60,000 user objects.Part of the way through it returns the following warning:
ContextSwitchDeadlock was detected Message: The CLR has been unable to transition from COM context 0x4dbc88 to COM context 0x4dbdf8 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time. To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during long running operations.
When I tell it to continue it goes a little further before finally hitting a OutOfMemory Exception:
[Code]...
I wrote a program which loops through a very long CSV file (50 meg) and parses the data as it goes.Sometimes, the program aborts and I get the following message:The CLR has been unable to transition from COM context 0x37a090 to COM context 0x37a200 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time. To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during long running operations.
I know its going to take a while. There are several hundred thousand lines of text in the file that this program is reading. I am not sure exacly waht the message means, but my program seems to work fine other than the message. odd thing is sometimes the message doesnt always pop up..
I have a problem with my (aspx.vb, aspx) program. Since my vb program require more than a day to make some data analysis. however, the page always run a long period(one hours exactly) will be downed and become cant display the page. i am wondering is it related to dns error?
View 3 RepliesIs there a easer way of coding in stead of wrighting long long paragraphs like this in one line [code]All of this is on one line and i got lots of info to put down.."The game will begin on your 16th birthday with your mother waking you up. Today you are to go to the castle for the first time. Leave your bed and open your dresser for a Strength Seed. "
View 2 RepliesI am writing long text (1K to 2K characters long, plain xml data) into a cell in excel workbook.
The below statement throws COM error Exception from HRESULT: 0x800A03EC
range.set_Value(Type.Missing, data);If I copy paste the same xml manually into excel it just works fine ,but the same does not work progamatically.If I strip the text to something like 100/300 chars it works fine.
This code:
vb Dim s As String = strContents '<a global variable) Dim currentPos As Int64 = 0 Dim endPos As Int64 = strContents.Length - 1 '// A dictionary, used to count the frequencies Dim characterCounter As New Dictionary(Of [String], Int64)() While currentPos <> endPos '//
[CODE]...
Gives this error: Value of type 'System.Collections.Generic.KeyValuePair(Of String, Long)' cannot be converted to 'System.Collections.DictionaryEntry'.
In Visual Studio 2008 I am using :Private Declare Function BlockInput Lib "user32" (ByVal fBlock As Long) As Long To stop input from occuring during a search-replace operation.
BlockInput(True) ' do not allow input during search and destroy
Dim cursorIcon As Cursor
cursorIcon = Cursor
Cursor.Current = Cursors.WaitCursor
Then setting it to false at the end of the operation. It did not work, so I thought maybe it was because I was calling it from a child window, so I created a function in the mainwindow, and ran it like this:
FrmMain.BlockFrmMainInput()With these functions is the Main window:
[Code]...
It did not solve the problem. I thought maybe it was because I was running under the debugger, so I tried compiling and running it debugger-free, but that did not do any better. I am still getting input when I double-click the mouse on either form.
Write a program to convert a U.S. Customary System length in miles, yards, feet and inches to a. Metric System length in kilometers, meters, and centimeters.
I found this same project on these boards already however I received an error and was seeing if someone could see what I did wrong.
My error message is: 'lstResult' is not declared
Public Class lengthConversion
Private Sub convertBtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles convertBtn.Click
[Code].....
Here is my form code
Dim asInteger As Integer = 42
Dim aSingle As Single = 39.345677653
Dim Astring As String = "I like Candy"
Dim aBoolean As Boolean = True
[code]....
and im getting an error saying anInteger is not declared. Could anyone give me some help to why this is happening and also how it is fixed and give me some information so i can understand why it is not working so i no for future reference. Just reading back over my code i have realized i put
Dim asInteger As Integer = 42
instead of
Dim anInteger As Integer = 42
I usually use the developer fusion online code converter to convert code snippets from C# to VB.NET.It partially fails especially in LINQ or complex interface / inheritance scenarios. What are your experiences with other converters? Can you recommend another tool or website?
View 3 RepliesI am rather new to OOP and I have, what may be, a simple question. I am developing an architecture for a project that includes some object inheritence trees. I have been running into a bunch of narrowing conversion issues (the old 'Unable to cast object of type x to x' error). I understand the limitations of narrowing conversions and why this error exists, but I'm not quite sure how to get around it architecturally. Here is an analogous problem to mine...
[Code]...
Why is it giving me an error for this code
intWordNum = Rnd() * (strWords.GetUpperBound(0))
This is the error
Error 8 'GetUpperBound' is not a member of 'Integer'.