I downloaded the extended webbrowser control created by Matt Kleinwaks (thank you for sharing that).I am using the control to fill out forms on a website. The website uses a popup that contains an html form. The popup form will not close if I click the the html submit button or the close button (it does when using a regular browser). The bigger problem I am having is that when the popup reopens, it contains data in the html boxes that was I have already submited on a previous iteration of the popup. Like it is being cached or something. I am wondering if this has to do with the html buttons not working properly.I basically hit submit on the form, the browse rcontrol hangs up, then I close the form manually. Is there a line of code or something I can add to get it to work right? Like clearing a cookie or disposing of the popup form after I close it?
I am on my way to create my own tabbed advanced webbrowser in vb 2008.I have collected most of the tools for that,but i have the following problem:
The webbrowser control in vb 2008 is an instanse of IE.But i want to build my 'own' webbrowser, with custom contextmenustrip, navigate error messages ,etc
I am using a WebBrowser to load a webpage. In that page, there are several links. When clicking on one, it opens and then immediately closes. IE7's popup blocker is set to allow all from this site, nor does it work even if the popup blocker is completely disabled. I have no other blocker running.
I am using an embedded webbrowser control to access a third-party website, populate the username and password boxes on their front page, and login. The problem I have is that the resulting window that the site returns to me is in the form of a new window. What I want to do is capture this window and all it's session/cookie data in to the original webbrowser control, as even if I direct the original window to the same resulting url, some kind of authentication data is missing and the site tells me I have logged out, even though the popup window works fine. I need that page in the original control so that I can continue to access it programmatically, and I don't really want to get in to the complication of accessing the new window, as I expect I'll have to delve in to the api or something.
I made a simple extension of the PictureBox control. In retrospect, this might not have been the best starting point, but that's currently irrelevant. This is the first time I have tried extending a picturebox control. The point of the exercise was to attempt something odd, but I haven't even gotten that far. The control shows up in the common controls panel, and I can drag it onto the form, but it doesn't get added.
What am I doing wrong? There is very little code behind the new control at the moment, as I am just trying to test a concept, and what code there is doesn't actually get run because the control is never created, so NO code gets run.
I have a webbrowser. I am using using vb code to select a "Reject" button on my webpage. When "Reject" is selected a messagebox or a new window pops up and asks it I am sure. It has two buttons, "Okay" and "Cancel" I would like my program to always select "Okay" when the object is rejected by my code.I have been looking at NewWindow but can't seem to get it to do what I am looking for.
I have built myself a tabbed web browser but for the life of me I cannot get popups to work properly, they keep opening in a new Internet Explorer window instead of opening in a window from my browser. how to get a popup such as a login window etc to open in either a new window of my browser. how to implement it and get it to work..
How would I suppress this popup coming from my webbrowser its a javascript onbeforeload? I think from what I've been reading I've tried everything currently I am using a timer to grab it by its caption and its very unprofessional Here is the image of what im trying to stop the "are you sure you want to leave this page thing" [URL] I want to hopefully stop it in any way I can rather then by timer and caption.
Tried e.cancel on a new window = fail The timer method it still pops up = semi fail Script errors suppressed = would never work
Get Webbrowser Controls HTML I can get the current browsers html, however, when the page is updated via ajax, or has another form popup, it dosent see this new data.
Is there a way to get the new html that was added by ajax to the current docuement?
I am trying to trap the newwindow event for the webbrowser control using this code
Private Sub wbMain_NewWindow(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles wbMain.NewWindow Dim wb As WebBrowser = DirectCast(sender, WebBrowser) Dim link As HtmlElement = wb.Document.ActiveElement [Code] .....
But the href property is always empty, this is because the active element is the last button clicked. But it is a button I click in the webbrowser control that opens a link in IE.
Hello: i have javascript code for a popup calendar and works fine if a form is a form control: <form id="FormView1" runat="server">
however, if i use my formview control w/ the same code for a formview control, it doesn't put the value back into my text box txtDate after the user selects the date:
this seems to be the only difference so i was wondering if perhaps i need to reference this form in a different way? i don't know why it won't work for my formview control.
After a little research, I managed to get a working Help button added to my form. I did this by setting the MinimizeBox and MaximizeBox properties of the form to false, set the ShowHelp property of the form to true and added a HelpProvider component. I then added a string to each control's HelpString property that I want to display help on.
Everything works with one minor exception. When I clcik the help button in the form and then select a control, the HelpString (tooltip) is displayed in the far lower left corner of the screen. I assumed I would see this pop up at the cursor rather than where it is. I cannot seem to find a property to control the position of the HelpString popup.
I am writing a few web based apps which will require a webbrowser extension. I have already used the IE webbrowser control that uses the trident web rendering engine. I believe this is MSHTML.DLL? Anyway, some of the users of my programs have complained of a few things. Particularily,
1. It seems to be a slow browser, at least compared to other rendering engines out there (webkit and gecko are 2 known ones).
2. On the developer side, it seems to be low in features. The features are sufficient in most cases, but there are some "special" things that I need.
3. It has VERY low HTML (and especially HTML5) compliance.
My question is, how much work would it take to use a different engine (such as webkit .net, which I HAVE heard of) and be able to distribute it easily. Or, if you guys feel ambitious, we could try writing a brand new engine ourselves. I know how big of a job it is, and frankly, I have no clue where to begin. I would just like your thoughts and opinions on the matter.
i have created an app to load an access database into a datagridview, which contains web urls. When button is clicked it webbrowser1 navigates to each url and each webpages document.inertext is put into textbox. This all work fine but after a while the webbrowser navigation becomes increasingly slower.
For Each RW As DataGridViewRow In Me.DataGridView1.SelectedRows '''''''''''#######cell values into strings ########'''''''''''''' If RW.Selected = True Then Dim domain As String
I'm using VB2008 Express. And I've been working on a "popup" to select a date range. The DateTimePicker isn't ideal because the purpose is to pick a date range, which will always be one full week, from Sunday through Saturday. The control works just fine and I'm pretty proud of it. My problem has to do with the border added when using ToolstripControlHost for this. I've included a screenshot and my code.
In the code below, assume there exists a button named "btnTimePeriod", below which I desire to show a panel, which contains a few custom items, and the panel's name is "pnlDateRangePicker".IT WORKS... but it doesn't look right. The panel itself is 147 x 326 pixels, but notice in the attached graphic that it's adding a border around the panel which I don't want. There's a border on the top, bottom, and left... but for some reason the border on the right one is especially large. Although my code doesn't expressly set it, AutoSize = true so I would have expected it to shrink around the panel.
As required, my code already does set ShowCheckMargin and ShowImageMargin false. I haven't included the code for the DrawDateCalander Sub because it's not relevant. I believe even a blank panel would yield the same result. I have no idea where this margin is coming from.
Private Sub btnTimePeriod_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnTimePeriod.Click Call DrawDateCalendar(DatePart(DateInterval.Month, FirstDisplayedSunday), DatePart(DateInterval.Year, FirstDisplayedSunday)) Call ShowControlBelow(btnTimePeriod, pnlDateRangePicker) End Sub
im trying to make a popup blocker type message box that pops up when a popup tries to load a page, and it asks The page [URL]is trying to open,open in a new tab?
(label) No (button) Yes (button)
how would i make a menu appear when i click somwhere on the page,how would i make it recognise a picture, and be able to copy it to a location on the local drive?
I'm trying to use the WebKit-component ([URL]) in VB with the help of Visual Studio 2008. This is running without problems, except for two following two issues:
1. Hints/Tooltips are not shown (e.g. as there usually will appear one if you stay with the mouse over the Google-logo)
2. If there's a popup-window, I don't know how to get the new desired URL.
This control takes in an array and plots a bar chart type 'count' along the Y axis for a corresponding X location. A user has requested to be able to mouse hover over any location on the graph and have it display the X and Y coordinates.
Option Strict On Option Explicit On Imports System.Windows.Forms
I have a problem I am trying to set the parent textbox from the modal popup.
Although I found the control from the modal popup with the below code DirectCast(Parent.Page.Form.FindControl("ContentPlaceHolder1").FindControl("myAccordion").FindControl("txtTo"), TextBox).Text = str
This is being called on button click when the user has finished selecting from the Checkboxlist.
When the parent page is shown again though the textbox is empty.
The scenario of my user control is that a user is to select from a checkbox list which is a list of emails.
When done has been clicked then it is required that the selected emails be forwarded to the parent webpage.
Then the To Textbox in this case will be filled with the emails that the user has selected.
I'm working with a Silverlight Popup control (SL4). I would like to update data shown on that popup every time the user opens it (IsOpen=true) by passing a string and calling a Private method located in the Popup control behind code to fetch updated data.
I was hoping to place code to make this happen in the Opened event of the Popup, but such an event does not seem to exist (even though I found some documentation on it).
I have a usercontrol that has a popup that displays another usercontrol when the user selects an item from a listbox. When the parent initializes, all the usercontrols initialize.
Ive tried to edit option on the webbrowser control, example javascript enable/disable. but found out that it uses IE's option and cannot be changed.So my question is: Is there a way to do a "webbrowser" without using the WEbbrowser control that is based on internetexplorer? If it is, can i change option example flash and so on?
how I can control the tool tip popup or make calls to the text that displays based on a integer value. I'm wanting it to display a text based on a interger value inside an if statment for a picture box. So if the ingteger = 1 then tooltip.text = "" else tooltip.text = "" but that is not the correct syntax.
