I've been trying to know how to delete all the cookies of a domain, created by using the WebBrowser control.I know that to invalidate a cookie, it's necesary to set its expiration date in a point of the past (a negative value), but all the information I found is for web developing aplications, and I'm using a form.
View 4 RepliesI'm attempting to delete all cookies under a certain URL. How exactly would I go about completing that? For example, I want to delete all the cookies under [URL]. How would I do that?
View 4 RepliesI am using Visual Basic/Visual Studio 2011 Beta I have a series of web sites I program webbrowser1 to navigate to. It is a simple program. The problem I am having is that the websites remember me from the last visit from my cookies(?). Even if I have webbrowser1 click on the logout link, the next time I visit that site I am still logged in! I want the webbrowser to arrive at the website each time as if for the first time ever there, with no record of anything on that site that was done before.
[Code]...
I use a webbrowser control in my VB.Net Program, and I want to delete all the cookies from the computer. How can I do that?And also how is it possible that I enter some site through my Internet Explorer, and it sets a cookie on my computer, and then I try to enter the same site through the webbrowser control in my program and it doesn't recognize that cookie? It uses the same browser, isn't it?
View 6 RepliesHow can i delete a webbrowser1 cookies? from a button press
View 1 Repliesis there anyway that I could delete the cookies that my web browser stores when I visit a certain page. I don't want to delete all the cookies for internet explore, just the ones for my web browser
View 1 RepliesI'm trying to delete cookies from my webbrowser control with this code: Form1.WebBrowser1.Document.Cookie.Remove(0, (Form1.WebBrowser1.Document.Cookie.Count - 1))
I think this works (not sure how to check) but if my webbrowser doesn't have ANY cookies yet, it shows this error: System.ArgumentNullException was unhandled
So basically, If my code is correct, I need some sort of error handling to check that there are cookies (if that is the issue?). I tried this code but it shows the same error: If Form1.WebBrowser1.Document.Cookie.Count > 0 Then
Form1.WebBrowser1.Document.Cookie.Remove(0, (Form1.WebBrowser1.Document.Cookie.Count - 1)) End If
Does anyone know how I can delete my flash cookies from my internet explorer browser every couple seconds?
I know how to delete regular cooking but I need to delete flash cookies as well.
Suppose I have webbrowser in mine form..Is it possoble to capture only the cookies create by mine webbrower..suppose before starting the project,in mine cookies folder there are cookies names cookie1 & cookie2....Suppose after the project run.cookies created by mine project are named cookie3 & cookie4...I want to delete cookie3 & cookie4 only..
View 5 RepliesSuppose I have webbrowser in mine form..Is it possoble to capture only the cookies create by mine webbrower..suppose before starting the project,in mine cookies folder there are cookies names cookie1 & cookie2....Suppose after the project run.cookies created by mine project are named cookie3 & cookie4...I want to delete cookie3 & cookie4 only.
View 2 RepliesI been trying to do this for days can't find a way to do that,ok so for example if you ahead and login into hotmail.com navigate somewhere like "bing.com"
clear cookies with something like For Each cookieFile As String In IO.Directory.GetFiles(Environment.GetFolderPath(Environment.SpecialFolder.Cookies), "*.txt")
[Code]...
Suppose I have webbrowser in mine form..Is it possoble to capture only the cookies create by mine webbrower..suppose before starting the project,in mine cookies folder there are cookies names cookie1 & cookie2....Suppose after the project run.cookies created by mine project are named cookie3 & cookie4...I want to delete cookie3 & cookie4 only..Is there any way to do it?
View 1 RepliesI have a web browser named Webbrowser1 and I wish to have it clear cookies when I click a button.
View 4 RepliesI have a webbrowser control and i wanted to clear cookies / cache in a function, however i cant seem to find the right method.
Now i have a few computers that will be 32bit, 64bit etc. Code I was trying
Function DeleteCookies(ByVal wb As WebBrowser)
wb.Document.Cookie.Remove(0, (wb.Document.Cookie.Count - 1))
Delay(1)
[code]....
what a good code to delete my "Webbrowser1" cookies (not my IE7 cookies !) I would also like this program to delete the Webbrowser1 History & Temporary Files as well, but mainly the cookies. I would like for this program to either delete cookies by a simple click of a button or to set a timer that can erase the cookies every few minutes. Also, if it could show the current cookies before being deleted.
View 5 Repliesi'm making a webbrowser, curectly in version 2. 6. But i need some codes before i can release it.
-Source Code
-Save page as
-Delete Cookies
And if you know some more properties for the webbrowser, like options.
its possible to set the webbrowser cookies as same than httprequest cookies.
Private Sub lol()
Dim request As HttpWebRequest = DirectCast(WebRequest.Create("http://login.ijji.com/postLogin.nhn"), HttpWebRequest)
request.CookieContainer = cokie
[code]...
I am currently helping to write a Visual Basics program that was originally writing with access.The Original Access program has been used and modified over the past 5 years, During that time the database has gotten pretty big.The problem I am having is If I add the entire database to my data sources it creates data tables for every Table and Stored procedure even when they are not currently used in the program resulting in a 20+ minute build time just to debug.I am currently only adding Tables and Stored Procedures as i need them, so its not that much of a problem now, but as I continue to work and add tables the build time is going to go back up, and Id hate to have to wait 20+ minutes to test a small tweak I made.
View 1 RepliesI have a label that displays text kinda like a title to something (autosize = falseTextAlignment = MiddleCenter) and whenever the label control isn't wide enough to display the single line of text it tries to auto-wrap it causing half of the text to be chopped off at the top and half of it chopped off at the bottom. I would rather it stay on a single line and cut the text off from the right
View 1 RepliesIf I create a new class library project in VB.NET, I can create subfolders (a la C#), add WinForm objects to these subfolders, and then specify a namespace:
Namespace Sub1.Sub2
Public Class SomeForm
Public Sub New()
InitializeComponent()
[code]...
This resolves as ProjectRootNamespace.Sub1.Sub2.SomeForm, which is good.However, if I create a new WinForms project in VB.NET, and attempt the same thing, I get this error in the designer:The class SomeForm can be designed, but is not the first class in the file. Visual Studio requires that designers use the first class in the file. Move the class code so that it is the first class in the file and try loading the designer again.Is there a way to have forms in sub-namespaces of a VB.NET WinForms app instead of in the root namespace?
I would like to open a new form from some other form, and pass some selected object from a control on that form to the new form. The sensible way to do this, I thought, was as a parameter to the forms constructor. Now I know that the visual studio GUI creates partial classes for my forms, that hold the properties that I can drag onto there in the designer. I assume it also holds a default constructor. Since it might do all sorts of stuff that is needed to initialise the form, I figured I should call it from my custom constructor ala
public sub new(byval my_parameter as Foo)
Me.new()
Me.my_parameter = my_parameter
[code].....
That clearly wasn't it, because it can't find a default constructor. The thing is, visual studio goes trough great lengths to prevent me from seeing the generated constructor, so I know how to access it. This leads me to believe that I am actually doing it wrong, and should have set out on some different path, as the path you are forced in to usually is the sensible thing to do, which I usualy find out way too late.
Is it better to use friend or public forms in vb.net? What are the advantages of each?I notice when you import a vb6 project, the forms come in as friend, but when you add a new form in vb.net it is public. I have not seen any difference in the way they work, though, so I must be missing something.
View 3 RepliesI have a very simple windows forms setup. Form1 has a progress bar and a button on it, when clicked the button opens Form2 which also has a button on it that launches Form3. On Form3 is a button which I want to use to raise an event back to Form1.To achieve this can I add an event handler on form1 that will listen for an event of the type raised in form3? Or do I have to pass references to form1 to form2 and then from form2 to form3?
View 1 RepliesIn the middle of converting VB6 code to VB.NET, I need to replace the following code that intends to close all open forms remaining in the application.
'close all sub forms
For i = My.Application.OpenForms.Count - 1 To 1 Step -1[code].....
I've replaced the Unload function with Close (as indicated by TFM), but the compiler complains that OpenForms is not a member of My.Application.Where can I access the open forms?
I have a desktop WinForms app that I would like to be able to connect to my Sql Server database that I have through my GoDaddy webhost. Problem is not all ISP's forward the 1433 port (like mine) so I can't connect directly to the DB from any of my home computers without buying the expensive dedicated IP address package, which has me thinking since my website can connect directly to the DB I was wondering if it might be possible for me to make a dll that would have all of the database interaction through subs and functions and all my WinForms app would have to do is connect to that dll through http or something, anyone know if I could do something along those lines?
Reason for this is I would like other people to be able to connect to this database (the winforms app would have screens for creating and managing accounts, etc) without worrying about whether their ISP would block the DB port(s) it would just work.
I am retrofitting unit testing into a fairly complex system designed and written by other developers in VB.net. I am trying to develop unit tests for the GUI forms using NUnit and the NUnit Forms extension. (I've been looking at c# examples that are fairly easy to port over if you have a solution but don't know VB syntax as long as it uses NUnit classes)
I will try and explain what I am doing but first a brief description of the program. It basically monitors server activity. You need to connect to a server via a modal form with IP and Port fields(amongst others). Once you have connected to a server other parts of the program unlock and become usable (such as configuration of the server).
Desired process: Load program > click connect button > modal connect form loads > enter details > click OK to connect > main form updates to logged-in state > other functionality
The problem is that I cannot test the functionality of the connect form and then the logged-in functionality of the program. I can test that it loads the modal connect form correctly; enters the details and clicks OK (all fine so-far) but it does not appear to logically progress the program. The modal form just closes again seemingly without running the connect code from the program back-end and I'm back at the main menu not logged in to anything.
I have a feeling that I've either missed something really obvious or that it's simply not doable in NUnit.I have trawled the internet in search of anything similar but the closest was another SO thread that was really generic. Without being able to actually test the logged-in version of the program, I'm at a major hurdle.Another issue is handling message boxes that don't have unique identifiers (e.g. "are you sure you want to exit?"); these also seem to be a major pain in the arse with NUnit (If it makes any difference, I'm running the tests as a stand-alone project using a reference to the executable file of the built project, not the actual source)
I am deploying a VB.net 2010 winforms application, and when I install it on the client's machine, the install process also installs an instance of SQL Server 2005 Express. The application connects to a central SQL database on the server. To install, I am using the "Publish" option in VS 2010. Why does it do that? There should be no need for a local instance of SQL Express. Is there a way to avoid installing SQL 2005 Express (I know it is free, but I would rather not have it installed if possible).
View 1 RepliesI am retrofitting unit testing into a fairly complex system designed and written by other developers in VB.net. I am trying to develop unit tests for the GUI forms using NUnit and the NUnit Forms extension. (I've been looking at c# examples that are fairly easy to port over if you have a solution but don't know VB syntax as long as it uses NUnit classes)I will try and explain what I am doing but first a brief description of the program. It basically monitors server activity. You need to connect to a server via a modal form with IP and Port fields(amongst others). Once you have connected to a server other parts of the program unlock and become usable (such as configuration of the server).Desired process: Load program > click connect button > modal connect form loads > enter details > click OK to connect > main form updates to logged-in state > other functionality
The problem is that I cannot test the functionality of the connect form and then the logged-in functionality of the program. I can test that it loads the modal connect form correctly; enters the details and clicks OK (all fine so-far) but it does not appear to logically progress the program. The modal form just closes again seemingly without running the connect code from the program back-end and I'm back at the main menu not logged in to anything. I have a feeling that I've either missed something really obvious or that it's simply not doable in NUnit. I have trawled the internet in search of anything similar but the closest was another SO thread that was really generic. Without being able to actually test the logged-in version of the program, I'm at a major hurdle.Another issue is handling message boxes that don't have unique identifiers (e.g. "are you sure you want to exit?"); these also seem to be a major pain in the arse with NUnit(If it makes any difference, I'm running the tests as a stand-alone project using a reference to the executable file of the built project, not the actual source)
I'm using the following code to validate the text entered by user. It works perfectly fine. But I want to add the backspace feature so as to allow the user to delete the wrongly entered number.I have tried a couple of things and they worked but before last digit (after the decimal point) i.e. it does not allows to delete after the number has been completely entered.number is being entered in the format: 12313213.45
What shall I do?Private Sub TextBox5_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox5.KeyPress
[Code]...
how to do word wrap in drawstring in vb.net 2005.
View 2 Replies