In the middle of converting VB6 code to VB.NET, I need to replace the following code that intends to close all open forms remaining in the application.
'close all sub forms
For i = My.Application.OpenForms.Count - 1 To 1 Step -1[code].....
I've replaced the Unload function with Close (as indicated by TFM), but the compiler complains that OpenForms is not a member of My.Application.Where can I access the open forms?
I am using MDI form and nearly more than 10 child forms.. Here, When i load or unload some forms, it flickers very much.. It is not as much good.. So i need to avoid this.. How to avoid form flickering?
I'm just wondering, what is the best way to load and unload forms with visual studio 2005. In VB6, I used to use the following at a button click, for example.
VB 6.0 Private Sub Form_Unload(Cancel As Integer) VB.NET 2008 VB 6.0 Private Sub Form_QueryUnload(Cancel As Integer, UnloadMode As Integer) VB.NET 2008
I have created a tab control and few forms. Each form opens in a separate tab when a button is clicked
I have take care so that the form does not open again in a new tab if its already open. But I am having trouble bringing the tab to focus.I want to Select the From in the tab and bring it to focus if its already in the tab list.
I want to find the framework class that enables one to choose an image at design-time. I can find the editor that is used at run-time - its the Drawing.Design.ImageEditor. At design time, however, a different editor pops up which allows one to choose an image from resources.I'm guessing I could run some kind of program, then open up the image editor, from the property grid, and see what new windows/classes have been created?
I've been trying to know how to delete all the cookies of a domain, created by using the WebBrowser control.I know that to invalidate a cookie, it's necesary to set its expiration date in a point of the past (a negative value), but all the information I found is for web developing aplications, and I'm using a form.
I am currently helping to write a Visual Basics program that was originally writing with access.The Original Access program has been used and modified over the past 5 years, During that time the database has gotten pretty big.The problem I am having is If I add the entire database to my data sources it creates data tables for every Table and Stored procedure even when they are not currently used in the program resulting in a 20+ minute build time just to debug.I am currently only adding Tables and Stored Procedures as i need them, so its not that much of a problem now, but as I continue to work and add tables the build time is going to go back up, and Id hate to have to wait 20+ minutes to test a small tweak I made.
I have a label that displays text kinda like a title to something (autosize = falseTextAlignment = MiddleCenter) and whenever the label control isn't wide enough to display the single line of text it tries to auto-wrap it causing half of the text to be chopped off at the top and half of it chopped off at the bottom. I would rather it stay on a single line and cut the text off from the right
If I create a new class library project in VB.NET, I can create subfolders (a la C#), add WinForm objects to these subfolders, and then specify a namespace:
Namespace Sub1.Sub2 Public Class SomeForm Public Sub New() InitializeComponent()
[code]...
This resolves as ProjectRootNamespace.Sub1.Sub2.SomeForm, which is good.However, if I create a new WinForms project in VB.NET, and attempt the same thing, I get this error in the designer:The class SomeForm can be designed, but is not the first class in the file. Visual Studio requires that designers use the first class in the file. Move the class code so that it is the first class in the file and try loading the designer again.Is there a way to have forms in sub-namespaces of a VB.NET WinForms app instead of in the root namespace?
I would like to open a new form from some other form, and pass some selected object from a control on that form to the new form. The sensible way to do this, I thought, was as a parameter to the forms constructor. Now I know that the visual studio GUI creates partial classes for my forms, that hold the properties that I can drag onto there in the designer. I assume it also holds a default constructor. Since it might do all sorts of stuff that is needed to initialise the form, I figured I should call it from my custom constructor ala
public sub new(byval my_parameter as Foo) Me.new() Me.my_parameter = my_parameter
[code].....
That clearly wasn't it, because it can't find a default constructor. The thing is, visual studio goes trough great lengths to prevent me from seeing the generated constructor, so I know how to access it. This leads me to believe that I am actually doing it wrong, and should have set out on some different path, as the path you are forced in to usually is the sensible thing to do, which I usualy find out way too late.
Is it better to use friend or public forms in vb.net? What are the advantages of each?I notice when you import a vb6 project, the forms come in as friend, but when you add a new form in vb.net it is public. I have not seen any difference in the way they work, though, so I must be missing something.
I have a very simple windows forms setup. Form1 has a progress bar and a button on it, when clicked the button opens Form2 which also has a button on it that launches Form3. On Form3 is a button which I want to use to raise an event back to Form1.To achieve this can I add an event handler on form1 that will listen for an event of the type raised in form3? Or do I have to pass references to form1 to form2 and then from form2 to form3?
I have a desktop WinForms app that I would like to be able to connect to my Sql Server database that I have through my GoDaddy webhost. Problem is not all ISP's forward the 1433 port (like mine) so I can't connect directly to the DB from any of my home computers without buying the expensive dedicated IP address package, which has me thinking since my website can connect directly to the DB I was wondering if it might be possible for me to make a dll that would have all of the database interaction through subs and functions and all my WinForms app would have to do is connect to that dll through http or something, anyone know if I could do something along those lines?
Reason for this is I would like other people to be able to connect to this database (the winforms app would have screens for creating and managing accounts, etc) without worrying about whether their ISP would block the DB port(s) it would just work.
I am retrofitting unit testing into a fairly complex system designed and written by other developers in VB.net. I am trying to develop unit tests for the GUI forms using NUnit and the NUnit Forms extension. (I've been looking at c# examples that are fairly easy to port over if you have a solution but don't know VB syntax as long as it uses NUnit classes)
I will try and explain what I am doing but first a brief description of the program. It basically monitors server activity. You need to connect to a server via a modal form with IP and Port fields(amongst others). Once you have connected to a server other parts of the program unlock and become usable (such as configuration of the server).
Desired process: Load program > click connect button > modal connect form loads > enter details > click OK to connect > main form updates to logged-in state > other functionality
The problem is that I cannot test the functionality of the connect form and then the logged-in functionality of the program. I can test that it loads the modal connect form correctly; enters the details and clicks OK (all fine so-far) but it does not appear to logically progress the program. The modal form just closes again seemingly without running the connect code from the program back-end and I'm back at the main menu not logged in to anything.
I have a feeling that I've either missed something really obvious or that it's simply not doable in NUnit.I have trawled the internet in search of anything similar but the closest was another SO thread that was really generic. Without being able to actually test the logged-in version of the program, I'm at a major hurdle.Another issue is handling message boxes that don't have unique identifiers (e.g. "are you sure you want to exit?"); these also seem to be a major pain in the arse with NUnit (If it makes any difference, I'm running the tests as a stand-alone project using a reference to the executable file of the built project, not the actual source)
I am deploying a VB.net 2010 winforms application, and when I install it on the client's machine, the install process also installs an instance of SQL Server 2005 Express. The application connects to a central SQL database on the server. To install, I am using the "Publish" option in VS 2010. Why does it do that? There should be no need for a local instance of SQL Express. Is there a way to avoid installing SQL 2005 Express (I know it is free, but I would rather not have it installed if possible).
I am retrofitting unit testing into a fairly complex system designed and written by other developers in VB.net. I am trying to develop unit tests for the GUI forms using NUnit and the NUnit Forms extension. (I've been looking at c# examples that are fairly easy to port over if you have a solution but don't know VB syntax as long as it uses NUnit classes)I will try and explain what I am doing but first a brief description of the program. It basically monitors server activity. You need to connect to a server via a modal form with IP and Port fields(amongst others). Once you have connected to a server other parts of the program unlock and become usable (such as configuration of the server).Desired process: Load program > click connect button > modal connect form loads > enter details > click OK to connect > main form updates to logged-in state > other functionality
The problem is that I cannot test the functionality of the connect form and then the logged-in functionality of the program. I can test that it loads the modal connect form correctly; enters the details and clicks OK (all fine so-far) but it does not appear to logically progress the program. The modal form just closes again seemingly without running the connect code from the program back-end and I'm back at the main menu not logged in to anything. I have a feeling that I've either missed something really obvious or that it's simply not doable in NUnit. I have trawled the internet in search of anything similar but the closest was another SO thread that was really generic. Without being able to actually test the logged-in version of the program, I'm at a major hurdle.Another issue is handling message boxes that don't have unique identifiers (e.g. "are you sure you want to exit?"); these also seem to be a major pain in the arse with NUnit(If it makes any difference, I'm running the tests as a stand-alone project using a reference to the executable file of the built project, not the actual source)
I'm using the following code to validate the text entered by user. It works perfectly fine. But I want to add the backspace feature so as to allow the user to delete the wrongly entered number.I have tried a couple of things and they worked but before last digit (after the decimal point) i.e. it does not allows to delete after the number has been completely entered.number is being entered in the format: 12313213.45
What shall I do?Private Sub TextBox5_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox5.KeyPress
I have no idea what I have done wrong here, so I'll just attach my project as a zip file and see if any of you are kind enough to look into it for me.I am reasonably experienced in C#.NET but having trouble using VB.NET for a school assignment.I cannot open half of my forms in designer view because "To prevent possible data loss before loading the designer, the following errors must be resolved".
i was doing a fair amount of programming many years ago, like 10 it feels like, so I'm sorely not up to date on how my newly downloaded Visual Basic Express expects me to communicate with it.I am writing a program that pulls a cell from a database after the user has gone through several forms to determine which cells they want. When I write it like that, it doesn't sound very efficient, but I've designed it this way for usability.Here's where I have a problem: Should I store the path the user takes in a string, an array, what?
Here's an example:Someone wants baseball stats and trivia. They run my program, main form pops up, they select National League button, the NL Form pops up. Now the way my program is set up right now, is there are two ListBoxes on the form, one is populated, and as the user selects a Team from ListBox1, it jumps to ListBox2. Once they've selected all the teams they want info for, they click a button Next.
What I now need the program to do is show the next form "Team: name" once for each team, and insert the name of the team on the form in the appropriate label which I'll have blank. This form will also do the Listbox thing except the first listbox will populated with Topics like HR Stats, Pitching Stats, Coach History, etc.
is it a bad idea to create separate parts/winforms of the same application (using the same SQL Server DB) in different executable files. For example for a School IS: A Receptionist App, A Teacher App, A Principal App and so on.
I am writing an application in which a user is doing a file conversion. I have a set of tools that can perform the conversion on the fly via command line, but I'm not entirely sure of how to go about passing the parameters I need to the command line and running them. Can someone point me to the right direction?Would I just create a System.Diagnostics.Process and use that? If so how do I do the line by line command? For instance if I need to issue a cd command to change the directory and then execute a command after that how would I do that?
In C# Windows Forms, a user control's InitializeComponent is called from the form's/control's constructor. When I create same scenario in VB.NET I don't get a constructor, and I can't locate a place where InitializeComponent is called.I need to call my code between InitializeComponent and when the control's Load event is raised, preferably still in the control's constructor. How do I do this in VB.NET?
I have made a vb.net application which has 63 forms. On each form label2 should contain the username using the application. The first form displayed to the user is the login form. When the user clicks the login button on this form the user name in all newly opened windows should appear inside label2. How can I do this?
I have two forms frmMain and frmNew, and one module modMain. In modMain I hold public variables which are needed for application. My question is how to open and close those two forms when needed? I ask this because if i set frmMain as startup form, then when closed, application will end, and one of those two forms will always be displayed. Also if I set frmNew as startup form, then when I close this form, application will also end. Is there a way to do this from module or something so my application won't end after closing and opening any of those two forms?
I have a Windows Forms app that, unfortunately, must make calls to controls from a second thread. I've been using the thread-safe pattern described on the [URL].. Which has worked great in the past.
The specific problem I am having now: I have a WebBrowser control and I'm attempting to invoke the WebBrowser.Navigate() method using this Thread-Safe pattern and as a result I am getting StackOverflow exceptions. Here is the Thread-Safe Navigate method I've written.
I have a grid containing rows flagged with different priorities. I want to color the high priority rows red, low ones blue, etc. I'd like to set the shade based on a mathmatically calculated gradient rather than arbitrarily assigning colors to specific priorities. How can I extract a single color from a single point along gradient?