Forms :: VS2008 Show Buttons In A Region?
Jul 26, 2010
I have a Rectangle (the class) that I'm using to define a region on a form and when the mouse enters that region it shows 2 buttons (which are on the form and within the bounds of the rectangle) and I would like the buttons to remain visible when the mouse is over either of the 2 buttons then when the mouse leaves the region or leaves the form they are set to invisible again. Here's the code I have so far:
Private m_TitleColor As Color
Private Const m_TitleHeight As Integer = 30I
Protected Overrides Sub OnPaint(ByVal e As System.Windows.Forms.PaintEventArgs)
[code].....
View 2 Replies
ADVERTISEMENT
Jul 26, 2010
I have a Rectangle (the class) that I'm using to define a region on a form and when the mouse enters that region it shows 2 buttons (which are on the form and within the bounds of the rectangle) and I would like the buttons to remain visible when the mouse is over either of the 2 buttons then when the mouse leaves the region or leaves the form they are set to invisible again. Here's the code I have so far:
[code]....
The problem is when the mouse enters the bounds of the button, the form's MouseLeave event fires and thus my buttons are hidden which means the user can't click either of them either.
View 6 Replies
Nov 30, 2010
I have a form with two group boxes. The first one has two radio buttons and the second has four. The user chooses one button from the first group box and one button from the second which gives me eight selections and I would like a different picture for each selection.
View 5 Replies
Feb 17, 2011
I have a custom-shaped form created by setting the Region to an image. I want to be able to highlight the edge of the form when it has focus. To do this I believe I need to get the outline of the form and convert it to a path so I can draw a two-pixel highlight around the edge of the form.
(1) Is this the correct approach?
(2) If so, how do I get the outline of the region so I can call DrawPath?
View 3 Replies
Jul 16, 2009
To refresh or invalidate only a region of the form.sometimes I will need refresh all the form, but in some situations only specific regions of the form..I saw some samples on the Microsft site, but I don't understood.I use VB .net 2008
View 3 Replies
Sep 1, 2010
I have 7 Windows forms.The order of the forms is defined within a configuration file.I want to place buttons on each form that will show the next available options.The Next button will move the next form in the list.The Back button will move to the previous form in the list. The Finish button will execute the final piece of code.The Cancel button will exit the application.If the user is on the first form, then there is no Back button.If the user is on the last form, then there is no Next button, but there is a Finish button.
Example 1:
Form1 - Next, Cancel
Form3 - Next, Back, Cancel[code]....
View 2 Replies
Feb 4, 2009
I am trying to create a basic windows form on VS2008. I dont see intializecomponent() method in my form. Also, I added a few controls on to the forms and set few properties for those controls on design view. Where is that code getting stored?? it isnt on the code behind file.
I know thr is no html code behind file for window forms?? also, where is intializecomponent method. Please help me out. I have been trying to find this out for such a long time now.
View 6 Replies
Jul 1, 2011
I want to save data from web and desktop applications and then provide that info again to fill the forms with the saved data .I am using vs2008 and sql2005
View 3 Replies
Jun 18, 2010
I am creatting an windows application software in which many controls like Buttons, textBox, combobox are remain same in 12 different form. In this 12 diff form the activity of those controls will remain same.The scenareo id
1. I have 12 forms.
2. Each form containing 3 labels (Country, State, City). These labels indicates 3 combobox from which we can select location.
3. Now I need to use these 3 controls in all 12 forms with same activity.
4. When I change forms to another, these buttons shud remain same.
View 3 Replies
Jun 22, 2010
I made a form with only 1 Button. I want that when i click that button, 2 more buttons should be appeared. Example: Button1 is clicked. Button2 and Button3 are displayed. I have named Button1 as Scan. When i click on Scan, the Button2(Pause) and Button3(Stop) should be displayed. When it is scanning, i have placed the progress bar with the timer. When the progress bar finishes loading, Button2(Pause) and Button3(Stop) should be hidden again.
[Code]...
View 4 Replies
Dec 24, 2009
I have two buttons: show button and next button. I want the show button to show the first result and then for every click of the next button, I want to go the the next result. I did this code for the show button:
cmd.Parameters.AddWithValue("@sex", TextBox4.Text)
dr = cmd.ExecuteScalar
If dr.HasRows Then
While (dr.Read)
TextBox1.Text = dr(0)
[Code] .....
Now the number of rows returned is 5. But on clicking the show button I can see only the last row in the textbox's. Then how to see the first row by clicking the show button? And how to see all rows one after another by clicking the next button? I need to use:
dr.NextResult()
to loop through the fetched data. But I cant place it properly in the next button code. How to do the code for show and next button to get the desired result?
View 2 Replies
Sep 19, 2008
I am creating an application for Windows Mobile 6 in Visual Studio 2005. I have a TabStrip on the main form. There are 2 buttons i want at the top of the tab strip, but i don't want them to be part of it. I need the same buttons to show when the tabs change. I used to use the ZOrder function or Parent function but can't see how to do it in the new version. Any ideas?
View 4 Replies
Aug 28, 2009
I've been looking all over and i can't find an answer to this syntax problem. I want to show a message box with multiple lines before the buttons. This is my latest try:[code]How do you do this? Also, is there a way to have text AFTER the buttons?
View 12 Replies
Oct 27, 2011
I searched for this topic and all the examples are in C# (and they have errors as they will not convert with a C# to VB converter). I am using VB.net 2005 and would like a sample that work for it. I have a loop that goes thru the DataGridView and changes the row color based on a column/cell value from the binded DataTable (shown below). I'd like to add to the loop (where the comment is) and also hide the button for this cell and let the "In Process" show in the cell instead.
Private Sub ColorInProcessItems()
' Color the rows green if they are In Process, red if they are Complete
For Each row As DataGridViewRow In dgvQueue.Rows
[code]....
View 3 Replies
Dec 10, 2011
after many weeks of annoying compatibility with windows xp, I realized that I should change the .netbar buttons to standard windows buttons. When I did this, and put the button on the transparency area and then debugged the application. I found out that the transparency add-in made the text inside the button transparent: How can I make the text show just the color, not transparent?
View 3 Replies
Mar 29, 2010
Can anyone tell me why the buttons in the development and in the runtime look different? Buttons.jpg Top is how the button looks like at runtime.Bottom is how the button looks like at development.
View 4 Replies
Jun 26, 2011
I am working on this app and decided to add a listbox to the form since a listbox can contain objects. The objects I decided to add are buttons. When I launch my app. I see the listbox and what appears to be where the buttons are but no text is being displayed. Maybe I am missing the point of the listbox. Can I have buttons in the listbox and have the text display for the bottons?
View 1 Replies
Jan 8, 2012
I have a button in my windows form using vb.net when I actually clicked the button something happen then when I press any keys like enter or space, it focuses on the button since it was clicked and the codes in my button is the one that is executing rather than the codes in my enter or space key. I think it means that the button is being pressed when I hit spacebar and enter because there is a blue border in the button. When I click a button the focus remains on the button. I don't know how to remove that.
View 5 Replies
Nov 13, 2010
Firstly though, I'll have to mention that I'm a relative newcomer to vb.net and don't really know that much about advanced functions.I have my main form which dynamically generates 15 buttons.
Each of these buttons will need to open another form, depending on which form has been assigned to that button in a config file (the config file isn't yet done, as I want to get it working simply by hardcoding the name of the forms for the time being)
The way I have it in my head is that I would assign the form name that needs to be open to the name of the button, if that makes sense....However, I have absolutely no clue how to do it, I've tried a couple of things but to no avail.
Here's my code, and I have no problem changing any part of it if it will help things along, this is just the only way I know how to create dynamic buttons.[CODE...]
View 8 Replies
Dec 4, 2008
Is it possible to make custom buttons for the forms? I know i can add imaging to the button controls, but if is it possible to really customize the buttons so they look different, like designs instead of blocks?
View 3 Replies
Nov 14, 2011
I have a basic math test program, and 2 forms to allow the user to choose which function to test on.
The first form has a list of radio buttons with the 4 basic math functions and a button to load the next form.The second form contains this code on Load..
[Code]...
frmOptions has 4 radio buttons, addition is default chosen.After selecting one, the user clicks a button to open frmTest.The above code runs upon first load to change a label to reflect what was chosen on frmOption above.
On step 3, the label on frmTest that is supposed to be changed based on the Checked radio button from frmOption never changes. It doesn't even change on the first load of the form, so I think something is wrong with the Checked property of the radio buttons.
View 3 Replies
Oct 25, 2009
When you complete various feats in my program, on a form called "User Details" there is a label with the text that says "Complete" only when you have completed a particular game. There is a save button, and a load button, all on different forms. How could I make a save and load feature? One that saves the fact you've completed certain games - and then when you press load after exiting and reentering the program, the Complete text will reappear.
View 9 Replies
Mar 3, 2012
I have a piece of software with two tabs, inside each tab there are buttons (the user can add the buttons when they want). when tab1 is full tab2 should start to fill. I currently know how many buttons fit on the screen so I just say something like if buttons > 150 then start to populate tab 2 The problem i have now though is if the resolution is changed then a different amount of buttons can be displayed. so if I put my screen to 1280x720 some buttons are left of. I was thinking of detecting the resolution and then using different cases for different resolutions but this seems very inefficient im wondering if there is a different way?
View 5 Replies
Apr 16, 2009
How can i put a scrolling a buttons?I want a put a multiply buttons vertically and when it the control exist beyond there size of the form will automatically show a scroll bars...Is there have a control that i have to use?
View 6 Replies
Nov 2, 2009
How do I make a connection between a button and textbox when using windows form applications. In other words, if a button is clicked on, how do I assign it to read that certain textbox where the information was entered?
View 4 Replies
Feb 3, 2010
Just a quick question, using Visual Basic 2008, is there a way to change the text of a forms buttons and other objects during runtime so that the text sticks no matter if the form is closed and reopened or not? I can get the text to change, but after closing the window and reopening, the text resets. Is this possible?
View 2 Replies
May 21, 2011
I'm making a program which will work minimized in the system tray.Now, what it have to do is to load a page [URL] and then input a specific string which i have stored, into this element:
HTML Code:
<input name="ctl00$ctl00$JobnetBaseMiddelContent$LoginContentPlaceHolder$txtUsername" type="text" id="ctl00_ctl00_JobnetBaseMiddelContent_LoginContentPlaceHolder_txtUsername" class="text required" style="width:183px;">
and another string into this one:
HTML Code:
<input name="ctl00$ctl00$JobnetBaseMiddelContent$LoginContentPlaceHolder$txtPassword" type="password" id="ctl00_ctl00_JobnetBaseMiddelContent_LoginContentPlaceHolder_txtPassword" class="text required" style="width:183px;">
and then press this button:
HTML Code:
<input type="submit" name="ctl00$ctl00$JobnetBaseMiddelContent$LoginContentPlaceHolder$btnLogon" value="Log ind" id="ctl00_ctl00_JobnetBaseMiddelContent_LoginContentPlaceHolder_btnLogon">
After that, it would login to the website, and would afterwards press on another button.Each week, i have to login to a website, and press a button in order to keep my current economic status. Which is quite meaningless. Therefore, having a program to press it for me, working in the background, would be so much easier, and make me not forget it?
Ps.The elements info's were received using Google Chrome's "View Element Details".
View 4 Replies
Jun 6, 2011
I have a form which gets populated by 15 buttons dynamically at runtime (these need to be dynamic as there will be a user config file at some point)What I need these buttons to do is to open a specific form when clicked. Which form that opens will be dealt with in the config file.
Public Class frm_MainScreen
Private Sub frm_MainScreen_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim count As Integer
Dim ImageDir As String
[code].....
View 2 Replies
Jun 8, 2011
I have a grid which users enter their contact information - fname,lname then phone number.
I want to know how i can when the usr clicks a button create an extra row of input boxes
And if possible be told how to make the form scrollable, so i can have many, many input boxes present when required
View 5 Replies
Apr 15, 2010
i want to create two type radio button one for sex(male/female) and another for marital status (married /un-married) how it possible. when i create four radio button for this two type of control,then i got only one type control of all radio button
View 2 Replies