Hide Buttons And Then Show Them When Another Button Is Clicked?
Jun 22, 2010
I made a form with only 1 Button. I want that when i click that button, 2 more buttons should be appeared. Example: Button1 is clicked. Button2 and Button3 are displayed. I have named Button1 as Scan. When i click on Scan, the Button2(Pause) and Button3(Stop) should be displayed. When it is scanning, i have placed the progress bar with the timer. When the progress bar finishes loading, Button2(Pause) and Button3(Stop) should be hidden again.
[Code]...
View 4 Replies
ADVERTISEMENT
Nov 28, 2011
How do you hide a user control when a button is clicked? I know how to hide a form but not a control. If it is possible to actually remove the usercontrol from the panel that would be awesome to and then have it show again once I click the other Icon. [cod]e...
View 39 Replies
Oct 27, 2011
I searched for this topic and all the examples are in C# (and they have errors as they will not convert with a C# to VB converter). I am using VB.net 2005 and would like a sample that work for it. I have a loop that goes thru the DataGridView and changes the row color based on a column/cell value from the binded DataTable (shown below). I'd like to add to the loop (where the comment is) and also hide the button for this cell and let the "In Process" show in the cell instead.
Private Sub ColorInProcessItems()
' Color the rows green if they are In Process, red if they are Complete
For Each row As DataGridViewRow In dgvQueue.Rows
[code]....
View 3 Replies
Oct 7, 2010
31 command buttons, labeled each number of the month, when clicked button changes to color red.
View 1 Replies
Aug 26, 2009
this should take a matter of seconds for someone to sort out, I wish to show a decimal value less than zero when button one is clicked ie
[Code]....
View 5 Replies
Dec 11, 2010
I wanted to know how I could make a button and textbox appear when a different button is clicked. For example, when I click "Button1," which is already there, then "Button2" and "Textbox2" (I already have a "Textbox1") would show. I also already have an "openFileDialog" on "Button1."
At first I thought I should use
If Button1_Click Then
but I didn't know what to put after that. Is there any way I could use "If... ...Then..."? I find those easy to understand.
View 6 Replies
Mar 3, 2010
using System;
using System.Collections.Generic;
using System.ComponentModel;
[Code].....
So what I am trying to do is to get textBox1 to show which button i have clicked. Because I have Form_Activated I only see changes when i reactivate the Form. So I would like to have Event that is Active all the time and listens to everything that happens in Application and NOT only when something is clicked or some text have changed.
View 6 Replies
Mar 14, 2009
I have a form that I am adding a set of buttons to. I am adding an event to those buttons. I need this event to function slightly to determine what button was pressed.
I need the button to simply set a string variable equal to the clicked buttons text so I can determine what button was pressed.
How can this be accomplished?
''Adding the buttons''
For Each dr In dtMenus
Dim strMenuName As String
strMenuName = dr.Item("strMenuName").ToString
[CODE]...
View 5 Replies
Jan 28, 2012
CODE:
Is there an easy way to do it or better code than mine because this is just a simple there will be like 400 button and to show and hide every 70 will be long code.
View 9 Replies
Jan 22, 2010
Show/Hide application button in Taskbar
View 7 Replies
Dec 28, 2010
For Windows XP this code works fine:
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long Private Declare Function SetWindowPos Lib "user32" (ByVal hWnd As Long, ByVal hWndInsertAfter As Long, ByVal X As Long, ByVal Y As Long, _ ByVal cx As Long, ByVal cy As Long, ByVal wFlags As Long) As Long
[Code]...
View 3 Replies
Feb 5, 2010
What I would like to do is to have four different buttons (e.g., buttonA, buttonB, buttonC and button D). I wanna give the following instruction to the people: press these buttons in the following order: first buttonA, then buttonB, then buttonC and last buttonD. If they obey this instruction then a picture will be displayed, for instance a happy face. All the other combinations will not activate this picture to be displayed, or in other words, there won't be any consequence. I would also like to save this data using windows note pad e.g., writeline (1, xxxxxx). Is there any chance I will make it?
View 1 Replies
Jun 12, 2009
get a button on form A to open form B and then close (not hide) form A when clicked?Background: I am coding a VSTO application for Excel in VB2008.
Private Sub FormAButton_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles FormAButton.Click
Dim FormB As New FormB
[code]....
View 1 Replies
May 5, 2012
I'm curious if it is possible to hide a group of text boxes from view in a form until a particular condition is met, and to have a custom set of text boxes for that condition. To give an example; I want radio buttons offering choices for a manner of searching records, the user selects one and then a specific set of text boxes are displayed for the user to utilize, if a different option is chosen a different set of text boxes will be shown. Is this something that can be done?
View 7 Replies
Oct 30, 2010
Using 2 forms how would I click one button, from another form? ie In VB 4,5,6, I would used to do it as:-
Form 1:
private sub Command1_Click()
msgbox "Say Hello"
End Sub[code].....
If I clicked the button in form2, it would automaticlly, click the button in form1. Do I, do it the same way in VB Express or has it changed?
View 5 Replies
Sep 15, 2011
I want to make a small app that has three buttons on screen that when clicked, they act as keyboard input. For example, I have an application that uses a drop down list to choose a letter, number or shape. You can select using the mouse or just type in what you want. However, I cannot type in the shapes that I need, I must use the mouse to scroll through a long list in order to select the shape I need.
My initial solution was to just use alt codes..but they are long and I can't figure out a way to customize them the way I want. So I just figured why not just make a small VB app and click the button of the shape I need which would send the alt code information like I typed in using the keyboard.
So if my app has a star button, when I click it, it will be interpreted as I just entered the alt code for that star but I really just clicked a button.
Unless there is another way to allow me to create custom alt codes or modify the ones windows has for these shapes. I'm certainly open to any ideas or advice and would be grateful for help. Thank you!
View 1 Replies
Jun 9, 2012
I already have this code from another question on this website.
Help.ShowHelp(ParentForm,
("C:UsersBeaudeanDesktopHelp.chm"),HelpNavigator.TableOfContents, Nothing)
That works fine except i need the location of the chm help file to point to "my.resources" where it exists because i need to install my program but in that code example it only works with strings?
View 1 Replies
Jun 22, 2010
I'm trying to hide 5 to 12 buttons on a form until a screenshot is saved to the clipboard. I have it set right now so the user clicks a button(btnSavePDF) and then whichever buttons are visible are made not visible. But I haven't a clue how to restore just those buttons. I'm trying to avoid restoring them all unless they were all originally visible.
[Code]...
View 4 Replies
Sep 12, 2011
If i place 20 different buttons on my form, how can i hide them using the for each function or any other function instead of writing the following for each button[code].;..
View 1 Replies
Apr 9, 2011
i am having a problem with a calculator that i am making. i am using radio buttons as selectors for the operations (+-*/). i have two input-boxes. i want to do some error checking. for example if the user want to find the mod of a number, i want them to only use inputbox1 to enter the value. [Code] the problem is that when other radio buttons are clicked the effect doesn't change. how can i fix it so that other radio buttons don't have the same action. i am using visual studios 2008 professional.
View 3 Replies
Jul 11, 2011
I am trying to get my Visual Basic Web Browser to open links and buttons when clicked in a new window of my web browser by using the New Window event. I found this code to make links work in a new window of my browser, but buttons will not. When I click on a button, a new window of my form pop ups but the url says, "about:blank". Is it because the attribute is set to "href"?
Private Sub WebBrowser1_NewWindow2(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles WebBrowser1.NewWindow
Dim myElement As HtmlElement = WebBrowser1.Document.ActiveElement
Dim target As String = myElement.GetAttribute("href")
Dim newInstance As New Form1
newInstance.Show()
newInstance.WebBrowser1.Navigate(target)
e.Cancel = True
View 14 Replies
Jul 6, 2010
I have numerous buttons on a form, one each to select a playing card (52 buttons). When the Card(button) is selected I want to highlight it by changing the border from black to Red, then if reclicked from change back from red to black, easy enough (if then else). So that I do not have to copy this code 52 times I wanted to create a module as follows:
Sub ChangeButtonBorderColor(ByRef ButtonName)
If (Equals(ButtonName.BorderBrush, Brushes.Red)) Then
ButtonName.BorderBrush = Brushes.Black
[code]....
View 3 Replies
May 14, 2010
How to make a link button visible after another button has been clicked in asp.net(vb) in button_click()
it says error as "Object reference not set to an instance of an object."
i've done this in my code
Protected Sub InsertButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim receipt As LinkButton = FormView1.FindControl("LinkButton1")
' receipt.Enabled = "true"
[Code].....
View 2 Replies
Sep 5, 2009
I have already done the creation of button and the dragging of button at runtime already.But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button.so lets say i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them.the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
[code]...
View 1 Replies
May 6, 2009
Is it possible to add a button column to a datagridview and then remove a select group of these from rows without removing the rows themselves? That is, I want the ability to hide or remove these buttons in certain rows after certain actions have occured. I realized that I could simply delete the rows with these buttons, but I want to keep the data in these rows visible without the user thinking they have to use the buttons. I am assuming that I can also disable the buton in the desired rows as well.
View 2 Replies
Sep 1, 2010
I have 7 Windows forms.The order of the forms is defined within a configuration file.I want to place buttons on each form that will show the next available options.The Next button will move the next form in the list.The Back button will move to the previous form in the list. The Finish button will execute the final piece of code.The Cancel button will exit the application.If the user is on the first form, then there is no Back button.If the user is on the last form, then there is no Next button, but there is a Finish button.
Example 1:
Form1 - Next, Cancel
Form3 - Next, Back, Cancel[code]....
View 2 Replies
Apr 14, 2010
I'm writing a standalone application in VB.NET using Visual Studio 2005. I want to display/hide a bunch of Buttons based on the selected value of a ComboBox. Each selection would have a different set of Buttons to display, and I'd like to have them arranged in a nice grid.
Driving a TabControl with the ComboBox value would be the kind of behavior I want, but I don't want it to look like a TabControl to the user because it might be confusing.Is there a way to do this?
Basically, I'd like Selection1 of the ComboBox to show Buttons 1-4, Selection2 to show Buttons 5-11, Selection3 to show (maybe) Buttons 1, 3, 5, 6, and 8, etc., have them arranged nicely, and have the GUI show only the ComboBox and the buttons.
View 3 Replies
Nov 9, 2010
If my form does not have focus and I click on a menu item (think File, Edit, View) the sub-menu does not appear. All it does it return focus to the form. I have to first click to give the form focus and then click on the menu. Most other programs do not behave this way. Is there anything that can be done to change it.
View 2 Replies
Apr 13, 2010
How can i make it so when the user right clicks the listview column a different listview will show up instead of the orignal one
View 1 Replies
Mar 15, 2010
i have 4 different handles buttons with code how can i connect them in another "general button" that will make the 4 buttons to work with one click
View 3 Replies
