Hide Buttons In Select Rows With ButtonColumn In DataGridView?
May 6, 2009
Is it possible to add a button column to a datagridview and then remove a select group of these from rows without removing the rows themselves? That is, I want the ability to hide or remove these buttons in certain rows after certain actions have occured. I realized that I could simply delete the rows with these buttons, but I want to keep the data in these rows visible without the user thinking they have to use the buttons. I am assuming that I can also disable the buton in the desired rows as well.
View 2 Replies
ADVERTISEMENT
Mar 26, 2012
How to hide checked rows in a datagridview in vb.net. I want to show only the records which need to be checked or unchecked.
View 1 Replies
Oct 27, 2011
I searched for this topic and all the examples are in C# (and they have errors as they will not convert with a C# to VB converter). I am using VB.net 2005 and would like a sample that work for it. I have a loop that goes thru the DataGridView and changes the row color based on a column/cell value from the binded DataTable (shown below). I'd like to add to the loop (where the comment is) and also hide the button for this cell and let the "In Process" show in the cell instead.
Private Sub ColorInProcessItems()
' Color the rows green if they are In Process, red if they are Complete
For Each row As DataGridViewRow In dgvQueue.Rows
[code]....
View 3 Replies
Feb 2, 2012
I need a help with showing/hiding rows in datagridview by setting the trackbar value. The below example works if there are not too much rows. If there are greater number of rows then after you change a value of trackbar you must wait for a few seconds for the datagridview to redraw and only then you can use trackbar again.Apparently I must use multithreading to achieve what I want: when I use trackbar, datagridview starts to redraw, but if I use trackbar again before datagridview finishes redrawing, it immediately stops redrawing according to previous trackbar value and starts to redraw from the beginning according to current trackbar value. That way trackbar will never be frozzen (stuck, unusable...).I tried with backgroundworker but got error "Cross-thread operation not valid: Control '' accessed from a thread other than the thread it was created on." I have old and slow computer. If you have new and fast computer maybe you wont experience what I'm describing here so try to increase number of added rows in line 'For i As Integer = 1 To 5000' (I added 5000 rows here) - and if you have even older and slower computer than you will have to decrease this value or you will have to wait to long after you drag the thumb in trackbar.
View 5 Replies
Mar 1, 2012
How can I disable buttons on some rows in an unbound datagridview, or at least make it appear that it isn't enabled? The enabled property of the cell doesn't exist, and the visible property is read only.
View 2 Replies
Jan 14, 2011
how to get all rows in a datagridview values and pass it to new access database in vb format?
View 10 Replies
Apr 12, 2011
how would you select a row in a datagridview if the number of rows = 1
View 6 Replies
Jan 8, 2009
I'm using DGV to display data. I also have a DFVCheckboxColumn. If user checks a checkbox column the data from that row is transfered to database. i'm able to select multiple columns with pressing the CTRL key.But i wanna select multiple rows without pressing CTRL key. Can someone give me samplecode or guide me in this
View 1 Replies
Sep 8, 2009
i have datagridview with rows in it and one of the col show type of product. there are row with same type. on click of button i want to select all the row where productype = 1 (for example)
do i have to go thru each row in grid and check the condition for product type and then select it or there is another quick method.
View 2 Replies
Jul 1, 2011
I want the user only to be able to select rows and not individual cells in a VB.NET DataGridView. Is there a way to make this happen? I don't see an option for the DataGridView object to control this via properties.
View 2 Replies
Mar 11, 2010
I need to select multiple random rows in DatagridView with keypress.Ex:
Row1 -selected
Row2 -not selected
Row3 - selected
I do have part of code that will update certain field in database on keypress, but i have no idea how to create multiple selection and display it on DataGrid.CTRL+Click is nice, but I would like to have option of selecting rows with keypress.In following code I am checking if certain field is marked for selection(i want to give user an option to start selection, exit program then continue selection later) but it allways select all rows in table (even if only one is marked).
Dim NumRow As Integer
NumRow = 0
Do Until NumRow = dbtShow.RowCount - 1
[code]....
My question is: What is the best way to select multiple random rows in code?
View 3 Replies
Oct 29, 2009
I have added an unbound checkbox column to my DGV. I have two questions on handling it:
1. How to have a checkbox on this Column header, which on checking must check all the rows in the DGV and vice versa?
2. How do i get the Boolean value of the checked rows in DGV on event handling? In other words, how do i know what rows are selected?
View 3 Replies
Sep 13, 2011
I have two datagridview's both are databound. First one shows items for sale and the second stores all the items that were sold. I am trying too transfer selected rows from one to the other but no matter what I keep getting told "Rows cannot be programmatically added to the DataGridView's rows collection when the control is data-bound."
View 2 Replies
Jun 22, 2010
I'm trying to hide 5 to 12 buttons on a form until a screenshot is saved to the clipboard. I have it set right now so the user clicks a button(btnSavePDF) and then whichever buttons are visible are made not visible. But I haven't a clue how to restore just those buttons. I'm trying to avoid restoring them all unless they were all originally visible.
[Code]...
View 4 Replies
Sep 12, 2011
If i place 20 different buttons on my form, how can i hide them using the for each function or any other function instead of writing the following for each button[code].;..
View 1 Replies
Oct 13, 2011
Our site is developing against a 3rd party API (Wonderware) that returns datasets and datatables from certain calls. The issue we are having with some of the calls is the data returned is more than we want to show to the end users. We are binding the data to a datagrid, and will sometimes get back 20+ columns of data we don't need to show. Is there a way to filter the datatable of columns before binding it to the datagrid? Right now we are using the datagrid to hide the columns, but I think it would be better to strip out the columns of data we don't need before binding to the grid.
View 8 Replies
Feb 17, 2012
' PayList form
sSql = "SELECT FullName ,InvNomer, date,BalanceDue FROM Invoice"
With LvList
.Columns.Add("Name", 150)
[code]....
After I ADD To my Payment Datagridview Payment Form With InvNomer in DGV.Rows(i).Cells(1).Value
DGV.Columns.Add("FullName", "Name")
DGV.Columns.Add("InvNomer", "InvNomer")
DGV.Columns.Add("Date", "Date")
DGV.Columns.Add("BalanceDue", "Total")
Now hide my Paylist row with InvNomer where InvNomer in Payment.DGV.rows(i).cell(1).value I Have tried
Private Sub cmdPaylist_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdPaylist.Click
If pbNew Then
Dim AllItems As String = ""
[code]....
how to hide Listview rows ?
View 7 Replies
Jun 22, 2010
I made a form with only 1 Button. I want that when i click that button, 2 more buttons should be appeared. Example: Button1 is clicked. Button2 and Button3 are displayed. I have named Button1 as Scan. When i click on Scan, the Button2(Pause) and Button3(Stop) should be displayed. When it is scanning, i have placed the progress bar with the timer. When the progress bar finishes loading, Button2(Pause) and Button3(Stop) should be hidden again.
[Code]...
View 4 Replies
Jul 30, 2010
How would i delete only the successful inserted rows for insert and then move the non successful rows up and allow the user to correct the data and get it ready for an insert. If i dont delete the successful rows then i will have multiple inserts of the same dataRow and we dont want that! AND if i dont move the data up then it will have blank rows uptop and will end the try and not insert the corrected data. You can better see what logic i am trying to perform at the bottom of my code, right after I insert into the database. Here is my code.
Private Sub btnLaserGenerateTicket_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnLaserGenerateTicket.Click
'Function declarations
[code]....
View 1 Replies
Mar 9, 2011
I get an empty string when calling the .Text property. Refer below for snippet:[code]The internet search advises to use Items(col).Cells(2).FindControl(..), the problem with that is FindControl finds the control by ID, BoundColumn doesn't allow you to insert an ID for it.
View 1 Replies
Jul 30, 2010
How would i delete only the successful inserted rows for insert and then move the non successful rows up and allow the user to correct the data and get it ready for an insert. If i dont delete the successful rows then i will have multiple inserts of the same dataRow and we dont want that! :) AND if i dont move the data up then it will have blank rows uptop and will end the try and not insert the corrected data. Here is my code.
[Code]...
View 5 Replies
Feb 7, 2012
'Invoice Form
Dim daInvoice As New OleDbDataAdapter()
Dim dsInvoice As New DataSet()
Dim MyDataTable As DataTable
[code]...
Error...
Rows cannot be programmatically added to the DataGridView's rows collection when the control is data-bound.
View 5 Replies
Sep 2, 2010
how to add Rows programmatically to the DataGridView's rows collection when the control is data-bound? here is my code but i got error as "Rows cannot be programmatically added to the DataGridView's rows collection when the control is data-bound? "
[Code]...
View 7 Replies
Apr 14, 2010
I'm writing a standalone application in VB.NET using Visual Studio 2005. I want to display/hide a bunch of Buttons based on the selected value of a ComboBox. Each selection would have a different set of Buttons to display, and I'd like to have them arranged in a nice grid.
Driving a TabControl with the ComboBox value would be the kind of behavior I want, but I don't want it to look like a TabControl to the user because it might be confusing.Is there a way to do this?
Basically, I'd like Selection1 of the ComboBox to show Buttons 1-4, Selection2 to show Buttons 5-11, Selection3 to show (maybe) Buttons 1, 3, 5, 6, and 8, etc., have them arranged nicely, and have the GUI show only the ComboBox and the buttons.
View 3 Replies
Nov 8, 2010
I am working on Datagridview control.When Click on a Button in the ButtonColumn then few rows in the datagridview should be unhide or Hide. i.e. For one click Rows are Hide.For Second click Rows are Unhide.Assume the below table contains my present Datagirdview table.
ButtonClick Category A B C D E
Button 3101 - - - - -
Button 3102 - - - - -
[code]....
If i click 3101 Button then the corresponding "31" rows should be display.If again click same Button the corresponding "31" rows should be Hide.
View 3 Replies
Jul 21, 2010
How to hide or show rows in a table layout panel.
As I used rowstyle property and it works
But the issues are
1) It works very slow
2) It seems as form is vibrating and lightning behind the panel when rows are hiding or showing(jerky motion of hiding or showing)
I also used the control .visible property for each control of the row but it also make same problem of being slow
View 8 Replies
Feb 20, 2009
I want to place two radio buttons in so I can select one of them to use one formula, and then select the other to use another formula. I want to use the I=P(1+r)^n formula and I=P(1-r)^n formula with the radio button text showing Appreciation and Depreciation.
Heres my copy of the original code.
Public Class Form1
Private Sub cmdExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdExit.Click
End
End Sub
[CODE].......................
View 5 Replies
Sep 1, 2011
Can anyone tell me why "Rows cannot be programmatically added to the DataGridView's rows collection when the control is data-bound." I keep getting an error "Invalid Operation Exception was Unhandled" error. All I am attempting to do is allow the user to select products from a list(or a second datagridview) and have it added to the datagridview so they do not have to type in every cell since the other cells are not visible because they do not purtain to their needs. Plus they will be able to save all items at the same time.
[Code]...
View 2 Replies
Apr 26, 2012
It was even difficult coming up with a Question title for this.
Am not sure whether am using the right approach to my problem. See i have this datagridview that contains rows that i would like have saved back into the Database as new rows but with a column altered to a new value.
Eg
PKColumn1 FKColumn2
Column3 Column4
1 1
[Code].....
What am looking at is Change FKColumn2 (some foreign key, maybe i can also have a combo box somewhere on the form and an "import to") values to something like 2 and save the rows back to the database without loosing the original rows.
View 2 Replies
Mar 15, 2011
Ive written a code to calculate wholesaler and retailer. i dont know why the program is giving the same results. help?
'Created By: Amehd Gutierrez, 4cs230
'Project Name: Johnson Products Calculator
'Project Purpose: Calculates and displays the total price of ann order, based on the number of units ordered and the customer's status.
[code]....
View 2 Replies
