it's about a program mode, i want to hide all except one tabpages if i check the "standard"-radio button.
When i check "advanced" the tabpages should be visible again.
"standard" is radiobutton1, "advanced" is radiobutton 2
I've tried hiding one tabpage in the form and it was somehow successful. However, it was not the one i'm planning to do with my program. I don't know if there exists any code that could make the tabpages(two actually) automatically hide when the form loads and would only be visible after some passing some conditions.
View 1 RepliesI am trying to show or hide tabpages as per user choice. If user selects gender male then form for male in a tabpage "male" should be displayed and if user selects female then similar next form should be displayed in next tab "female" I tried using
tabControl1.TabPages.Remove(...) and
tabControl1.TabPages.Add(...)
It adds and removes the tabpages but doing so will loose my controls on tabpages too... i can't see them back.
1) My program has 3 groupboxes each consisting 3 radiobuttons. Based on what is checked in the first box, and then what the user chooses in the second box, I either need to hide the 3 box and choose one option, or keep it showing for the user to select an option. The hiding is because based on the previous choices, there is only one option for the user in the 3rd box, and so I don't want to confuse the user nor waste their time. So I when the user selects radiobutton1, I need to hide groupbox3 and select radiobutton2.This is what I have previously attempted and it didn't work.
[code]...
How can I select the radiobutton using code like shown above?2) My second question is regarding scanning strings. I have 2 output strings. They either print a device or a message saying why the user doesn't get an output. At the end of the code, I need to scan through the strings until I get to a space and then store that as a string. How does one go about doing this?
Is there a way to hide the tab header of a tabpage or change the apperance to look like a menustrip? I'm wanting to use a menustrip to switch between the tabpages so there is no need for the header.
View 3 RepliesHandling multiple radiobuttons, only one should be selected in group
View 2 RepliesIm trying to use a CheckboxList Control to Store Yes and No and i noted there its a property on the control
"Selection Mode" One/MultiSelect/MultiSelect Extended
i set One expecting it to allow only one item being select at the same time but it doesnt work as expected, my question is there its another property to achieve this without having to code the event?.
i could do it by coding the event but, im tired of coding stuff that really isnt needed, since there are routines for that on VB.NET.
I want to group RadioButtons, but I don't want to use the visible control GroupBox. Is there something like the Java ButtonGroup in VB.NET?
View 3 RepliesI have yet another question. I have set up a series of radioButtons to create a menu of choice for a class project and am trying to set it up so that there would hypothetically be a discount on a purchase of two or more t-shirts, I have the coding set up so that if any one item is checked and the calculate button is clicked, then the dollar value or "total" will show up, however I am not able to set up a total for more that one item, it clears the previous "total" and sets up a new total for the most recent t-shirt value checked.
[Code]...
How do I get all the radiobuttons to be unchecked when program is run? Right now there is always one button that is checked. Using VB2008. [URL]
View 9 RepliesMy assignment is to get the Get Monthly Income (Num1)Get Monthly Home Rent/Mortgage (Num2) Get Other Monthly Payments (alimony, child support, student loans) (Num3) Display Allowable Monthly Car Payment Display Maximum Car Value (interest rate based on credit) (answer) Public Class Form1
[Code]...
I have a panel on my GUI with radio buttons. When I run the code to determine which is the checked radio button from that panel, the code runs fine, but the panel disappears from the GUI after that. Here is the code I have to determine the checked radio button:
Dim rbName = (From r As RadioButton In Panel1.Controls.OfType(Of RadioButton)() Where r.Checked Select r.Name)
System.Console.WriteLine(rbName.First)
I have tried using:
Panel1.Visible = True
and also
Panel1.Show()
Panel1.Refresh()
but it doesn't show the panel again. I tried the same thing for individual radio buttons such as RadioButton1.Visible = True and it doesn't work.
I'm making a questback in Windows forms (VB). I've succesfully setup the MySQL-database, and made connection with everything needed. I've also manage to populate a DataTable called tblAlt for the alternatives for the question.Then I try to populate each radiobutton with rows from the DataTable.Here's what I tried:
For Each row In tblAlt.Rows
If tblAlt.Rows.IndexOf(row) = 0 Thenof the table).
[code]....
How do you pass one radiobutton from form 2 to form 3? Iv tried:
Private Sub Form3_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Form2.rbtnPatterned.Checked = True Then
rbtnPatterned.Show()
End If
But that doesn't work. The radiobutton selected in form 1 doesn't appear in form 2....
Is it possible to use CheckBoxes to act as RadioButtons for Yes or No options?
View 6 RepliesIs there any way to use RadioButtons without any GroupBox or Panel or anything else?
View 39 RepliesI'm making a basic game in Visual Basic, and I have a form called "Level1". In Level1, you press a button, and it pops up a dialog (I made the dialog, which is just called "Dialog"). The dialog has an empty label because once you press a button in Level1, in the click event, the label text is set, along with the RadioButton text. The Label is a question such as "What is 10 x 10?" and the RadioButtons display possible answers. Below the RadioButtons, is a Submit button that the user clicks once a RadioButton is selected. The thing is, I only have one dialog box because the game has 5 levels and 9 buttons per level, so I don't want to make 45 separate dialog boxes. Is there a way I can make the Submit button click event in the click event of the first button in Level1?
Private Sub q1Btn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles q1Btn.Click
Reset() 'Setting text for label and radiobuttons to ""
'Setting text for label and radiobuttons
[code]....
I wanted to have one choice enabled to the user(radio box) in two Groupboxes, is that possible? Is looping the why i should do it?
Public Class Form1
Inherits System.Windows.Forms.Form
Dim version As String
[code]....
I'm curious if it is possible to hide a group of text boxes from view in a form until a particular condition is met, and to have a custom set of text boxes for that condition. To give an example; I want radio buttons offering choices for a manner of searching records, the user selects one and then a specific set of text boxes are displayed for the user to utilize, if a different option is chosen a different set of text boxes will be shown. Is this something that can be done?
View 7 RepliesI have developed a simple form with some checkboxes, textboxes, radiobuttons, and textboxes inside a groupbox. Initially I had all of this inside 3 tabs. I created a button to clear all selections so user can restart the process of selection if so choses. It does not work (see below). I thought it is the tabs - so I went on and removed them (by coping the groupbox - deleting the tabs and then pasting the groubox into the main form). The code still does not work. Is there a setting that I must change or something else because a created a simple form with a couple of groupboxes that had all the above mentioned and it works just fine - all of them clear. Just in my form it does not work
View 6 RepliesI need to display a listbox, but i want to select only one item using radiobuttons. I was looking for info about checkedlistbox, and found some routines that deleselect one item if i check another, but i think is wrong the use of checkboxes (designed to multiple selections) to select one value. Radiobuttons are more suitable for this task, but i dont know how to put the radiobuttons inside a listbox (items are variable, i retrieve that list of items from a database, and populate in run-time).
View 3 RepliesHow can I retrieve data from a DB in Access to labels, or radiobuttons in VB.NET?
I've search and to retrieve data people usually show Datagrids.
I just need to know how to navigate in records, by the number of their position (?) and to place that data in labels/textbox or anything like that.
This is what I have by now, just the conection to the DB (sorry is in spanish)
[code]...
I am trying to put together a simple form with prices assigned to Radio buttons and check boxes.
I started by creating a simple form with four Windows Form control, two check boxes and two radio buttons, there is also a NumberUpDown Control for quantity but I have not added that yet.
Basically the user make selections, the price is calculated with total and subtotal and displayed on a label.
I am trying to start as basic as possible then work my way up to more complex calculations as I progress.
Here is my Screw up version: :)
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
Guys I'm trying to dynamically create panels which are filled with seven radio buttons each. I get the panels but they are only filled with 1 radio button each. What am I doing wrong here? QuestionQuantity is an Integer and is the variable that determines how many panels I will be creating. The code is in the form load function located.
[Code]....
I have a WinForms dialog box that contains 3 radio buttons. I am using ApplicationSettings to bind the Checked property of each of these RadioButton controls, but it doesn't do what I am expecting it to do. Now I have to click each radio button twice before it gets checked and the selected radio button is not being persisted.Is there a line of code I need to execute when the form is closed that saves the user settings?How do I eliminate the need for 2x clicking on the radio buttons?Is there a better way to persist this type of user setting? I do have a public property on the dialog box class that gets/sets an enum value based on which radio button is checked, but I didn't see an easy way of binding that property to a user setting. Should have specified that I'm using vb.net. I think that means My.Settings instead of Properties.Settings.
View 4 RepliesI have created an application that has a webbrowser, two radioButtons, button1, and a menustrip.The menustrip has two main heading and under each heading are about 15 Tool Strip MenuItem. The ToolStripMenuItem properties are set to CheckonClick and an example of forum1. vb code for this section of the application is:[code]What I need is for the user to be able to add his/her own ToolStripMenueItems to those already present, along with the base url.So that clicking Button1 sends them to the base url And also have the Radio Buttons automatically add the extensions to the base url when the RadioButton is clicked.They need to be able to do this from the application itself.But I'm not sure how to code this in.They will not have VB to make modifications.
View 1 RepliesI have three radiobuttons in a groupbox. When they are not bound to application settings, they behave normally.After binding each of their checked properties to application settings, the following happens: I have to click an uncheckedradiobutton two times to have it checked. After the first click, all three are unchecked.
View 2 Replieshow to hide exe into task-manager in windows 7 using vb.net windows application?I want exe is hide into task-manager in windows 7 & windows vista machine using vb.net(windows application)
View 3 RepliesI have an I/O device with 8 channels. I want to create a timer control for each channel with combo boxes for days, hours, minutes and radiobuttons for AM or PM. This is a crude (and not working) example of what I need:[code]
View 1 RepliesMy UI currently addsabPageGraphs to a TabControlMain dynamically. I now need to present 4 different views of the same data. I want to do something like the following code indicatesbut there is no 'Add()' method for TabPages by which I can add 4 Tabs to an existing TabPage.How would I accomplish this so that under a specific dynamically added TabPage, the User can select any of 4 new TabPages with a different graph to view.
if (!this.tabControlMain.Contains(this.tabPageGraphs))
{
this.tabControlMain.TabPages.Add(this.tabPageGraphs);
[code]....