How To Save File From My Resources Using SaveFile DialogBox

Jun 11, 2012

They are numerous examples of using SaveFileDialog mainly on simple textboxes. However, I have in my resources an Excel SpreadSheet. I want to allow the use to select the destination where he can save this spreadsheet. He is not allowed to change the name of the file in the filename. Afterwards, I want to copy the file from my resources and save it to the user's selected destination. How can I do that?

View 1 Replies


ADVERTISEMENT

DialogBox - Enable User To Choose Folder Name And Save It

Jan 28, 2010

I want to have a dialog box like SaveFileDialog that will enable the user to choose a folder name and the save it. How I can achieve this?

View 5 Replies

Save File To Resources?

Jun 11, 2011

How would I save a file to the application resources? Like I would be able to save text files using the GUI and then when I re-open the application I'd be able to access them again.

View 1 Replies

Save File In Resources To Local?

Jan 11, 2011

I have a file in my resources in visual basic 2010, when the user clicks a button i want the file to be saved on the c drive.How can i do this?the file is not a txt file.

View 4 Replies

VS 2010 : Save A File To Resources?

Aug 25, 2010

How would you add an exe file to the resources of an application. I want to add an exe to the resources so I can run that application on another machine and then be able to take the file from resources and put it on that computer.

View 2 Replies

Opening A File Without Using Any Dialogbox - Directly?

Aug 15, 2011

is there any code for opening a file without using any dialogbox? directly

View 4 Replies

RTB SaveFile With Append?

May 9, 2011

As far as I can tell, if i want to append data to a RTF from a RTB, the only way is to load the RTF into a RTB, add the next text to the RTB, and then SaveFile the RTB which overwrites the original RTF.

View 7 Replies

OpenFile And SaveFile Pseudocode-NO CODING Required?

Apr 2, 2010

Specification:A library application maintains a list of all the DVDs, this list is populated from an input text file which is also saved as an output textfile.The filename used is myDVD.txtNeed to write code for a Method SaveDVDFile() - the condition the method should fulfil is - that if the filename is a valid path for the text file , this text file is saved such that each line in the text file has an entry for 1 movie name. Is my pseudo code correct?

aFileName as String
aWriter As StreamWriter
set FileName To

[code]......

View 1 Replies

Save Icon From Resources

Oct 11, 2009

Im having some problems when trying to save an icon from resources.Im using the following: My.Resources.setup3.Save(Application.StartupPath + "\temp.ico") But that generates the following error: QuoteValue of type 'String' cannot be converted to 'System.IO.Stream'.

View 6 Replies

Way To Save Window Resources

Mar 16, 2012

In my application I'm creating a style like this[code]...

And I would like to save this style when the application exits so that when the application runs next time it would load my new style.

View 1 Replies

How To Reference Resources To Save In Settings - Visual Basic 2008 .net

May 24, 2012

I'm trying to save a setting that keeps what background image I'm currently using.If it's an external file, there is no problem, i can just get the .location and set it in a String setting to store it.

But, if I want to store an image resource as a setting, how do i do it?I know i can store rawdata, like bitmap information, but then i can't set that type of data to the my.background.

I don't know if the question should be: "how do i reference resources", but the my.resources.resource.methodsList doesnt contain anything that seems to be of use.

View 1 Replies

VS 2008 Background Images - Save The Picture To My.settings Or My.resources

Aug 25, 2010

I'm making a program and in which the user can select a background image from their computer, but I have not found a way to save the picture to my.settings or my.resources

View 3 Replies

Getting Code To Run When Returning From Dialogbox

Feb 27, 2009

i got two forms

form1 (frmUserDetails)
form2 (frmSearchForm)

when i click the search button in form1, form2 appears.

i get the information i want from form 2 and store it in a variable.

when i close form2 and form1 is active again i want this code to run automatically:

[Code]...

View 2 Replies

Make A Download To Dialogbox?

Jun 14, 2011

I have a file that can be saved to a portable device. I would like to know how I could create a DialogBox to select a portable device to save my file to. This is very similar to a save, as DialogBox except the file already exists.Perhaps better said, I need to be able to download to a DialogBox.

View 2 Replies

Adding Custom Colors In DialogBox

Jan 13, 2012

VB 2010, Trying add custom colors to a dialog box, save and reload on opening. The "add custom color button" just adds it to the boxes on the left and does not save it for future use. If the user select that color having added it the left you can then get the integer value and add it to the code

ColorDialog1.CustomColors =
New
Integer
() {CustCol1, 16646145, 16580610, 16645891, 16711426, 65536, 6699546}
And save for displaying next time. but it does not return the same color.

Why does it return a different color, it displays the correct color when used at the time of saving? Is there no way of saving all the custom colors, if a user puts several in the boxes on the left? You have to make sure you select Basic color first otherwise it changes existing custom color or if you select a blank box you cannot select anything.

When custom colors are added via code as above it goes along the top row first but when you click the "Add custom color button" it adds the first color to first position of the top row and the next to the first position of the bottom row. How to add custom colors to a dialog box, save and reload on opening.

View 5 Replies

Forms :: Getting Code To Run When Returning From Dialogbox Automatically?

Feb 27, 2009

i got two forms

form1 (frmUserDetails)
form2 (frmSearchForm)

when i click the search button in form1, form2 appears.i get the information i want from form 2 and store it in a variable.when i close form2 and form1 is active again i want this code to run automatically:

Me.userIDsearch = frmUserSearch.NuNameTB
Try
'TODO: This line of code loads data into the 'SoftwareLookupDataSet.tbl_software' table. You can move, or remove it, as needed.
Me.Tbl_softwareTableAdapter.Fill(Me.SoftwareLookupDataSet.tbl_software)

[code]....

how would i get the above code to run when the focus is back on form1?

View 8 Replies

Making/Using A Custom Messagebox/dialogbox Control

Mar 12, 2009

I am trying to create a Messagebox/dialogbox that will allow me you Define the Prompt and the text for the two buttons. I started by looking around the internet and found [URL]. It got me started But i don't think i have the libraries to make the stackoverflow.com code work. i don't know enought about events to make the box always have the focus untill it is closed or one of the buttons is pressed. I would also like to return the button.text of the button that was clicked.here is the little code i have

Public Class DialogBoxForm
Private _ButtonName1 As String
Private _ButtonName2 As String

[Code].....

View 3 Replies

Updating Control On Another Form With Results Of DialogBox

Feb 29, 2012

I made a windows form which contains a listbox (named VenueList). The listbox is pulling it's values from a list provided by a binding source VenuesBindingSource which is pulling in a ID for the value and a name for the text. There is a button which is causing a DialogBox to appear which is asking for values to store in the database for a NEW venue. Once the values are filled and insert the database, what's supposed to happen is that the dialog box closes and goes back to the original form which invoked it.

However, instead of updating the list. The list stays the same. But if you close the form and reopen it, you see that a new value was added.
TournamentSettings.VenuesTableAdapter.InsertVenueQuery(Trim(VenueNameTxt.Text), Trim(VenueAddress1Txt.Text), Trim(VenueAddress2Txt.Text), Trim(VenueCityTxt.Text), Trim(VenueProvinceTxt.Text), Trim(VenueZipTxt.Text), Trim(CountryBox.SelectedValue), Trim(VenuePhoneNo.Text), VenueType.SelectedText, VenueWebAddress)
TournamentSettings.VenuesTableAdapter.Fill(TournamentSettings.VenueNameList.Venues)

In the above code, InsertVenueQuery is the name of a query from the designer which is invoked to add the values onto the tableadapter VenuesTableAdapter which is used to fill the combo box on load. I also sent the Fill command to refill the table with the new value. So the question is, should I go about doing this another way, rather than feeding the Table adapter and sending a fill command on to the datatable? Or is there something that I'm not doing here which I should to force that value into the list. I'm tempted to redo everything outside of the designer but that's a lot of code since I have to essentially run two commands (one to insert the data, and another to get the @@IDENTITY value since this is run on an access database.)

View 1 Replies

Dialogbox - Suppress A Call To A Dll To Open Warning Dialog Box

Mar 28, 2012

I am calling a function in an external dll to a device that runs some firmware. When I call device_open(), the device driver brings up a Warning dialog box that says there is a newer version of the firmware available. How do I suppress the warning dialog box? I am calling this function during an overnight test, so the dialog box prevents my tests from finishing.

View 1 Replies

File I/O And Registry :: Save File Dialog - Allow Users To Choose The Directory To Save Files Into

May 8, 2010

I am trying to find a way to allow my users to choose the directory to save files into, THe file name is automatically generated as it has a naming convention and i am able to pre program a location to save to but i d like to be able to allow my users to decide themselves which directory they want to save the files to and to have the ability to choose which directory to save to

[Code]...

View 2 Replies

Use Save File Dialog To Save File But When Open Save File?

Dec 23, 2011

i have made a downloader . i use save file dialog to save file but when open save file dialog it does not get the file name and file extension from the source....please help me to make a file downloader which gets the file name and extension automatically from web. my downloader downloads file succesfully but doesn't show its real extension and file loses its default extension.

View 1 Replies

Save As A File - Show The File Name In One Text Box And File Path In Another After Save?

Apr 19, 2009

here's my nut for the day.. i want to save a file to a folder. here is the code i have:

[Code]...

View 1 Replies

File Path, As A String, Of A File In The Application's Resources?

Sep 15, 2011

The reason I ask is that I want to print, at run-time, a file in the application's resources, like this:

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim printProcess As New Process
printProcess.StartInfo.FileName = "C:UsersGeoffrey van WykDocumentsCountdown_Timer_Help.rtf"
' printProcess.StartInfo.FileName = My.Resources.Countdown_Timer_Help
printProcess.StartInfo.Verb = "Print"
printProcess.Start()
End Sub

View 5 Replies

Move File From File System To Application Resources

Oct 21, 2009

I want to know if it's possible to move a file from the file system into my applications resources.And if so, how?

View 6 Replies

What Is The File Path As A String Of A File In The Application's Resources

Jan 23, 2010

The reason I ask is that I want to print, at run-time, a file in the application's resources, like this:

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim printProcess As New Process
printProcess.StartInfo.CreateNoWindow = True

[code]....

When I use "C:UsersGeoffrey van WykDocumentsCountdown_Timer_Help.rtf" as the argument of FileName, it works. But when I use My.Resources.Countdown_Timer_Help, it says it cannot find the file.

View 2 Replies

Unable To Debug Project - Warning    1    Could Not Find Type 'WindowsApplication1.My.Resources.Resources, Time Table'?

Feb 28, 2009

i'm unable to debug my project that i made. i save it and everything, but it just won't playit says Warning 1 Could not find type 'WindowsApplication1.My.Resources.Resources, Time table'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built. C:SchoolIPTTime table, using 2 loopsTime table, using 2 loopsForm1.Designer.vb 123 0 now when i open it up and try to debug it , it comes up with an error, i even try referencing it but it does nothing ,

View 2 Replies

Create A Save File Without Opening A Save File Dialogue?

Sep 19, 2009

im trying to create a text file with some details that ive put into some text boxes.I got on screen

3 textboxes

2 buttons (which i would like to get their text from)and then 1 button to save details and exit.I got the coding place but i dont want a a dialogue box to come up i just want to save the stuf to a set folder location, will need to read the textfile to the same area, incase the user wants to change the data. Struggling to understand the my stream section in my books.

Dim saveFileDialog1 As New SaveFileDialog()
saveFileDialog1.Filter =
"txt files (*.txt)|*.txt|All files (*.*)|*.*"[code]......

View 13 Replies

Save/export The Object File To .WAV File With Save Button?

Dec 22, 2011

i am coding a sound recorder with VB2010, how to save/export the object file to .WAV file with save button?

Public Class SoundRecorder
Dim soundrecord As Object
Private Declare Function mciSendString Lib "winmm.dll" Alias "mciSendStringA"

[Code].....

View 14 Replies

Add A File From Resources To Temp File Location?

May 12, 2009

ok im tryin to run an embedded .exe in my app but i seem to be having a issue with my code can someone have a look

Private Sub ButtonX1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ButtonX1.Click
Dim size As Long = My.Resources.Myprogram.Length - 1

[Code]....

my error is ' Read ' is not a member of 'system Array'. i have change the program name to Myprogram i have added myprogram.exe and then the 'exe' is not a member of 'system array'

View 6 Replies

ADD File To My.Resources?

Apr 10, 2010

dose any one know how to add a file say file = C:mypicpic.jpg to my.Resources at run time sometime like my.Resources.add(file)

View 11 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved