I have a form with a couple of multi-line text boxes, a couple of radio buttons, and a couple of check boxes. When the form is closed I need to save the values of the textboxes, radiobuttons and checkboxes so their values will be retained next time the form is open. I've done this in VB6 on form open and form close, but I cannot get the same module to work in .NET
Here was what I used in 6.0 to save:
Sub SaveFormState(ByVal SourceForm As Form)
Dim A As Long ' general purpose
Dim B As Long
Dim C As Long
Dim FileName As String ' where to save to
[Code] .....
I have multiple controls on my form. Text boxes, radio buttons, check boxes, etc. Is there a way to move through every control on the form and save it's value, status ? Like whether the radio button is checked, or not. The value of the text box, and save them all to a text file. Then, reload the values saved in the text file in the same sequence. Without doing all this one line at a time.
I am looking for a way to save and load the values of all my controls present in my form.My form has around 100 controls spread over 7 tabs. The controls include (Multiline) TextBoxes (Strings), NumericUpDowns (Integers, Decimals) and Checkboxes (Booleans). If the user clicks the save button a "Save File" dialog should appear allowing the user to specify the directory and the filename of the save file.All the values of the controls should then be written to that file.If the user clicks the load button an "Open File" should appear where the user can pick a previously saved save file. All the controls should then adopt the values found in the save file.I have implemented Application Settings in my form, and now when I click save, it saves the control values through My.Settings.Save(). If I click load it loads them.However, my project requires that multiple save files can be made to reflect multiple configurations. As I understand Application Settings only allow for a single .config file in the Application Data folder.So how can I code a save/load routine to save/load different configurations?
How Do I Save Listbox Values When Form Is Closing? and how do I load saved listbox values when my form opens again? Listboxes just don't seem to want to save. I suggest trying it out before posting unless you know the answer because simply using property binding in the applications settings doesn't want to work.
1. how to save the multi same form values with vb.net & access?
2. One of the combobox - room names (computer center, first meeting room, second meeting room, etc) on this multi same form, but it is limited from the admin, actually,the admin will assign the room to the manager to set the room. (I will do this room names combobox from the other table binding.) My question for this, is possible to have multi same form, but with different combobox values for each manager?
Basically I have a form which is used for a report, when completed it is then mailed to various mailboxes. I would like the option that if the user cannot complete the form, they can save it & reload the values into the form to use later.Some of the boxes will have quite a lot of text, so using the registry is not an option. I have looked at My.Settings but think this is for application settings not user input such as a lot of text - but I could be wrong.I've looked at freefile & got it to work with text boxes saving to a .dat file, but had a problem in that text appeared in the wrong text boxes so I assume the order was different in the load to what it was in the save?
I have a form which has a user control in it added dynamically. How can I change the values in that dynamically generated user control? All my functions are in a module and I will just call them in main form. So in module how can I find that user control and change its values? I tried writing a function in user control form. Like it has 10 txt box and I tried to pass a structure as argument in that user control form but I am unable to do so. when I tried to declare the structure outside function parameter in user control form it works well but not as function parameter..
I been have some research to this forum about the layout setting save & load...one of the method I found is store it to XML...but it only allow to store textbox value, other like textbox location, size is not work.... it can store every control like textbox, button, label, listview and etc in my form include size and layout and allow to load it?
i want my form to save to the database every time a control lose focus. can i make it global or do i have to code it for each and every control i have?
Private Sub TextBox10_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox10.LostFocus Me.Validate()
lets say I have a form (form1) with lables a-z which are all designed with default text "0". So they all show 0 on program startup. which is fine. I also have a dialog with 2 TextBoxes; I want my program to update the default text/value on (only)form1 labels x, y and z to whatever was put into the textboxes when i press the OK button on the Dialog, so these specified labels show the 'new' value on next startup. Is it even possible or should I save the values to a file which loads the values in the specified labels on startup?
I have to save the text boxe values of a form to a text file almost like a data record. I will be saving an Employee First Name, Last Name, Dept Number, and Phone Number. This I know how to do using streamwriter.
next form which we have to use stream reader to load one record at a time. The form has a next button to load the next record. How do I seperate each record (I am sorry for calling it a record if this is inappropriate) when use streamreader and how do I load a record at a time.
I know how to open a file and use streamreader, I just don't know how to read one record at a time and move to the next one.
I hoping to find a current and simple way to do this. I'm using VWD Express 2008 and SQL Express 2008.I'm able to get the client's path to the image file using an asp:FileUpload control on the web form.
How do I upload the client's image file and display it in the web form's image control?How do I save it to the sqlserver? The image table is already set up with a "Image" data type column. Can the image be saved to the database as simply as other data types?
find a current and simple way to do this. I'm using VWD Express 2008 and SQL Express 2008.I'm able to get the client's path to the image file using an asp:FileUpload control on the web form.How do I upload the client's image file and display it in the web form's image control?How do I save it to the sqlserver? The image table is already set up with a "Image" data type column. Can the image be saved to the database as simply as other data types?
I need to save the form settings, like a save state of the form. Because the program allows the user to add controls. I would like to be able to save them and load them. BTW: The controls are Panels and Labels. BUT! The Panels are a modified version of the control, known as NewComp. This simply allows the user to drag the panel around the form.
I'm a "Moderate" skill programmer, and am upgrading some software I've written in VB.Net (VS2008, .Net 3.5), and need to be able to accomplish the following, which I'm not sure of the best way to go about doing: The software is an information reporting dashboard for a call centre. I have a csv file being created about every 10 seconds, extracted from the telephone software, the file consists of a list of "Skills" (basically telephone line types), the number of calls received on those lines, and the number of callers who hung up (and a few other bits of information I need, but once I figure the basics out, the rest should be easy), basically looking like the following:
[code]...
I need to be able to read this csv, store the data, filter out the "Skills" to be report on (i.e. 1,2, and 5 only), add up the "Offered" and "abandoned" data associated with them and then display this information as one number (i.e. "Skills 1,2,5 - Offered: 4925, Abandoned: 13") (and then the same for the other "Skills"). This data could grow as more phone lines are added or some are taken away.I've got the code to read the data into an array working, but I've got stuck with how to filter and add up the data. I'm not even sure if I can do this with an array.
I have two radio buttons and several text boxes that need to be filled out.I need to be able to save the textbox values and the checked radio buttons when my Save All button is clicked. I also have to be able to open the saved file in the program and have all the saved values be displayed in the correct textboxes when I click the open button and search for the file. I am new to programming so I have no idea where to start this function...
Server Name, Username, Password - textbox SQL Authentication, windows Authentication - checkbox
I have Database Form, First Time i run my software, I have to give Server Name, Window or SQL Authentication mode, UserName and password. Next Time I run the software, given data's like Server name, username, password, window or sql authentication should appear in the form. Before I used VB6, I used the ini file for getting the username, password and servername.
vb6 code. Dim File As String, OFLen As Double, str As String File = App.Path & "SQLServer.ini"[code]....
There is any option is available in the vb.net for saving the data's or i have to use the same format(ini file) in vb.net
i have no time for design a database and all these things ,i have only one table and i have to fill the answers , i have to finish it within two days.the problem is I have more than 50 questions and i divided them into 3 groups , i putted each question group in User Control, and i am trying to save the values from each user control.
I've bound a lot of controls on a form to a Entity. Some of them update fine, the others are just jumping back to their original value as soon as it loses focus.The old data are loaded in all controls perfectly.
Dim Q = From e In EnData.Calls Where e.CallID = ID TempRow = Q.FirstOrDefault() ticTemp1.DataBindings.Add("Value", TempRow, "CallDate") ticTemp2.DataBindings.Add("Value", TempRow, "CustomerID")
im trying to figure out how to edit this program and have it save values as a string or array and allow them to be recalled and edited however im at a terrible slup, here is the code im going to base it off of.
Public Class frmHospitalCharges Dim introomcharge As Integer Dim decmisccharge As Decimal
[Code].....
i have the basic program written i have to add a input box for names.
I mean, I want my program to take screenshots and i want it to count the number of pictures forever. Just like any Digital Still camera you know? Even when you format it, if you've took 2000 pics, the name of the first pic you take after formatting it "DSC2001"
I have a combobox which contains few objects in Items. When the user selects any item from the combobox the values from the Object member variables are stored in the textboxes on the form.The user will change the values in the textbox and then he will select another item from the combobox.
I use this code to save some TextBox values to XML, but when I try to save some more, it overwrite the first one. What am I supposed to do in order to save more contacts?
Imports System Imports System.Xml Private Sub ProsthikiBTN3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ProsthikiBTN3.Click Dim settings As New XmlWriterSettings() settings.Indent = True [Code] ......
I created a vb program so anyone in my company can open it and see who is using what phone number offsite, and since different people go to different places each day, i linked the name and place fields to their respective database.
I've been literally googling for an hour now trying to find how to save variable settings to a file.I'm writing an application and I'm using alot of changeable variables. I want to be able to save these to a file so they can be loaded at application startup. I don't feel like using the regestry since I hate to write unimportant things to the registry.I remembered that I found a good example with simple code of how to do this with xml, but I can't seem to find the example now.
