I have a VB2008 with SQL2005 MDI application with multible forms, and Form1 has serveral Textboxes, and Textbox1 is binded with SQL database Table1 Column ID, what I want to do is when try to save data if ID xxx aready exist then it spit out a message (ID already exist.)
View 12 Replies
I want a Code to check Database exist in SQL and Message Box Show Database Exist Yes/NO?
View 1 RepliesI want a message box to show when a username doesn't exist. I figured this would work but an error shows saying 'FileNotFoundException was Unhandled', for the fist line.
Dim UserFile As New System.IO.StreamReader(sPath & "" & UsernameBox.Text & ".txt")
Username = UserFile.ReadLine
Password = UserFile.ReadLine
[Code].....
how to Check Exist Database in SQL And Message box Show Answer?
View 4 Repliesim trying to generate an error message to the user to let them know a file doesnt exist.So far ive got the user to enter the file name into a textbox, they click search and if successful will load a new form with a PDF file reader built in( AxAcroPDF1 )everytime i enter the right file name i get the file loaded, if enter the wrong name the File page still loads with no pdf and no message saying file doesnt exist.
Private
Sub PictureBox1_Click(ByVal
sender As System.Object,
ByVal e
[code]....
I'd like to create a data bound comboboxcolumn off of the distinct results of a view in my database. The view returns tablenames within the database which do not already have an entry configured. I use this as a entry to tell a purge application how and what tables to purge.Setting up this combobox proves to be a little more difficult than I imagined because my view pulls from informationschema.columns in the master db and therefore is unrelated in the 1:M traditional scenario. So as a result my displaymember and valuemember get the same field unlike most examples I see where some integer or enum is the backing value in the valuemember. Not the case here.
When I put all this together and run the code I do have choices in my drop down list but the current cell is blank. What is going on here?..create column
Dim Tablenamecolumn As DataGridViewComboBoxColumn = New DataGridViewComboBoxColumn()
With Tablenamecolumn
.Name = "DBTableName"[code]....
If I change things around a little bit and I get an argumentexception telling me that "DBTableName does not exist".I have one query that on startup calls for all my entries in purgeconfig table and it contains "DBTableName". Then I have another query which returns me a single column with many rows and a different field name and that's what I am using for the column's datasource. I can manipulate that query to change the column name to match "DBTableName" that the other datatable has, yet it still doesn't work. Do I need to create a data relation or something between them? Why aren't they wiring up?
The only way I can make my code work without the argument exception is to refer to my combobox with the field name of the column coming out of my View. Anytime I start using the other column name it throws the argument exception.This isn't the only column i'm going to need to do like this and i've spent a lot of time trying to figure out what i've done wrong and why it doesn't display the current value in the cell, only a blank cell insteadl.
1) Ive put the code to execute a file, it works fine but i want a way to show a popup/message if the file does not exist instead of the typical 'Unhandles exception has occured, system cannot find the file specified.' My code is below, i dont mind using a differend code as long as it opens the file Program FilesInfinity SoftwareAeroCrash Apps11.acep
[Code]...
I try to find online any example for create an application autoupdate.
When I run my application it check in a webserver if exist new version,if exist the software run update.
This code works. i insert 3 string and then check if the database already save this code.if the first string does not exist it works well.but when 1 string "already exist" or found in the DB, all of the next string say its already in db even though it haven't. what should i do?
For count = 0 To strArr.Length - 1
If strArr(count).Contains("=") Then
str1 = strArr(count)
coun = str1.IndexOf("=")
str1 = str1.Substring(0, coun)
[Code]...
I created a form with a checkbox and my purpose is if data have already existed, the checkbox will show a check when it launch however i am very new to VB( First time actualy). i google to find the answer but the best solution just tell me to use RegQueryValueEx, unfortunately,i don't know axactly how.
View 12 Replieshow to check the data is already exist in database using vb 6.0Naren
View 1 Repliesnamespace of "system.runtime.caching" does not exist but in object explorer and microsof exist.i use microsoft visual studio 2010 and .net framework 4.0.i also cant use this name space(System.IO.MemoryMappedFiles & System.Runtime.Caching.MemoryCache)
any body know what is the problem. i want my program after doing something (opening a file or any thing that can do something my program use more memory.)use memory like startup run.
Here's my code:
Option Infer Off
Option Explicit On
Option Strict On
Public Class Form1
Public Sub NewToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles NewToolStripMenuItem.Click
[Code]...
I have Requests for VB(2005) very very important for my selly project!i need a button that determine if file exist and if that file exist then show a messagebox!and if not show messagebox!.
View 2 Repliesbasically I've got a vb.net script connecting to IRC, and I'm working on making it a basic chat system, but I've run into a problem.
Say I receive this::nickname!name@tw-32151D9B.hsd1.vt.comcast.net PRIVMSG #channel :message
I want to grab specific information to output to the user.
I want to grab nickname and message
How can I go about doing this?I thought about using regex, but I can't figure out how to make regex grab message since there's nothing after it.
I have created a program that solves the right-angled triangle by just needing to input two known quantities. I have adapted this code from some I found on another website, it never actually worked, so I spent two weeks figuring out how to get it to work. I have finally succeeded, what I would like to do is display a message box if the user has not entered the required two inputs and presses the 'Calculate' button (see image). I just want it to say "At least two known quantities are required".I have some code that clears all the text boxes so you can enter new data, but I have tried countless times to find a way of coding so the message box appears.
[code]...
I have a form for end user (EU) to search for a certain code to check if it is an active code or not, i have the search bit working but i want to be able to have a message box saying "the code (code) is an active (product) code!"
So far i have:
Sub UpdateGrid(ByVal sqlStr As String)
Dim var As String
[code].....
How can I retrieve the following values from a MarketDataIncrementalRefresh?
Symbol/Instrument
Offer
Bid
OfferSize
BidSize
I'm familiar with Quote message handling, for example:
If quote.isSetOfferPx Then Offer = quote.getOfferPx.getValue
Tried the same approach on MarketDataIncrementalRefresh, but there are no such methods, and isSetField always returns false although the field does exist.
[Code]....
I am doing a project on sending and receiving sms from a serial port. But I have a problem on receiving sms. About the receiving sms, how can i show the received sms in the textbox using the serial port. Do I have to use the DataReceived Events. Here is the code i am using:
Public Class Form1
Private WithEvents serialPort As New SerialPort
Private ReadThread As Thread[code]....
I have a problem regarding to my Update data the message error show Syntax error near set LastName I already check my code but i dont know what is the error this is my code:
Dim sqlcmd As New SqlClient.SqlCommand
With sqlcmd.Parameters
.Add(New SqlParameter("@Id", lblid.Text))
.Add(New SqlParameter("@LastName", txtlastname.Text))
.Add(New SqlParameter("@FirstName", txtfirstname.Text))
[Code] .....
when the user search for the username and find it in the database it will be seen in the datagrid.. but my problem is when the reader does not found any data with the same username it will give a message that user is not find,,i use the command.executenonQuery and also the command.ExecuteScalar in my if statement.[code]
View 3 RepliesI have this codes here whereby my objective is to develop a writing network applications of programming, a means of sending data to a message board(messaging system). My problem is I couldn't connect it to the server's IP address and port num to send a data through a message board. However I could only display at Form2 txtReceive.
Text = HexConvert.Data_Asc_Hex(sData),
Whereby this code could only convert whatever data(txtSend) that is being typed in, could then convert hex decimal into a textbox(txtReceive). The final result that I would want to achieve is to be able to display the at the textbox(txtReceive) is the <"message protocol"> & <"hex message that is being typed"> & <"parity bit"> into the txtReceive box.
Form form 1, my codes are....
Imports System.Net.Sockets
Imports System.IO
Public Class Form1
Const portNo As Integer = 1234
Dim client As TcpClient
[Code] .....
I am trying to show message when user didn't enter any data in datagrid and click on save button it should display message please enter the required fields but I am using this code for this purpose.
For Each cell As DataGridViewCell In DataGridView1.Rows(DataGridView1.RowCount - 1).Cells
If cell.Value Is Nothing OrElse cell.Value.ToString = String.Empty Then
MessageBox.Show("Please Enter the Required Field(s)!", "ITPCHR", MessageBoxButtons.OK, MessageBoxIcon.Stop)
Exit Sub
[Code] .....
When I click on save button without entering data it give me message please enter the required fields but when I enter the data in datagrid it didn't save data and gives same message please enter the required fields.
I am adding data to a database table using Entity Framework. When adding a duplicate Primary Key I get an exception in InnerException.Message that reads "Violation of PRIMARY KEY constraint 'PK_StudentID'. Cannot insert duplicate key in object 'dbo.Students'. The statement has been terminated. "However, what I want to do is to rephrase this error message for the end user, but also save this exact message with the table name and column name to my logs for later. Essentially, I want to rephrase the error message to "You cannot have a duplicate entry for Student Identification Number. Please enter a new value."I have tried to inherit from System.Data.UpdateException and put an if check to see what the innerexception.message reads, and then change it accordingly. That did not work.
View 1 RepliesI have 5 textboxes embedded in a datagrid that require a date format (mm/dd/yy), but can be left empty if user doesn't have date. User can poplutes these textboxes for multiple records and hit submit button. On the submit i loop through the grid. If dates are populated AND they are in the correct format then I call a stored procedure that inserts the record into a table. If any of the dates that are populated in the textbox is not a date or in the incorrect format I need to display error message in a label. I got all this to work, but if it throws error message all the data in the grid is wiped out.
How can i keep data in each textbox and still display the error message?
When you Use Socket.Send Ether in VB6 with the Winsock control or Vb.Net sockets / Windows API does it generate that if you send "Hello" that on the other side it will get the Full Message Before the Data Arrival event is triggered??Or is it possible it can get it in two Different events like "He" & "llo" and a Last question, TCP is stream oriented, is there a Protocol that is Message Oriented but is wrapped with TCP, if not what is a good Delimitor to use with TCP, Usually ide use &H1 OR &H0 but I assume &H0 is common.. or Should I just add a Length Param before each Packet I send..?Now if thats the case and I got the Delimitor route... What if Im sending Chunks of 8192 of a File in a while loop and on a different thread I send a Command if I use the Length Param isent there a huge chance that the messages will get sent like this
[code]...
BUT the issue lies as it thinking that only the 3 of 4 of the incomming file Frames are getting Recv due to it not knowing which frames are for which. Mainly due to me sending a big burst and on the other side recving random chunk sizes on the other side.Edit: Got another question, If I send two bytes across the internet via TCP, will they ever arrive as two different I belive the term is Frame or is that only when they exceide the size of the MTU will the Message be Split. The reason why is if I send a Header saying SOH, Length Of Message(2Bytes), thats 3 bytes can I say 100% of the time the computer on the otherend will recv that all at once so I can parse it? And What ever happen to Flush for Winsock?
I have 5 textboxes embedded in a datagrid that require a date format (mm/dd/yy), but can be left empty if user doesn't have date.User can poplute these textboxes for multiple records and hit submit button.On the submit i loop through the grid. If dates are populated AND they are in the correct format then I call a stored procedure that inserts the record into a table.If any of the dates that are populated in the textbox is not a date or in the incorrect format I need to display error message in a label.I got all this to work, but if it throws error message all the data in the grid is wiped out.How can i keep data in each textbox and still display the error message?
View 1 RepliesI'm I created a SQL Compact database for a program I'm working on and built the tables and forms. I'm trying to add the values entered into the textbox in to my SQL DB, but I keep getting the following Error Message.
"SqlException was unhandled:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)" Below is my code....Its erroing at the cnx.open()
Private Sub btnSend_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSend.Click
Dim cnx = New SqlConnection(My.Settings.TestDBConnectionString)
Dim sQuery = "INSERT INTO tblMain (Date) VALUES (@Date)"[code]......
i just want to ask how can i trap the deletion message appears whenever i delete one item in may data entry? im using vb2008 and sql as my database.i know the code in access. does anyone know its counterpart in vb2008? here's the code in Access 2003acDataErrContinue
View 1 Repliesan error message when I am trying to load the data into a listbox and the value in the table is NULL. I am new in programming and I am using vb2005 Here is my
[Code]...
