IDE :: Disable Enter Key For New Line In VB Intellisense In VS 2010?
Jan 24, 2012
I find that each time there is a new line when enter key is press in VB intellisense is annoying. Although space is ok, but each time it has a new space and I have to press return to remove it, which is also inconvienient for multiple selections.
When editing C# code in Visual Studio 2010, the ENTER key makes IntelliSense complete the current suggestion, without adding a new line. In VB.NET, the default IntelliSense behavior for the ENTER key is to add a new line after completing the current suggestion.
How can I configure IntelliSense to change the VB.NET behavior to the C# one?I already know that I could press TAB or SPACE, but out of habit I always end up hitting ENTER (and changing line).
Does anyone know how I can setup visual studio to use the enter key to complete intellisense, but without moving the cursor to the next line? I use multiple other IDE's that work in this fashion, and VS is really throwing off my rythym with this.
I want to use Enter instead of Tab to choose from the intellisense list(This is in VB)From what I can se from this rather old post [url] it was not possible. Has anything changed from there? I use Visual Studio 2010 Ultimate.
When working in a VB.NET project in Visual Studio (2008 specifically, but hopefully the answer applies to any version) is it possible to have intellisense/auto-complete only show the "All" tab instead of the "Common"/"All" tab? Or alternatively, have it default to the "All" tab.
How do I disable the beep on the enter key? I am using KeyDown to use the enter key (instead of the tab key) to advance. But whenever I hit the enter key it beeps.
I have a problem in my form I am trying to stop my form from being submitted or closed
I have 2 buttons accept btn and cancel btn whenever the user pres enter or ESC the form is closing I tried everything from key press to key down and nothing works,
I am having a form and datagridview.now the problem is that when form load and iam write something like saniplast so data of datagriview select similar saniplast when i pressed enter so the datagridview_keypress
When i press the enter key,i can login.But i face a problem which is there will repeat call the login function when i press enter key a fews times and there got error! how can i make the enter key is disable after i success login?
Private Sub button1_keydown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TabControl1.KeyDown
Protected Overrides Function ProcessCmdKey(ByRef msg As System.Windows.Forms.Message, _ ByVal keyData As System.Windows.Forms.Keys) As Boolean Dim handled As Boolean If keyData.Equals(Keys.Enter) Then handled = TypeOf Me.ActiveControl Is ComboBox Me.SelectNextControl(Me.ActiveControl, True, True, True, True)
Can you show the coding needed to disable the enter key on a textedit box or at the form level?This form is using multi-line textedit boxes and I would like to prevent the user from pressing the enter key from jumping to the next line in the textedit boxes.
Is there a way to prevent the Enter key from being interpreted as a button click.
I am trapping key strokes at the form level but if a button has the focus and the ENTER key is pressed I cannot trap the enter because the button consumes it as a button click event. I am also unable to trap the enter key in any of the button's key events.
I am interfacing with magtripe swipe and barcode readers that send their information as keystrokes with a CRLF at the end. I have a work around by chaning the focus to a textbox anytime keystrokes are detected but I am hoping for better control.
Is there a way to disable the buttons ability to do this?
I am using the given code to copy my database files...it works like a charm in debug mode but as soon as I create a setup, it stops working. The error is
"Database Detach Failed"
I tried checking the code line by line and found that the code does not enter the IF block.I have no idea why.
Public Sub bk() Try Dim strDatabasePath As String = My.Computer.FileSystem.CombinePath(My.Application.Info.DirectoryPath, "LIC.mdf")[code].....
is there an option to retain Intellisense suggestions but turn off the auto-complete completely in VB 2010? Since upgrading to Visual Studio 2010, I find that Intellisense's auto-complete is far too eager to replace code. It often happens that while typing a section of code I will find that I need a new variable. Rather than back up in the code and create the variable, I want to be able to type on and add the Dim statement once my train of thought has reached a good stopping point. However, as soon as I try to use an undefined variable or method or property, Intellisense jumps in to replace what I have typed with gibberish.
I like Intellisense showing what methods, properties and parameters are available; however I would like to turn off the feature which automatically triggers auto-complete whenever I type ahead.
i wanna make it so i disable or maybe comment out line of codes 4 5 6 in the code but also make them work again ...decomment them.set Site values in FTPWebRequest in
In attached screenshot we can see that VerticalOffset property is ReadOnly. However,IntelliSense description says that we can also set value. Attachment:
I am using Visual Studio 2010 Prof. In C# I can create my own Enumerator and use it like this:MyEnum value = Now, Intellisense will suggest a value of MyEnum. In VB, when I write:Dim value As MyEnum = I get a huge list of every types. When starting to write my enumerator value (could be a word like "sunny") it filters out some types but I would like to have it like in C#. Anyway I will use the MyEnum type and no "String nor Objecte nor IntPtr...".
I've built a dialogbox with a RichTextBox and I'd like to have the following behaviour:
I've got the focus (cursor) in the RichTextBox. When the ENTER key is pressed, then there should be a new line in the rich edit control created. The ENTER should NOT close the dialog box [as it does now :-( ].
I just upgraded a project from VB 2008 to VB 2010. Before, the project did not use LINQ. I have started implementing it. So, I have updated the target framework from 2.0 to 3.5, and added a reference to System.Core, and imported the namespace System.LINQ to the entire project and also imported System.Data.LINQ into the form I'm working with (because it was not available in the list for Imported Namespaces in the references tab).
It's not throwing any errors now, but my IntelliSense is not working for LINQ stuff.
For example... I write this:
[CODE]....................
Then, if I type S. on the next line, the IntelliSense doesn't grab what it should for S (Only get Equals, GetHashCode, GetType, ReferenceEquals, and ToString, instead of the options I should get like Count, First, FirstOrDefault, etc...). If I Type S.First. then its the same thing, no IntelliSense that lists the available fields for S, just the standard options (Equals, GetHashCode, GetType, ReferenceEquals, and ToString). I should be seeing my column names in my table when I type S.FirstOrDefault.
So any ideas what is going on? When I type the code, for example, MessageBox.Show(S.FirstOrDefault.FirstName), it works perfectly. But it doesn't change the casing of the text (so it would read s.firstordefault.firstname) and no intellisense while doing it. But no errors. BTW - Everything works perfectly when creating a NEW VS 2010 application, it's just my projects upgraded from Visual Basic 2008 that have this issue.
I have a richtextbox which has CSV values in each line. Whenever a line is inserted, after pressing a command button the program lets the user know how many categories each line has.
Example: Line1: a,b,c,d,e Line2: x,y,z
Pressing the command button would say: Line1: 6 categories, Line2: 3 categories. This works fine, except from when I want a line to NOT contain any categories.
[Code]...
I understand that VB recognizes the vbCrlf on Line2 as a char, hence a 'category', hence the line is not empty. But what happens when I want to consider a line as empty (ie Line2:0 categories)? Should I go with something like if txt.line(i).text = vbcrlf then...? This solution seems kind of like bypassing the problem instead of actually solving it.. Or maybe it's just me?
I'm making a notepad program and I'm trying to make it so when you press enter on the very left side in the RichTextBox, it'll tell you what line your on. For example:
Is there a way to disable the new VB 2010 implicit line continuations feature in Visual Studio 2010. We are using an TFS 2008 built service which doesn't support the new feature (sources in VS 2010 without errors getting built errors in TFS 2008 built service / we cannot update to TFS 2010 built service).
I am new to programming- basically I have a richtextbox1 with some data from the database,but when you scroll it scrolls 3 lines, whereas I want to scroll only one line at a time.
Private Sub Button6_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button6.Click Dim mySelectQuery As String
in my form_load sub i added a line to enter a new row when the form is loaded by using me.bindingsource.AddNew()Is there anyway i could tell it to only add a new line only if the rows are empty, the table does have a primary key column where its seed is 8000 i dont know if this would make a difference to how you would make it work