Is there a way to have a form within a program that doesn't dispose when you close it? I have a form in my project and a menu item to show it. When I declare the form globally and show in menuItem.click, then the click event breaks because the form no longer exists. When I declare the form within menuItem.click, then this creates a new form every time I click and that's not what I want.
View 1 Replies
what I want to do is cancel a MDI child form closing when the 'X' at the top right hand side of the form is clicked.So, I use e.Cancel = True in the MDIchild_FormClosing event.However, the parent will not close if the 'X' button is clicked, and I noticed that the FormClosing event of the child handles 'Me', which I assume is the parent.Changing the handles 'Me' to handles 'nameOfChildForm' only generates an error Error: Handles clause requires a WithEvents variable defined in the containing type or one of its base types
View 2 Replies[Code]....
here i am dealing with only two form,so if i add form1.close() in the form2 button click event then it might wok. but what if i deal with many forms and i need to show and hide them several times?
I am trying to get a label to show briefly (3 seconds) when the form loads. The following code gives the 3 seconds, but the label doesn't show. The label is set to visible in the Designer properties.[code]
View 8 RepliesI have a main form that has a button with which a smaller form is shown. Think of the smaller form as the Find/Replace dialog in many applications, such as Notepad. It's important that the form is (what I believe is called) modal. What I mean is that it always stays on top of the main form. I ensure that by calling the Show method with "Me" as the owner argument. Whenever the small form loses focus it will not disappear into the background but stay visible (albeit out of focus). If you don't understand open up Notepad and have a look at the behavior of the Find/Replace dialog.
Here's my problem: instead of actually closing the form when the X is pressed, I want it to simply Hide itself, so its position and the state of any controls (checkboxes etc) is preserved automatically.To achieve this I simply cancel the FormClosing event and Hide it:
vb.net
Private Sub Form2_FormClosing(ByVal sender As System.Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles MyBase.FormClosing
[code]....
To show the form, I use the following (note the (Me) to make the main form the owner of the form; this ensures that it remains visible even when it is out of focus):
vb.net
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Form2.Show(Me)
End Sub
Now. When I run my project, and open the Form2 (small form), then hide it again (by 'closing' it), I can no longer close the main form (Form1)! It seems the main form cannot close when the small form still exists (albeit invisible)...?? When I don't use the Me argument in the Show method, I don't get the behavior I want. I know I can set the TopMost property to True but that will also cause it to become visible on top of all the other forms, even windows not part of my application.
I am using VB.NET (Visual Studio 2008) and thus .Net framework 3.5. I have developed an application which has a MDI form and then has several other forms, most of which are shown using form.showdialog and some set of forms are shown using form.show.Whenenver a form (shown using form.showdialog) was closed (usually by clicking on a button (OK or Cancel)) I wrote code Me.dispose. After careful testing and R&D I figured this caused flickering on the screen. There use to be a flicker on the screen and it looked weird.In some rare circumstances if I clicked on button and form closed using me.dispose the focus of application was lost and some other program that was running came on focus. (This has happened but was rare.)Now the reason I used disposed was that after a form was shown using .showdialog I didnt want its contents to be in memory so I used the .dispose thing. But I noticed that If I use form.close then there is no flicker and form closes fine. But I think that would not dispose the form from the memory.
What should I do so that form closes and is disposes as well without any flicker.?I read on net that for forms shown using .show it gets disposed off automatically the moment it is closed (by using me.close) or user clicking on cross. Is this true? I also think that If I call a form using showdialog then I can write formx.dispose from where I am calling and not in the form itself.
The form is an About Us form so has nothing on it only a text box and a OK button.
[Code]...
Why won't the button close the form? I'm puzzled, I tried another button just in case with the same result. UPDATE: I set a break point on Me.Close() and it isn't reaching it when I click the button, I created a new button and the same thing happened.
I am using VB.NET (Visual Studio 2008) and thus .Net framework 3.5. I have developed an application which has a MDI form and then has several other forms, most of which are shown using form.showdialog and some set of forms are shown using form.show. Whenenver a form (shown using form.showdialog) was closed (usually by clicking on a button (OK or Cancel)) I wrote code Me.dispose. After careful testing and R&D I figured this caused flickering on the screen. There use to be a flicker on the screen and it looked weird.
[Code]....
I have set up a notify icon for my form. I want to make it so that when the user clicks the close button that it doesn't close the form it just takes it to shows the notify icon. They can exit the program from the notify icon. Can someone tell me how to keep it running?
View 2 RepliesI'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 RepliesI'm curious if it is possible to hide a group of text boxes from view in a form until a particular condition is met, and to have a custom set of text boxes for that condition. To give an example; I want radio buttons offering choices for a manner of searching records, the user selects one and then a specific set of text boxes are displayed for the user to utilize, if a different option is chosen a different set of text boxes will be shown. Is this something that can be done?
View 7 RepliesI have a situation where me.close() doesn't close the form. I have a form with a button with the code seen below. What happens when the button is clicked is the new form shows, but the original form(calling form) is still there. When I go into debug mode, I can see the me.close() execute, but nothing happens (calling form stays open). When I close the second form both forms close. If I comment out the call for the second form to open the first form closes without problem.
Private Sub cmdNext_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdNext.Click
Dim f As New frmOrder3
[Code].....
I have a form that has around 4 txtboxes. Data is inserted into these boxes and then a "Save" Button is pressed. I have a GridView added to my form and want to view the entries. The issue I am having is that when I click the save button the data doesn't show up in the DataGridView until I close the application and then re open it.
[Code]....
get a button on form A to open form B and then close (not hide) form A when clicked?Background: I am coding a VSTO application for Excel in VB2008.
Private Sub FormAButton_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles FormAButton.Click
Dim FormB As New FormB
[code]....
I'm trying to fix all my project warning according to Microsoft code analysis (CA:XXXXX) One of the warning is "CA2000: Dispose objects before losing scope" My Code is:
[Code]...
As Autodesk is going to discontinue VBA for their Inventor product in the near future I have been looking at other ways to run VB.NET in Inventor. To date it doesn't look like VSTA will be the replacement. Automation from an External VB.NET app is certainly possible, but leaves something to be desired for speed and integration. Compiled Add Ins are the Cadillac of choice but can be a royal pain to debug and develop. Autodesk now provides a lightweight VB.NET script interface called iLogic. It's main purpose is to allow extreme customization of Solid Modeling parts. The code actually resides inside the Part Model file.
[Code]...
How can I add a scrollbar to my form I tried the auto scrollbar option but is not working ??
How can I validate the user inpute inside a textbox to check that he type the desired word?? for Example validate if the user typed the word ( Bob)?
how to maximize my form window and for example my list view, tool strip container etc etc, maximize with the form window. I would just create the form to my monitor 1440x900 but this will be used on several computers all with different monitor size. What I'm looking for is a quick easy way of doing instead of setting each one up separately.
View 1 RepliesIn VBA you can have a Userform implement a custom interface and only the properties defined in the interface will show in the VBA Intellisense for the Userform. I tried to duplicate this functionality in VB.Net (2010) and all the base Form properties still show.[code]...
View 2 RepliesI have a Main form that lauches sometimes a secondary form with the
frmAlert.Show()
code... (FrmAlert.TopMost = True)
some seconds after, from the Main form I launch the
frmAlert.Close()
but the form don't closes itself!
[Code]...
to activate the form, but it don't closes itself, both with .Close or .Dispose or .Hide code even if it is activated by frmAlert.Select()... the FrmAlert.Visible property remains = False
I have a simple Windows Form that hosts property controls at runtime. When the user clicks Close [X] I want to keep the window and its contents alive rather than killing it by handling the FormClosing event, canceling the event and simply hiding the form.
That's fine but at close of the application I need to actually close the window. I implemented the below but it feels kludgey. Is there a simpler, more clever way to handle this situation? (The form's controller calls KillForm explicitly after it receives a closing event from the main window.)[code]...
How would you add a Dynamic Contextmenustrip to your form and how would you add the items to the contextmenustrip. Also when adding the items to the menustrip is it possible to give them names and text dynamically if so how?
View 5 Repliesknow that there is library which can change the theme of the form but i do not
View 1 RepliesI'm looking for a tool that will allow me to display, and change forms, inside my original form.
View 5 RepliesI have following code to resize the form at run-time but it does not work. Form size remains same. What could be the possible reason?
frmErrMsg.btnNo_Err.Visible = True
frmErrMsg.btnOK_Err.Text = "Yes"
frmErrMsg.Height = 800
[Code].....
I am using a MDI form and child forms. Now I don't like the standard back colour of mdi form so I got code on the net which paints a gradient colour to the mdi. So far it is working okay.Now the problem is when I load a child form or close it or do a similar activity then it causes flicker in the mdi background. This gets pretty annoying at times and you see the background flicker.
View 2 RepliesI've got a form with no borders, and I am wondering how a user would be able to move this form around. I would like it to be moved the same way a form would move by left-clicking and holding the top border. I know that's a little vague, so if you need any more info feel free to ask...
View 1 RepliesOk, i know the simple media controls to play a video file on the control screen, but is there a way to play the video on the form background?
View 2 RepliesI have a Visual Studio 2005 VB project that creates a fairly simple form containing three text boxes with corresponding labels. In terms of property settings I have AutoSize set to True, AutoSizeMode set to GrowAndShrink, SizeGripStyle set to Show, and WindowState set to Maximized.
I'd like the user to be able to grow and shrink this form using the resize grip that appears in the bottom right corner. When the application starts, it starts maximized, which is what I want, and it has the typical minimize, restore down, and close buttons in the upper right corner.
I can use restore down to reduce its size, and once that's done I can use the resize grip to make the form larger, but the resize grip will not allow me to make the form smaller. Changing WindowState to Normal doesn't change this behavior.
I've got an app that I want to have an MDI with. It functions fine, but there needs to be a control panel off to the side of it to drive the child documents' creation. I have two problems with this.
First, if I add the control panel to the side of the form, it just overlays the MDI portion of the form and the children will spawn behind it. I can more or less manage the positions of these children, but the problem comes when I want to minimize the children, they minimize behind the control panel and I don't know how to move them. So I need to shrink the area they can move around in. I've read in places that you can use the splitter object, but that never seems to cooperate with me and only wants to move to the extreme left or right of the parent form. How can I reduce the area the children get to interact with? I've tried creating a MDI Panel, but VS has a fit with that.
Second, I've got a datagridview holding the data that will spawn the child forms. This is working well, but even though I've set the rows to be not resizeable, I can still make them grow or shrink during run-time (not programmatically). How do I stop this?
