Interface And Graphics :: Unable To Import Rotatetransform Namespace?
Dec 6, 2010
I got a graphic that I got to rotate about a specific point. So, I got to define the centerX and centerY, the point about which to rotate. For that, I am importing the namespace: "system.windows.media.rotatetransform"The following problem then arises when the above namespace gets underlined with a green curly line and when I place the mouse over it, the following message is displayed:"Namespace or type specified in the Imports'System.Windows.media.rotatetransform' doesn't contain any public member or cannot be found. Make sure the namespae or type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases."
how to enable the "import" button when at least one of the checkboxes is checked.I have two buttons : "Deselect all" and "Select All" for the checking of the boxes, to import the specific files' data they want to Excel. (the files are in listbox, and the checked boxes is for selecting the files' parameters that they want to see in excel)
One option:When the user deselect all, the "import" button is suppose to be disable to prevent the user from importing the files' data parameters.
2nd option:(if i do not want to disable the import button) or show message that they have to select at least one box and at the same time, prevent the import button to work if there's no checked checkbox. So my deselect all button code :
but the button still remain disabled if I click "unchecked all" button and then checked at least one box. how do I enable it?And how do i...show error message and prevent the files' data to be imported when the user click "import" when there's no checked checkbox if I choose the alternative option of using message to alert them without disabling the button and yet prevent importing of data?
PS: If I did not click "deselect all" button but click the "select all" button, the import button is enabled and working.
I'm using the following calls in a vertical label control: (borrowed from another project)[code]But if any of the text characters are a V or W there are funny jagged artifacts in those letter's angled lines. Does anyone know how to fix this? I tried looking up anti-aliasing etc.. but aside from changing the smoothing mode to antialias I couldn't find anything (changing this doesn't help a bit)
I have a Visual Studio 2005 VB project that creates a fairly simple form containing three text boxes with corresponding labels. In terms of property settings I have AutoSize set to True, AutoSizeMode set to GrowAndShrink, SizeGripStyle set to Show, and WindowState set to Maximized.
I'd like the user to be able to grow and shrink this form using the resize grip that appears in the bottom right corner. When the application starts, it starts maximized, which is what I want, and it has the typical minimize, restore down, and close buttons in the upper right corner.
I can use restore down to reduce its size, and once that's done I can use the resize grip to make the form larger, but the resize grip will not allow me to make the form smaller. Changing WindowState to Normal doesn't change this behavior.
Im working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.
I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.
drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.
I'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
Ok, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?
I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
I'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll: Code: Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer Function SetData(Data As Integer) end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?
So I decided to make my famous tile selector project, but instead of drawing in a form's graphics, do it inside a tabpage.Well, I managed to get it working, but it seems to... flicker.Normally, setting the form's DoubleBuffered property to True would help a lot there, but apparently, the tabpage has no such property.
When I invalidate the tabpage, I draw two images and fill one rectangle.Following past advice, those two images were created before, just once, and are stored in a variable so I don't create them every time I invalidate the tabpage.
I just converted UberSite, a vb.net web site to a web application. I get run-time errors saying that there is no such thing as type foo. When I drill down to the page in the code-view, it gives me an error-correction suggestion: import namespace UberSite.
If I create a new web application and define foo there, there is no need to import any namespace to use foo in the new application.
How can this be? Why does my web application seemingly need to import its own namespace?
I can't seem to find a clear answer as to how to import the proper namespace for ReportingService [URL]. I tried to follow the instruction here [URL] but there is no Add Web Service option showing when I create a console application. There is a service account. Should I just use that instead?
I have a bizarre vb.net problem.I'm working with a 3rd party library with a namespace called Telerik.Webcontrols. The library is in a web site project that I am in the process of converting to a web application project.
Telerik.WebControls contains a class called RadAjaxControl.In the original web site project, I have code that looks like this:
public sub page_load(...) dim foo as Telerik.Webcontrols.RadAjaxControl
Once I convert to a web application project, it says that Telerik.Webcontrols doesn't exist.
However, the truly bizarre thing is that the following code does compile:
imports Telerik.WebControls public sub page_load(...)dim foo as RadAjaxControl
I am having problem with importing Crystal Report, each time I type the following commands, they are underlined: Imports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.SharedImports System.Data It tells me the namespace dosen't contain any public member. So I am unable to declare any crystal report object because the namespace is refusing to be imported.
I am using the Microsoft Encoder 4.0 dll's for capturing any activity. I have used registered dll as been imported in my project. but if the expression is not installed then there comes error in my application code.(actually the dll is missing to be used if expression encoder is not installed)."how to check for available dll and use it in my code?"
I load my picturebox with a jpeg. If I put my DrawObjects() sub into picturebox paint event.When ever a picturebox.refresh or picturebox.visible = true (vb.net seems to draw my DrawObjects() first, then load the jpeg Image over my drawing - erasing drawing) Is there a way to get the picturebox to redraw the jpg image first then draw on it, in picturebox paint event?
I am trying to create a custom LabelFor helper to apply by default instead of the standard LabelFor helper include in System.Web.Mvc.Html. I want my LabelFor to take model properties that are PascalCase and make a label that appears as multiple words. For example the property FirstName would appear as "First Name".
I found this post that shows how to make a custom LabelFor helper that allows the addition of html attributes. I recreated this helper in VB.Net and modified it to do what I want, but I am not able to get it to work.
[Code]...
The sample includes this Module in Namespace System.Web.Mvc.Html but when I add the namespace declaration to this module everything in the rest of the project goes haywire. For example, each of my models has a Primary Key property that is a Guid datatype and as soon as I add the namespace above to the module, I get several errors stating that System.Guid is not defined among other similar errors.
I've tried to import my project namespace into a view in order to use the custom helper, but then I get an error that says Overload resolution failed because no 'LabelFor' is most specific for these arguments.I am trying to avoid having to specify a DisplayName for every PascalCase property I have in many models.
how can I import the System.ServiceProcess namespace into a WPF project in VB.net (not C#)? The ServiceController object is not in the toolbox in VS2008 and can't see to figure it out. Any ideas? If that particular namespace cannot be imported into WPF projects, could somebody suggest another way of controlling windows services from a WPF application? I know this framework is focused more on multimedia apps, but would really like to switch over some of my tools to WPF.
