Is there any event in datagridview like Dgv_TextChanged. Like When we double click on a textbox it create a Textbox1_TextChanged event. Actually i want that, when i start writing numeric value in datagridview cell, it start calculating in another cell, as we write in textbox it start acting/calculating with the each inserting value in another textbox.
View 4 Replies
Using VB.Net, I have a DataGridView with a ComboBox Column. What even do I use for when the user changes a selection in the ComboBox?
View 4 RepliesI have a bound datagridview containing 4 columns. All I want to do is click on a row and then assign the value for each column to other controls (in this case textboxes). My problem is, I'm not sure which Event to use. I don't know how many events I've tried the code below in several different events but none of them are working.[code]
View 5 RepliesI can't seem to find the exact answer I am looking for. I have a datagridview control on a form bound to a binding source. I want to use a binding navigator to control the additions and deletions of rows. I also need to prompt several default values when a new row is created.
I can accomplish this task if I allow the user to add new rows. When the row is added, my default values are loaded through the DefaultValuesNeeded event. However, the click event on the Add Item in the binding navigator does not call this event. How can I force this event to be raised when clicking on the binding navigator add item button?
How do I set the all data in the datagridview goes into the textbox?For Example Fields name.LastName the data will be shown into lastname.text , FirstName will be shown into the firstname.text and also the other fields into the sql database.And how also to can not type into the datagridview or will be disable to type in every cells.
View 8 Repliesi got another problem with this selectionchanged event in datagridview1, i set my datagridview1 to Selectionmode = fullrowselect.
the problem is i got nullreferenceexception error whenever i clicked the column header, so meaning selectionchanged fire when i click the columnheader since columnheader will have a row value of null the exception appears, i tried to catch it but ending up in messy situation which the code i written doesn't run right. is there anyway to prevent user from clicking column header but it still visible? but if i do that user cant sort the data right. [Code]
I have found a problem with the DefaultValuesNeeded event of the DataGridView Setup a form with single DataGridView and add 2 columns using default names. Go into form design and in the Form header write a Dim I as interger line Create a DefaultValuesNeeded event for the grid and enter the following code.
[Code]...
I've been searching all over and I'm either not searching for the right words or it just doesn't exist. I've got a datagridview (dgv) on a form with some textboxes that are databound to different fields in the dgv's datasource. I want to capture an event if someone changes a value through one of the databound controls so I can mark the row as modified. I've been going through the dgv events trying to capture something, but I can't find anything that fires when a value is changed. The dgv is read only, so the values can only be changed through the databount textboxes.
How to I know if someone changes a value in the dgv? Is there a setting in the dgv that will tell me if a row is modified?
I am trying to colorize my datagridview in event cellformating (as written on msdn [URL])but it works so slowly. I have seeing before more difficult possibility to set color for cells thrue Class, but currently I forgot where it was and can't find. Or may be my datagridview is slow self. Is it exist a possibiity to make this element faster on VB.net?
View 3 RepliesI was wondering if there's an easy way to make a cell textchanged event for a datagridview, like you have the textchanged event for textboxes, an event that gets triggered everytime the user press a letter/number/symbol/backspace/space, so i can check in that event if the datagridview has changes and whether i should enabled my save button to save the changes made.
Or is there a better way to check whether i need to enable my save button?
my Question is that if i ./ tick the Checkbox in datagridview the datagridview Column (4) value show in textbox if user click multiple tick in datagridview , the datagridview column(4) value add in textbox
For a = 0 To DataGridView1.Rows.Count - 1
If DataGridView1.Rows(a).Cells("checkbox").Value = True Then
TextBox8.Text += DataGridView1.Rows(a).Cells(4).Value
End If
Next
I just want to know if there any equivalent event (ADO. NET VS 2008) event as in MS ACCESS Form's OnCurrent Event.The reason is I like to make some calculations based on some data bound controls with current datarow data when user clicked a row in DataGridView (or by using bindingNavigator). I've tried with DatagridView's RowEnter event. But some Data bound controls are not yet reflect the data of current datarow when that evet was fired.
View 2 RepliesPrivate Sub dgvEquipTran_DefaultValuesNeeded(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewRowEventArgs) Handles dgvEquipTran.DefaultValuesNeeded
e.Row.Cells("ID").Value = Me.cbxID.Text
e.Row.Cells("Rate").Value = 12
End Sub
I've got the above event setup. However after select and delete the last row of a one row datagridview, the above event doesn't fire. Even when the current selected row is the new row (one with *). I have to click away, on the next tab and back again before it is fired and populated the new row with the values.
I have been reading up on this, but I can't get it to work for me. I am reading in comma delimited text into a three-column datagridview control. The third column is a combo box which only accepts certian values. If the data being imported into col 3 is not in the combo box list I get an error that tells me to handle the data error event.trying to capture that error and get rid of the default error message box. I am working with a Try/Catch statement, but it doesn't seem do anything.
Do Until fileReader.EndOfStream
stringLine = fileReader.ReadLine()
If Not stringLine.StartsWith("'") And Trim(stringLine) <> "" Then
[code].....
I cannot Unresolve a post.I have a datagridview control with a combo box. The user loads data from a file into the control. If there are errors (the element in the combo box column is not in the combo box list) I would like to:
1. capture the row in which the error occurred, and store it in code/memory
2. change the cell backround to red (this is not that important)
3. continue without a message at the time of the error
4. post a message with all of the errors after the load is complete
I am using the code staight out of the Microsoft example to try to figure how to do this, but it is not posting any messages when I load bad data, so I am not getting any smarter from the example.[code]
how to load a new table into a datagridview on a click event. What I have is one datagridview and three buttons. I have a sales button, an inventory button, and an add inventory button. What I want to do is be able to click a button and have it load the corresponding table into the datagridview.
View 3 RepliesI have a datagridview that I would like to validate using the cellvalidating event. however as the user doesnt navigate between cells or rows in the datagridview. just enters data in a cell in the datagridview and then clicks a save button the cellvalidating event doesnt get fired.
View 4 RepliesI have a datagridview comboboxcolumn populated with jobs. these jobs have a wage attached to them. for example job "Policeman" has a wage of R20.I have 5 checkboxcolumns for each day of the week as well. so if I check 3 of the checkboxes and have the job "Policeman" selected, I must then calculate the weekly wage (3*20=60) and display the wage in the weekly wage column. which event is best to handle this.
View 2 RepliesI have a datagridview that completely updates anytime changes are made to it. It is not connected to a source but rather the datagrid is filled when first launched.
View 1 Replieswhy the first code block below works, but the second code block does not? (Only thing I can see is the
Handles DataGridClaims
syntax
Block 1
Private Sub DataGridClaims_CellContentClick_1(ByVal sender As System.Object, ByVal e As
[code]....
i have a datagridview i have an edit button associated with each row. on CellContentClick event i am dynamically deleting and creating number of textbox and label controls in my tablelayoutpanel this dynamic deletion and creation of control is taking some time also flickering (well thats not a big issuse)but the problem is if someone continuously keep clicking on edit buttons of various rows after some time the whole tablelayoutpanel is a complete mess.
accordng to me this is happening coz my CellContentClick event is not geting time to complete and before the event get complete one click the edit button of some other row . and i am unable to handle this situation
am adding some more details -
the handler code is here
Private Sub gdXMLDOc1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles gdXMLDOc1.CellContentClick
Try
If lockThis = False Then
[Code]....
I have a datagridview which is populated from the SelectionChangeCommitted event of the combobox. The datagridview contains both bound and unbound data columns (see below).
View 1 RepliesI want to add and remove Datagridview in VB.NET with button click event. Can it be possible.
View 2 RepliesI want to add a new rows when cell leave event occurs.It shows error like Operation can not be performed in this event handler...
here is my code,
If PatientDataGridView.CurrentCell.ColumnIndex = 2 Then
PatientDataGridView.Rows.Add()
End If
i am using the following logic to capture the keypress event in a dataGridView so that I can edit numeric cells but cannot capture decimal value in my code i cannot pass the digit.
[Code]...
I handle the validation in the CellValidating event, and if the cell is invalid display an error message, then cancel the exit of edit mode. However I would also like to erase the content of the cell currently in edit mode.
View 18 RepliesI have field NAME nvarchar(5),Checkval bit in sqlsever. I want to bind already to Datagriview in vb2005. When I check filed checkval. It will to do something that I need. I don't want to use event cellmouseclick or cellvaluechanged because it didn't react when we click. Which event that do transaction when we click check.
View 2 RepliesI'm using an on key down event for my datagridviewer that fires every time a key is pressed while the datagridviewer is selected(Focused).I want the same thing to happen while in a cell, but there is no event for key down in a cell.
View 3 RepliesI am learning Visual Basic 2008. I have created a form with a datagridview bound to a dataset. I also added a button to the datagridview. When the button is clicked I want to be able to update a couple fields in the grid with new values. How do I intercept the click of that button?
View 4 Repliesi have a datagridview with a readonly cell, i would like to show a formdialog window when the user press the space key. but is not possible since the cell is readonly=true.
i'v been using the following code with the EditingControlShowing event. and when the cell is readonly=false it works sometimes.
Private Sub sub_fecha_keydown(ByVal sender As Object, ByVal e As KeyEventArgs)
If e.KeyCode = Keys.Space Then
Dim frm As New frmFecha
[Code].....
