DataGridView: Catch Event When It's Row Became The Current Row?
May 11, 2009
I just want to know if there any equivalent event (ADO. NET VS 2008) event as in MS ACCESS Form's OnCurrent Event.The reason is I like to make some calculations based on some data bound controls with current datarow data when user clicked a row in DataGridView (or by using bindingNavigator). I've tried with DatagridView's RowEnter event. But some Data bound controls are not yet reflect the data of current datarow when that evet was fired.
i have problem when i click a ADD button, there is one null value in the textbox .. so the try catch statemnt is to catch that null value error but after that the catch is success but the button click never stop excute the statemnt till the end of the button event.
Using the walkthrough from [URL], I implemented a DatagridView in virtual mode, totally unbound, in VB 10 Express (we are talking WinForms).
I understand that CommitEdit (DataGridViewDataErrorContexts.Commit) commits the current cell's contents to the data cache.
The example uses row-level commit, i.e. it pushes the values into a row buffer until the current row is left. Only then the row is added to (or updated in) the data store. That's exactly what I do, too.
Question -- how can I commit the current row programmatically without leaving it? (I want to commit the whole row, not just the current cell.)
If the user leaves the row, there is a RowValidating, RowValidated, RowEnter event sequence where the datastore update is taken care of. So one idea (currently my only one) was to simply re-set CurrentCell to Nothing, for example.
But I cannot just set the DataGridView's CurrentCell property to Nothing (or any cell outside of the current row) since I want to commit from within an event handler of a custom edit control created by a custom column, and I see an System.InvalidOperationException exception when setting CurrentCell there.
In fact, it is a tiny button right to a combo box, i.e. I create a DataGridViewComboBoxCell descendant which is a DataGridViewComboBoxColumn descendant's edit control. My special ComboBox cell adds a tiny button which should commit the current row. Unfortunately, that button's _Click event handler cannot change CurrentCell since DetachEditingControl throws the exception then.
Obviously, I must delay the CurrentCell re-assignment until the whole _Click event has been processed. Or what? How would I do that -- register a custom Windows message, SendMessage that one to me, and override the windows procedure of the form so it re-sets CurrentCell when this message is received? (Hello?)
There should be a rather easy way to let DataGridView commit all changes by firing the events that I handle to perform the datastore update, no?
I have a datagridview having 3 columns (qty,scraft factor,actuall qty). What I want is if the user encode 50 in qty and 2 in scraf factor, actuall qty will automatically computed based on qty multiply by 2. I was using keyup event. Now I am using endedit to get the current value of the current row and column, now the problem is if the amount to be encoded is more than one digit it will not accept because of endedit. What event do I have to used? or any solution with this scenario.
I want catch control + C system Event through by VB.Net means i devolped one project in VB.NET. In my project one search textbox if my project is minized and some word or else document opened and if user press control + C system event do then my minimized project open and selected word (means those word you select ) see in my search textbox.
How do I catch the new added datarow event? I'm using a dataset and bindingsource. I've tested Bindingsource's ListChanged event but it is a bit problematic. For example when I use those codes in the ListChanged event:
If e.ListChangedType = System.ComponentModel.ListChangedType.ItemAdded Then MessageBox.Show("Record was added..." End If
... records are added twice. If there is an another event for it?
How can I catch an exception thrown by a control event?I have a control that throws an exception in one of its events and I need to catch it but I don't know how.Consider for example that the text box control throws an exception in its click event. How can I catch such exception?
So basically I have a ComboBox on a form, which I populated by adding custom object named "Category" and by setting the DisplayMember to the property "Name" of my object.On another form that can be opened at the same time, I can edit the name of theses "Category" objects. I raise an Event, "NameChanged" but how can I catch it on the form which contains the ComboBox? Even if the property "Name" of the object "Category" change, the display on the ComboBox doesn't autoupdate. So I need to catch the event, but I don't know how to do it.
I want to move certain controls on a form when the webbrowesr controls' vertical scroll bar is scrolled. but there is no scroll event defined for the webbrowser control in .NET I am using Visual studio 2008 and VB.net.
A developer has created a custom control in ASP.NET using VB.NET. The custom control uses a repeater. In certain scenarios, the rpt_ItemDataBound event is encountering a data error. My goal is rather than having the user see the yellow screen of death, give the user a friendlier error explaining exactly what the data error is. I figured I would be able to use a Try/Catch block as shown below throw the exception, however, it appears that the event has nowhere to be thrown to and stops executing at the "End Try" line.
Protected Sub rpt_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles rpt1.ItemDataBound, rpt2.ItemDataBound Try ProcessBadData... Catch ex As Exception Throw ex End Try End Sub
In VB.NET, I can find where the repeater's DataSource is being set, however, I can not find a DataBind event. How I can capture the exception in this ASCX control so I can report it to the user. The stack trace looks like this. There is another repeater within the repeater that is actually causing the error (rptOther) and I'm able to catch the error, but I can only throw it to the rpt_ItemDataBound. How rpt_ItemDataBound is getting called without a DataBind event.
at Company.WebForms.Control.rptOther_ItemDataBound(Object sender, RepeaterItemEventArgs e) at System.Web.UI.WebControls.Repeater.OnItemDataBound(RepeaterItemEventArgs e) at System.Web.UI.WebControls.Repeater.CreateItem(Int32 itemIndex, ListItemType itemType, Boolean dataBind, Object dataItem) at System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) at System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) at System.Web.UI.WebControls.Repeater.DataBind() at Company.WebForms.Control.rpt_ItemDataBound(Object sender, RepeaterItemEventArgs e)
I have a button on a web page that I just need a little help with some extra code. I think I need a TRY, CATCH statement?, this is what I have so far: I have a simple web page that has a button which at the moment when pressed enables the user to add data to a DB table via a stored procedure.Once this button is pressed a pop up message box is displayed to let the user know the data has been passed. The user then needs to press the 'OK' button within this message box which then directs them to the home page of the site. This works fine.
The code for this is here:
Protected Sub btnAddRawData_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnAddRawData.Click 'database conn, this is linked to the web config file .AppSettings Using dbconnection As New SqlConnection(ConfigurationManager.AppSettings("dbconnection"))
[code]....
As I don't want the user to enter duplicate records in the database (This could be done by the user navigating back to the page where the btnAddRawData_Click is located and pressing it again.), I have created a UNIQUE INDEX named 'DupRecords' to stop the user from commiting this data more than once that day.When I run the web page now I get the following message in my browser:
Cannot insert duplicate key row in object 'dbo.GasRawData' with unique index 'DupRecords'.The statement has been terminated.The solution I think, is to add a TRY, CATCH statement into the btnAddRawData_Click code.
i want to automatically add all the events of the activeform under try catch block.i am using a simple code which puts the selected code of ActiveDocument under try catch ( using DTE.ActiveDocument.Selection )i have to manually select each event's code and apply the macro, which does not seems to be a very good idea.
I have a User Control. In this user control I have a Repeater. In this repeater I have again a User Control. If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired. Is there a way to catch this event?
Some code:
first user control:
[CODE]..........
In myUserControl:
[CODE]..........
This event isn't firing:
[CODE]..............
Also the following does not work because it returns nothing:
I setup a strongly typed dataset using the DatasetDesigner in VB2010. I am using the TableAdapter.Insert method to add data to an Access table. Before the data is inserted I need to validate the data using the DataTable RowChanging event.
How can I get the DataTable RowChanging event to fire when using the TableAdapter.Insert method?
Here is an excerpt of code I have so far:
When the Insert method runs, it does not fire the datatable RowChanging or NewRow events.
i have a User Control.In this user control I have a Repeater.In this repeater I have again a User Control.If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired.
I am using Visual Studio 2008 and VB.NET. I've got a listview control on my form and I've added columns using the windows forms designer. As you know, if you double-click on the sizer or divider or whatever you want to call it between two columns, the column on the left will autosize (unless you disable that). How can I catch this specific event? The ColumnWidthChanged event and the DoubleClick event are likely candidates, but in the ColumnWidthChanged event, there's no way I can see to determine if it was an autosize. Similarly, there's no simple way to catch what was clicked exactly with the DoubleClick event. how I can catch this specific event type?
I get this error when trying to populate a DataGridView.The last sentence of the error text says to handle the DataError event but I'm not sure how to do that. A Try...Catch doesn't work.
I have a program in VB.Net that receives mails from Outlook, extracts attachments and inserts the attachments into a table through a query. I would like to put the query/queries in a Try/Catch block, but cannot do so as Outlook exceptions cannot be caught, and it gives me an error, and unless I put a very specific exception, I cannot catch it. Is there a workaround?
Edit:
Try Catch ex As Exception End Try
Exception is underlined and when I hover on it, it says: "Catch cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not in 'System.Exception' or a class that inherits from 'System.Exception'". This is affecting all my other code which I'd like to put into a Try/Catch block.
The following code causes a "Warning" that Variable is used before value assigned.How do I restructure this Try/catch to eliminate error on the myreader.close command in the Catch part? Code appears to work fine but I dont like Warnings. [code]
I have this scenario: in a Sub I have a Try...Catch statement.Within that Try..Catch I call another sub.In that 2nd sub is also a Try...Catch.(see below for example).Now if an exception occurs in the 2nd sub's Try...Catch, which Catch gets excecuted? The 2nd one, the 1st one or both?
I have a processing in a do loop. In variois points within the loop I check if the variable "bCancel" is true. If so then I exit the loop and terminate the treatment. When I click the "Cancel" button, I set the variable "bCancel" to true. Basic stuff, but I would like to know how the click event is ran while my current thread is busy looping? I've found a reference to a "Gui thread" on the net but Its not very clear is this thread in inside windows or the .NET frameworks?
I would like to get the index of the current row at the PreRender event. Protected Sub GridView1_PreRender(sender As Object, e As System.EventArgs) Handles GridView1.PreRender Dim idx as integer =... End Sub
How can I do some code when the user changes what line the caret is on? So something like: sub textbox1_lineindexchanged (byval ....) Handles Textbox1.Lineindexchanged 'do code based on the current line end sub I am using a richtextbox, just I always used it so I just call it a textbox.