So basically I have a ComboBox on a form, which I populated by adding custom object named "Category" and by setting the DisplayMember to the property "Name" of my object.On another form that can be opened at the same time, I can edit the name of theses "Category" objects. I raise an Event, "NameChanged" but how can I catch it on the form which contains the ComboBox? Even if the property "Name" of the object "Category" change, the display on the ComboBox doesn't autoupdate. So I need to catch the event, but I don't know how to do it.
i have problem when i click a ADD button, there is one null value in the textbox .. so the try catch statemnt is to catch that null value error but after that the catch is success but the button click never stop excute the statemnt till the end of the button event.
Well the title pretty well describes my problem. Here is a little bit more detailed description of my problem: I am building an application with a TabControl, which I populate at execution time with TabPages. In my first version of the code, these TabPages were filled with a children ListView. The ListView was also created in code, using AddHandlers to link it to the DragEnter and DragDrop routines. Everything worked very well... Now as I need some other controls on every TabPage, instead of creating every single control in code, I have created a UserControl containing a ListView and a few Buttons, which I instantiate for every new TabPage. The problem now is that the DragDrop event is not raised anymore
I have a (begginner) question on VB.NET. Is this good code (I mean, is it "bullet proof")?. It seems to work, but I understand the Return is executed AFTER the Finally. So how does it call a method on an allready disposed of object?
One of the things I loved about VB6 is that you had the ability to tell the development environment to break on all errors regardless of what error handling you had set up. Is it possible to do the same thing in VS2008 so that the debugger will stop on any error even if it happens inside a try-catch statement?
I'm getting 'Catch' cannot catch type 'Object' because it is not 'System.Exception' or a class that inherits from 'System.Exception'. and 'Expression detected' Code underlined in blue: Catch obj1 As Object When (?)
I was searching the most effective and elegant way do to the follows:
My function can be called while Filename is valid, corrupted, not exist
The function will just deserialize an XML object.
The main possible results are:
OK File doesn't exist Error in XML file
If I write this way, the reader won't be closed in case of corrupted file. IF I write the reader.close() inside finally block, It gaves me a warning about using read before assigning it a value.
So, how can I solve this inside the sub?
Public Function DeSerializzaXML(ByVal FileName As String, ByRef tmpObj As Object, ByVal tmpClass As Type) As Boolean Dim serializer As XmlSerializer Dim reader As StreamReader
I want catch control + C system Event through by VB.Net means i devolped one project in VB.NET. In my project one search textbox if my project is minized and some word or else document opened and if user press control + C system event do then my minimized project open and selected word (means those word you select ) see in my search textbox.
How do I catch the new added datarow event? I'm using a dataset and bindingsource. I've tested Bindingsource's ListChanged event but it is a bit problematic. For example when I use those codes in the ListChanged event:
If e.ListChangedType = System.ComponentModel.ListChangedType.ItemAdded Then MessageBox.Show("Record was added..." End If
... records are added twice. If there is an another event for it?
I just want to know if there any equivalent event (ADO. NET VS 2008) event as in MS ACCESS Form's OnCurrent Event.The reason is I like to make some calculations based on some data bound controls with current datarow data when user clicked a row in DataGridView (or by using bindingNavigator). I've tried with DatagridView's RowEnter event. But some Data bound controls are not yet reflect the data of current datarow when that evet was fired.
I have a DataList inside another DataList. I want to access the child DataList "dlQuestion" events, ItemDataBound event. Also, I'm tring to find the control LableControl "lblQuestion" in the child datalist. How do I do that? Here's the mark-up:
a) If the function returns true OR false will utilising the 'Using/End Using connection' statement close the connection cleanly? b) Is the 'Return TRUE statement' suitable placed to allow an error to occur and be raised returning a value of FALSE?
Public function doSomething () as boolean Using conn As New SqlConnection(My.Settings.SQLConn) Try
I'm trying to extend my new WPF Touch Screen Keyboard (DLL) Library, to allow the user to get events from the Touch Screen Object. I'd like to be able to tell the Programmer what Object made the call (or executed the subroutine) that raised the event. Not dissimilar to the Sender as Object event parameters one gets when working with a System Object. Which begs the question, How do I get that information, if I don't ask for it?Is there a way to get this information from some call made in the subroutine about to raise the event?
I'm trying to extend my new WPF Touch Screen Keyboard (DLL) Library, to allow the user to get events from the Touch Screen Object. I'd like to be able to tell the Programmer what Object made the call (or executed the subroutine) that raised the event. Not dissimilar to the Sender as Object event parameters one gets when working with a System Object. Which begs the question, How do I get that information, if I don't ask for it? Is there a way to get this information from some call made in the subroutine about to raise the event? That would be nice, and a time saver for me.
How can I catch an exception thrown by a control event?I have a control that throws an exception in one of its events and I need to catch it but I don't know how.Consider for example that the text box control throws an exception in its click event. How can I catch such exception?
I want to move certain controls on a form when the webbrowesr controls' vertical scroll bar is scrolled. but there is no scroll event defined for the webbrowser control in .NET I am using Visual studio 2008 and VB.net.
A developer has created a custom control in ASP.NET using VB.NET. The custom control uses a repeater. In certain scenarios, the rpt_ItemDataBound event is encountering a data error. My goal is rather than having the user see the yellow screen of death, give the user a friendlier error explaining exactly what the data error is. I figured I would be able to use a Try/Catch block as shown below throw the exception, however, it appears that the event has nowhere to be thrown to and stops executing at the "End Try" line.
Protected Sub rpt_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles rpt1.ItemDataBound, rpt2.ItemDataBound Try ProcessBadData... Catch ex As Exception Throw ex End Try End Sub
In VB.NET, I can find where the repeater's DataSource is being set, however, I can not find a DataBind event. How I can capture the exception in this ASCX control so I can report it to the user. The stack trace looks like this. There is another repeater within the repeater that is actually causing the error (rptOther) and I'm able to catch the error, but I can only throw it to the rpt_ItemDataBound. How rpt_ItemDataBound is getting called without a DataBind event.
at Company.WebForms.Control.rptOther_ItemDataBound(Object sender, RepeaterItemEventArgs e) at System.Web.UI.WebControls.Repeater.OnItemDataBound(RepeaterItemEventArgs e) at System.Web.UI.WebControls.Repeater.CreateItem(Int32 itemIndex, ListItemType itemType, Boolean dataBind, Object dataItem) at System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) at System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) at System.Web.UI.WebControls.Repeater.DataBind() at Company.WebForms.Control.rpt_ItemDataBound(Object sender, RepeaterItemEventArgs e)
I have a button on a web page that I just need a little help with some extra code. I think I need a TRY, CATCH statement?, this is what I have so far: I have a simple web page that has a button which at the moment when pressed enables the user to add data to a DB table via a stored procedure.Once this button is pressed a pop up message box is displayed to let the user know the data has been passed. The user then needs to press the 'OK' button within this message box which then directs them to the home page of the site. This works fine.
The code for this is here:
Protected Sub btnAddRawData_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnAddRawData.Click 'database conn, this is linked to the web config file .AppSettings Using dbconnection As New SqlConnection(ConfigurationManager.AppSettings("dbconnection"))
[code]....
As I don't want the user to enter duplicate records in the database (This could be done by the user navigating back to the page where the btnAddRawData_Click is located and pressing it again.), I have created a UNIQUE INDEX named 'DupRecords' to stop the user from commiting this data more than once that day.When I run the web page now I get the following message in my browser:
Cannot insert duplicate key row in object 'dbo.GasRawData' with unique index 'DupRecords'.The statement has been terminated.The solution I think, is to add a TRY, CATCH statement into the btnAddRawData_Click code.
i want to automatically add all the events of the activeform under try catch block.i am using a simple code which puts the selected code of ActiveDocument under try catch ( using DTE.ActiveDocument.Selection )i have to manually select each event's code and apply the macro, which does not seems to be a very good idea.
I was wondering i have a try block setup but need to catch an object exists error so I can continue in my code and ignore that user because she/he exists already in another ou.Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to[url]...
I have a User Control. In this user control I have a Repeater. In this repeater I have again a User Control. If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired. Is there a way to catch this event?
Some code:
first user control:
[CODE]..........
In myUserControl:
[CODE]..........
This event isn't firing:
[CODE]..............
Also the following does not work because it returns nothing:
I setup a strongly typed dataset using the DatasetDesigner in VB2010. I am using the TableAdapter.Insert method to add data to an Access table. Before the data is inserted I need to validate the data using the DataTable RowChanging event.
How can I get the DataTable RowChanging event to fire when using the TableAdapter.Insert method?
Here is an excerpt of code I have so far:
When the Insert method runs, it does not fire the datatable RowChanging or NewRow events.
i have a User Control.In this user control I have a Repeater.In this repeater I have again a User Control.If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired.
I am using Visual Studio 2008 and VB.NET. I've got a listview control on my form and I've added columns using the windows forms designer. As you know, if you double-click on the sizer or divider or whatever you want to call it between two columns, the column on the left will autosize (unless you disable that). How can I catch this specific event? The ColumnWidthChanged event and the DoubleClick event are likely candidates, but in the ColumnWidthChanged event, there's no way I can see to determine if it was an autosize. Similarly, there's no simple way to catch what was clicked exactly with the DoubleClick event. how I can catch this specific event type?
