How do I catch the new added datarow event? I'm using a dataset and bindingsource. I've tested Bindingsource's ListChanged event but it is a bit problematic. For example when I use those codes in the ListChanged event:
If e.ListChangedType = System.ComponentModel.ListChangedType.ItemAdded Then
MessageBox.Show("Record was added..."
End If
... records are added twice. If there is an another event for it?
i have problem when i click a ADD button, there is one null value in the textbox .. so the try catch statemnt is to catch that null value error but after that the catch is success but the button click never stop excute the statemnt till the end of the button event.
When a user clicks on the add button I do this:-oledrTest = oledstest.tables(0).newrowOn the save I need to know whether they have clicked on the add button or the edit button. In the passed I have set a variable to 1 for add and 2 for edit and on the save if its a 1 I do oledstest.tables(0).add(oledrtest).
i have multiple forms in a project and all have statusbar. there is no way to add textbox on status bar but in my previous thread i got the help to add the text box. i created a function in module so that i call that function from all the forms on load and add the textbox on status bar and also add the event on textchange. the function to be called on event change is in individual form (at present)[code]
I have a DataGridView that uses a BindingSource to display my underlying DataTable. When the user makes a change to a row in the DataGridView the BindingSource's DataBindingComplete event fires. I'd like to get the DataTable's DataRow that caused this event. How do I do this?
The code below does not return the correct DataRow. For example, when I Fill my DataTable then change row 200 the Current property still equals 0, which always returns the first row in my DataTable.
Private Sub dgvCurrent_DataBindingComplete(ByVal sender As Object, ByVal e As DataGridViewBindingCompleteEventArgs) Handles dgvCurrent.DataBindingComplete If e.ListChangedType = System.ComponentModel.ListChangedType.ItemChanged
I want catch control + C system Event through by VB.Net means i devolped one project in VB.NET. In my project one search textbox if my project is minized and some word or else document opened and if user press control + C system event do then my minimized project open and selected word (means those word you select ) see in my search textbox.
I just want to know if there any equivalent event (ADO. NET VS 2008) event as in MS ACCESS Form's OnCurrent Event.The reason is I like to make some calculations based on some data bound controls with current datarow data when user clicked a row in DataGridView (or by using bindingNavigator). I've tried with DatagridView's RowEnter event. But some Data bound controls are not yet reflect the data of current datarow when that evet was fired.
How can I catch an exception thrown by a control event?I have a control that throws an exception in one of its events and I need to catch it but I don't know how.Consider for example that the text box control throws an exception in its click event. How can I catch such exception?
So basically I have a ComboBox on a form, which I populated by adding custom object named "Category" and by setting the DisplayMember to the property "Name" of my object.On another form that can be opened at the same time, I can edit the name of theses "Category" objects. I raise an Event, "NameChanged" but how can I catch it on the form which contains the ComboBox? Even if the property "Name" of the object "Category" change, the display on the ComboBox doesn't autoupdate. So I need to catch the event, but I don't know how to do it.
I want to move certain controls on a form when the webbrowesr controls' vertical scroll bar is scrolled. but there is no scroll event defined for the webbrowser control in .NET I am using Visual studio 2008 and VB.net.
A developer has created a custom control in ASP.NET using VB.NET. The custom control uses a repeater. In certain scenarios, the rpt_ItemDataBound event is encountering a data error. My goal is rather than having the user see the yellow screen of death, give the user a friendlier error explaining exactly what the data error is. I figured I would be able to use a Try/Catch block as shown below throw the exception, however, it appears that the event has nowhere to be thrown to and stops executing at the "End Try" line.
Protected Sub rpt_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles rpt1.ItemDataBound, rpt2.ItemDataBound Try ProcessBadData... Catch ex As Exception Throw ex End Try End Sub
In VB.NET, I can find where the repeater's DataSource is being set, however, I can not find a DataBind event. How I can capture the exception in this ASCX control so I can report it to the user. The stack trace looks like this. There is another repeater within the repeater that is actually causing the error (rptOther) and I'm able to catch the error, but I can only throw it to the rpt_ItemDataBound. How rpt_ItemDataBound is getting called without a DataBind event.
at Company.WebForms.Control.rptOther_ItemDataBound(Object sender, RepeaterItemEventArgs e) at System.Web.UI.WebControls.Repeater.OnItemDataBound(RepeaterItemEventArgs e) at System.Web.UI.WebControls.Repeater.CreateItem(Int32 itemIndex, ListItemType itemType, Boolean dataBind, Object dataItem) at System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) at System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) at System.Web.UI.WebControls.Repeater.DataBind() at Company.WebForms.Control.rpt_ItemDataBound(Object sender, RepeaterItemEventArgs e)
I have a button on a web page that I just need a little help with some extra code. I think I need a TRY, CATCH statement?, this is what I have so far: I have a simple web page that has a button which at the moment when pressed enables the user to add data to a DB table via a stored procedure.Once this button is pressed a pop up message box is displayed to let the user know the data has been passed. The user then needs to press the 'OK' button within this message box which then directs them to the home page of the site. This works fine.
The code for this is here:
Protected Sub btnAddRawData_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnAddRawData.Click 'database conn, this is linked to the web config file .AppSettings Using dbconnection As New SqlConnection(ConfigurationManager.AppSettings("dbconnection"))
[code]....
As I don't want the user to enter duplicate records in the database (This could be done by the user navigating back to the page where the btnAddRawData_Click is located and pressing it again.), I have created a UNIQUE INDEX named 'DupRecords' to stop the user from commiting this data more than once that day.When I run the web page now I get the following message in my browser:
Cannot insert duplicate key row in object 'dbo.GasRawData' with unique index 'DupRecords'.The statement has been terminated.The solution I think, is to add a TRY, CATCH statement into the btnAddRawData_Click code.
i want to automatically add all the events of the activeform under try catch block.i am using a simple code which puts the selected code of ActiveDocument under try catch ( using DTE.ActiveDocument.Selection )i have to manually select each event's code and apply the macro, which does not seems to be a very good idea.
I have a User Control. In this user control I have a Repeater. In this repeater I have again a User Control. If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired. Is there a way to catch this event?
Some code:
first user control:
[CODE]..........
In myUserControl:
[CODE]..........
This event isn't firing:
[CODE]..............
Also the following does not work because it returns nothing:
I setup a strongly typed dataset using the DatasetDesigner in VB2010. I am using the TableAdapter.Insert method to add data to an Access table. Before the data is inserted I need to validate the data using the DataTable RowChanging event.
How can I get the DataTable RowChanging event to fire when using the TableAdapter.Insert method?
Here is an excerpt of code I have so far:
When the Insert method runs, it does not fire the datatable RowChanging or NewRow events.
i have a User Control.In this user control I have a Repeater.In this repeater I have again a User Control.If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired.
I am using Visual Studio 2008 and VB.NET. I've got a listview control on my form and I've added columns using the windows forms designer. As you know, if you double-click on the sizer or divider or whatever you want to call it between two columns, the column on the left will autosize (unless you disable that). How can I catch this specific event? The ColumnWidthChanged event and the DoubleClick event are likely candidates, but in the ColumnWidthChanged event, there's no way I can see to determine if it was an autosize. Similarly, there's no simple way to catch what was clicked exactly with the DoubleClick event. how I can catch this specific event type?
How do I add an event Handler to a control, for example a textbox, to handle any keypress event?cause I want this textbox(which is added in program runtime) to only accept any convert any small letter to Upper case.
I'm adding multiple combobox controls to a form dynamically, but am having a problem with one of the event handlers. The first event handler I've added (for the Leave event) fires, but the second (for the TextChanged event) does not. I've tried reversing the order when adding the handlers and I get the same results (TextChanged does not fire). Here's a code snippet for adding the controls, and the code for the events. I've added a breakpoint while testing to verify - but it never hits the code.
Dim cbo As New ComboBox cbo.Name = "cbo" & fldName cbo.Tag = fldName.ToUpper cbo.Top = rowtop cbo.TabIndex = tabOrder cbo.DropDownStyle = ComboBoxStyle.DropDown [Code] .....
I'm creating an online exam page with 30 radiobuttons that are created dynamically at runtime. How will I get the click event of each radiobutton and tag it in my method that I will check if the next question is need to be jump or escape. Example: If I'm in question 10 and answer = "Yes", redirect me to Question 15, else go to the next question
I do a lot of programming in VS 2010 on my Windows XP Pro PC. Recently I tried testing my software on a Windows 7 Home PC. For some reason, all of the controls on my forms are slightly misplaced. I also get a bunch of unhandled exceptions I don't get on my pc. For example, one exception said it couldn't access a registry key. Another said it couldn't find the part of a path (it didnt specify which path). What's up? Why is it doing this? My Win XP PC tricks me into thinking my apps are bug free. Guess not.
just want to ask help in terms of adding new menu item onclick event on an existing menu item. I have a window menu (handles all open window forms in the Parent) once a new window opens i used this [Code] but i need also to add an onlick event on all the forms being added, so when they click that sub menu it will open the form selected. My question is how can i add an onclick event for this newly added menu item?
I'm creating a small game which when the user clicking a menustrip item "New game" adds event handlers to each label in a panel control.
For Each scoreLabel As Label In Me.panelScore.Controls If Not (scoreLabel.Name = "lblLeftBonus" Or scoreLabel.Name = "lblLeftTotal" _ Or scoreLabel.Name = "lblRightBonus" Or scoreLabel.Name = "lblRightTotal") Then