LINQ - Using "Build A Program Now" Ebook - Error "The Method Or Operation Is Not Implemented"

Jun 12, 2009

I am new to Visual Basic 2008 and NET and am using the Visual Studio 2008 Express editions. I recently downloaded the ebook "Build a Program Now!" for VB and have been working through it without problem until te end of the penultimate chapter 8.

Part of the exercise includes the following code:

Private Sub tsbFilterByMake_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles tsbFilterByMake.Click
Dim filteredByMake = From Listing In Me.CarTrackerDataSet.Listing _

[CODE].........

Whenever I attempt to execute this code, I get the error "The method or operation is not implemented" on the last line before the End Sub. This suprised me because when I typed in the f after the = sign, Intellisense offered me the single choice of the required filteredByMake, suggesting to me (in my probable naivety) that it recognised it as a syntactically corrrect choice. This is not down to an error on my part somewhere in attempting the exercise as I get the same result trying to run the Complete code solution that accompanies the book. I have successfully replaced this and a similar Sub with SQL queries on the datasets in question, why the above code does not work and what can be done to correct it.

View 8 Replies


ADVERTISEMENT

INotifyPropertyChanged.PropertyChanged Implemented And Not Implemented; Visual Studio Build Error

Jan 2, 2012

I'm seeing a strange build bug a lot. Sometimes after typing some code we receive the following build error.

Class 'clsX' must implement 'Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs)' for interface System.ComponentModel.INotifyPropertyChanged'.

And

'PropertyChanged' cannot implement 'PropertyChanged' because there is no matching event on interface 'System.ComponentModel.INotifyPropertyChanged'.

Those error should never go together! Usually we can just ignore the exception and build the solution but often enough this bug stops our build. (this happens a lot using Edit and Continue which is annoying)Removing the PropertyChanged event and retyping the same code! sometimes fixes this.We're using a code generator that causes this error to surface but just editing some files manually triggers this exception too. This error occur's on multiple machines using various setups.

View 4 Replies

.show Method Or Operation Is Not Implemented?

Jul 18, 2012

I am programming an ordering site in VB.Net and ASP.Net.I start with the main ordering form and the idea is that the user will select a subject from the drop down list and then click a button to retrieve all modules associated with that subject in a second form (smaller than the main order form).I have created the second form (frm2) and added content to it.In the main form inside the method which represents the button being clicked, I have coded the following:

Dim frm As New frm2()
frm.show()

I then get an error that show has not been declared and so I create a method stub for it.I run the program and when I click on the button I get the following error:'method or operation is not implemented.'This points to the following line in the 2nd form:

Sub show()
Throw New NotImplementedException
End Sub

what I need to put inside this method to make my second form load when the button is clicked?

View 10 Replies

VS 2008 IPodServiceLib - Method Or Operation Is Not Implemented?

Jun 23, 2009

im messing around with this trying to get into my ipod touch the code i found here and there on the net doesnt quite work..Imports IpodServiceLib

Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

[Code]...

View 18 Replies

Asp.net - Error: Method 'First' Can Only Be Used As A Final Query Operation?

Mar 16, 2011

I have the following query:

Dim roommates = From p In dbroom.Residents _
Where p.room = queryStudent.First.r.id _
Where p.building = queryStudent.First.b.id _[co
de].....

But I still get the same error: The method 'First' can only be used as a final query operation. Consider using the method 'FirstOrDefault' in this instance instead.

View 1 Replies

Why Is The VBCodeProvider.Parse Method In VS2005 Not Implemented

Mar 17, 2011

Why is the VBCodeProvider.Parse method in VS2005 not implemented? Is there an equivalent function?

View 2 Replies

Ebook Program Develop In VB

May 3, 2011

As I need a program to develop an ebook, I wrote one. But perhaps I am re-inventing the wheel. Does such a program already exist in visual basic, that is to say is it available in the forums? If not I am willing to upload it.

View 16 Replies

"Method Not Implemented" - Curve Clear?

Jul 17, 2010

I have two forms, a main display form with a Zedgraph Pane on it and a second form with a single ComboBox control, opened by a button click on the first form and having its ComboBox filled by the Labels of the curves currently being shown by the Zedgraph pane.The code below seeks to remove the curve selected in the ComboBox by clearing its points, but on the CurveList.Clear line, I always get a "Method not Implemented" error.

Private Sub rmvCurve(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chnlSelectRmv.SelectedIndexChanged
Dim curLabel As String

[code].....

View 14 Replies

.Net Linq - Doing Operation On The Subset

Jun 16, 2010

I need to have the following : (name1 + "a") + (name2 + "a") + ...

Dim separator() As String = {"|"}
myString.Split(separator, StringSplitOptions.None).SomeLinq(...)

I don't know what to add at the end to add an "a" to each element...

View 2 Replies

C# - Use LINQ And Build A .Net App Rapidly?

Jul 22, 2010

I am looking for a tool that would allow me to use LINQ and build a .Net app rapidly.

View 3 Replies

LINQ To SQL Generic Class For Insert And Delete Operation?

Nov 27, 2009

I have been writing same code for insert, update, delete with LINQ over and over again. I want to have some sort of generic function for Insert, Update, Delete operation. I read a post here like the following :

public static void Insert<T>(T entity) where T : class
{
using (OrcasDB database = new OrcasDB())

[code].....

View 2 Replies

Build A String From A Collection With Linq?

Oct 8, 2009

I'm building flat file content from collections of strings.

Example collection: A, B, C, D, E, etc.

I want to be able to output these values to a string with line feeds in one swoop with Linq if possible.[cod]e...

View 8 Replies

Callback Method - Cross Thread Operation Not Valid Exception?

Jul 28, 2009

I have a windows form that gets data from a scale via the serial port. Since I need the operator to be able to cancel the process I do the get data process on a second thread. The data collection process gets multiple readings from the scale one at a time. The form has a label that needs to be updated with information specific to each reading.

I call the method to get the data from the scale with this code.
Dim ad As New readALine(AddressOf thisScale.readALine)
Dim ac As New AsyncCallback(AddressOf Me.GetDataCallback)
Dim iar As IAsyncResult = ad.BeginInvoke("", ac, ad)

The delegate for the readALine method is defined in the UI code.
Delegate Function readALine(ByVal toSend As String) As String

The GetDataCallback method:
Private Sub GetDataCallback(ByVal ia As IAsyncResult)
.
.
.
lblInstructions.Text = _thisMeasure.dt.Rows(_currRow - 1).Item("cnt") & ":"
lblInstructions.Refresh()
.
.
.
End Sub

I get the exception on the "lblInstructions.Text =" statement. I thought the GetDataCallback method was part of the UI thread so don't understand why I'm getting the exception. I know this could probably be rewritten using a BackgroundWorker and it's appropriate events but for now would like to understand why this isn't working as expected. The application was written originally in VS2003 and just recently upgraded to VS2008.

View 5 Replies

.net - VerificationException Operation Could Destabilize The Runtime On Simple LINQ Query

Jun 11, 2009

The code below works fine on my development PC, but when I deployed the app, it crashes.

Here is the lines of code that are relvant

Private TdsTypesList As List(Of TDS_Type)
...
TdsTypesList = (From tt In db.TDS_Types Select tt).ToList

[Code].....

I have many queries that are using linq, and none of them throw any errors. The set of data is not very large either, less that 100 rows. I dont know if I have any other queries that do not have where statements in them that work.

Running .net 3.5 without sp1 on the client machine, although I am running sp1 on my development PC. looking for a solution that doesn't require sp1 to be installed.

Edit Code breaks on the second line when remote debugging.

I looked over [URL] and tried the following, with the same error.

TdsTypesList = tl.OfType(Of TDS_Type)().ToList

I finally found a dirty workaround. Instead of pulling all of columns from that table, I was able to re-write the query to omit 1 column. This returns an object of anonymous type, and I can use that object. I still would like to know what causes this though.

View 1 Replies

How To Build Asynchronous Decrypt / Encrypt Method

May 28, 2010

I need to build an an asynchronous encrypt/decrypt method but I don't know where to begin. I have only one requirement. I need to get a serial number like output for example:
ABC12-EFG45-POI98-KJUH8-KJSAK
I need to build a minimalistic licensing algorithm, where I want to create a serial number based on a salt, username, machinename etc.
My Sharepoint Blog [URL]

View 1 Replies

How To Build A LINQ Where Source Is Made Of Different Lists

Jul 4, 2011

Suppose that I have more than one List (L1,L2,L3,L4) of instances of a class [code]Now I want to querry the 4 lists with one call like Dim L= (from P as MyClass in (L1,L2,L3,L4) where p.Datetime> XXXXX order by p.datetime select p).tolist..is it possible to do something like that? I Know that I could do a FOR NEXT loop with each list but i am looking for a way to do this with a single call

View 2 Replies

Error With AddEclippse - The Error Is: Cross-thread Operation Not Valid?

May 5, 2012

I am having a problem that I keep getting the following error when I try to run my program.I am trying to make a circle the size of the value of FrameSize.A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll

This is the details of the error:

System.InvalidOperationException was unhandled

Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control '' accessed from a thread other than the thread it was created on.
Source=DreamCatcher[code]......

View 3 Replies

ERROR: Unrecoverable Build Error When Building Setup Project In VS.Net 2005

Nov 8, 2005

I got "Unrecoverable build error" when building setup project.I try the solution in [URL].. but did not work out.

View 1 Replies

Error: Statement Cannot Appear Within A Method Body. End Of Method Assumed

Jul 13, 2011

Why does my the declaration of my string in the code result in the following error? Is there a workaround?

Code:

<script runat="server">
Protected Sub form1_Load(sender As Object, e As System.EventArgs)
Dim x As String = "</script>"

[code]....

Error: Statement cannot appear within a method body. End of method assumed.

Note: The following page did not fix my issue and instead resulted in the string </script> being output in my page. ( VB.NET hates </script> tag in string literal )

View 1 Replies

Optimize Linq Contains Method

Apr 1, 2012

I need a list from OldGuids that are not in the NewGuids, so I used the Contains method, the problem is that it is already running more then half hour, is there a faster way? or how much longer would it take about? [code]

View 2 Replies

Error - LINQ To Entities Does Not Recognize The Method 'System.Object IIf(Boolean, System.Object, System.Object)'

Jul 29, 2011

I am getting following error whenever I want to use IIf function inside entity framework query.

LINQ to Entities does not recognize the method 'System.Object IIf(Boolean, System.Object, System.Object)' method, and this method cannot be translated into a store expression.

View 1 Replies

Build Error But No Errors In The Error List?

Sep 18, 2009

Is there a way to find what the error is?

View 5 Replies

How To Create EBook With TreeView

Apr 23, 2010

I want to create an Ebook with a treeview on the left and a textbox on the right so that when the user click the treeview node the corresponding page displays in the textbox and I want the user to be able to edit the text in the textbox can anyone tell me how to associate the pages with the treeview nodes, and how to save changes made in text by the user in run time.

View 7 Replies

Need To Do Ebook Management Sytem

Mar 10, 2011

i want to to create a ebook management system in VB. This is for my university purposes, i dont have any idea about VB.net, so kindly i ask you to give any tutorial link. And these all should be in the project. The main thing is i want to know simple ways to work with databases. So kindly give some links for these, or even the project source code.

View 1 Replies

Output Text As GIF Or PNG For Use In EBook

Feb 26, 2009

My goal is to create an eBook that I can read with the Mobipocket reader on my Blackberry. The problem is that my text includes UTF-8 characters which are not supported on the Blackberry, and therefore display as black boxes. The eBook will contain a list of English and Punjabi words for reference, such as:[code]One thought I had was to write the list to an HTML table with the Punjabi converted into a GIF or PNG file. Then include this HTML file in the eBook. All of the words currently exist in an access database, but could easily be exported to another form for input to the generation routines.Using VB, VBA or C#, how hard would it be to write a routine create the images and then output an HTML file containing the English words and images in a table

View 2 Replies

Linq To Object - Method Not Found?

Nov 11, 2010

I am trying to use a simple LINQ to Objects query.When I try to run my application I get the message:

System.InvalidOperationException was unhandled Message="An error occurred creating the form. See Exception.InnerException for details. The error is: Method not found: 'Void sharatTashlumimWS.paymentDetailsManager.set_ReleaseDate(System.DateTime)'."
Source="WindowsApplication1"
StackTrace:

[Code]...

View 2 Replies

Get Free VB 2005 EBook From Microsoft?

Apr 12, 2006

QuoteGet a focused, first look at the features and capabilities in Microsoft Visual Basic 2005, Visual Studio 2005, and the .NET Framework 2.0. If you currently work with Visual Basic 6, these authors fully understand the adoption and code migration issues you'll encounter. They'll step you through a quick primer on .NET Framework programming, offering guidance for a productive transition. If you already work with .NET, you'll jump directly into what's new, learning how to extend your existing skills. From the innovations in rapid application development, debugging, and deployment, to new data access, desktop, and Web programming capabilities, you get the insights and code walkthroughs you need to be productive right away.

View 14 Replies

.net - LINQ Dynamic Method Call Using Expressions?

May 3, 2011

I'm trying to implement multicolumn filtering using LINQ expressions in a class that extends BindingList(Of T). Here is the relevant code:

Public Function GetFilterPredicate() As Func(Of T, Boolean)
Dim expressionList As List(Of Expression) = New List(Of Expression)
For Each item as FilterInfo in _FilterList

[code]....

However, an exception is thrown at the Expression.Call statement. I can't quite figure out the right arguments to supply. As it is now, I am getting this error when I run the code:

InvalidOperationException was unhandled:No generic method 'Equal' on type 'System.Linq.Expressions.Expression' is compatible with the supplied type arguments and arguments. No type arguments should be provided if the method is non-generic.

View 1 Replies

Linq - Write Lambda Select Method In .net?

May 22, 2012

For I've tried this:Dim exampleItems As Dictionary(Of String, String) = New Dictionary(Of String, String)
Dim blah = exampleItems.Select (Function(x) New (x.Key, x.Value)).ToList 'error here

But I'm getting a syntax error and all the examples that I've seen are in C#.

View 1 Replies

The Method 'X' Is Not A Property Accessor (Linq / LinqToSql)

Feb 15, 2011

I'm using LinqToSql classes in an ASP.NET website and let's say I have an entity named Testimonials. Two pages utilize this type - the first being a list of all existing Testimonial records and the second being an add / editor with which to manage the records. [Code] This allows population a DataGrid with the returned items, however on the add / editor page we alter the query ever so slightly: [Code] This query dies, prior to even trying to populate anything, with the following message: [Code]

I have pretty much identical methods for other data objects which have been and still are executing just fine. One immediate difference I can think of is that this table has been recently updated in the database, removed from the dbml designer and re-added to the dbml designer. None of the other tables have undergone this process for some time. [Code] Why is this exception occurring and how can I configure my project appropriately to correct the issue?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved