I've created an MDI application, on which I launch a macro using a tool bar button. The Sub is located in a module and I don't manage to udpate ToolStripStatusLabel from that sub.My MDI form is called "MDIParentMain"and I use the following code to make changes on oolStripStatusLabel (called "statuslabelMDIProgressbar"):
Sb test
Dim myform As MDIParentMain
[code].....
I'm trying to edit the text of a toolstripstatuslabel from a module in my project, but whatever I do, I can't change it. [code]But that didn't work either.I tried to change If Me.StatusStrip1.InvokeRequired Then to If Me.InvokeRequired Then, but that didn't help either. I also tried to change the modifiers property of the toolstripstatuslabel to public, with no result.
View 4 RepliesI have a situation where I have several VB.NET Modules in the same Logical-Module of a large application. I would like the update function of each module to be public, but I would like users to be forced to qualify the function call with the module name.
ModuleName.Update()
instead of
Update()
Is this possible?
My application has a total of 1 form. I have several modules, one of which is a module that handles a background worker dynamically. But what I need to be able to do is update a textbox from the background worker thread. Again, this code is contained within a module, not directly on the main form, so I am totally clueless as to how to make a reference to it. It's easy in WinForms, but I can't for the life of me figure out how to do it in WPF...
View 4 RepliesI'm at a complete loss here, its probably me being stupid and missing something simple but i don't appear to be able to update a testbox (CreditInfo) on Form1 from a module (SerialData). It doesn't give any errors, it just doesn't work. If i put a Button on Form1 to update the testbox(CreditInfo) it works... however i need it to be automatic.. Dave
[Code]...
I have a Main Module that loads a form. I want to update text on a Label, my code is:
Public mFormSplash As Form = New FormSplash
Sub Main
With mFormSplash[code]....
The code loads the form OK but does not update the Label's text (LabelStatus)I am getting an error Error:
'LabelStatus' is not a member of 'System.Windows.Forms.Form'.
This worked ok on a previous project and I can't work out what is different.
Currently, I am copying files via a for loop. Each time a file copies, I increment a progress bar that is housed in the ToolStrip. This works. What doesn't work is updating the text of a label each time a file copies.
View 5 Replieswhy my ToolStripStatusLabel does not become visible when i run this code
But does become visible if I place it at top of code before openfiledialog?
Will Not Become Visible
Private Sub OpenToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenToolStripMenuItem.Click
OpenFileDialog1.InitialDirectory = "c:"
[Code].....
Forms :: ToolStripStatusLabel and threading
View 7 Replieshow to apply the code in the module?
this is my code:
sqlstr = "update StudentGraduateTable set LastName ='" & txtlastname.Text & "'," _
& "FirstName ='" & txtfirstname.Text & "'," _
& "MiddleName ='" & txtmiddlename.Text & "'," _
[code]....
i am in the process of developing a school project(Restaurant management system) I am adding misc tools and modules to it and i need code for the email sending module i.e. just one which sends an email to a specified address. [Code]
View 3 RepliesI have to call PS commands from a VB.NET program. This works fine if I'm calling standard PS commands, but if I have to call a command that lives in a 3rd party module I can't seem to make it work. At the PS console I can type Import-Module MyModule and then I can call the commands in that module. I tried the following but it doesn't work, I still can't access my command from within the module:
Dim PowerShell As Management.Automation.PowerShell = PowerShell.Create()
Dim PowerShellCommand As New PSCommand()
Dim PowerShellCommandResults As Object
[code].....
I have an array of picture boxes with images. I want the status bar to change when the mouse enters the image. I am stuck on displaying the correct text when the mouse is over a pictureBox.
hr1StatusText is an array of text read from a text file. Everything works but I can't figure how to iterate through the text for the status bar.
The code below works displaying the text for all PB's as long as the index is changed. What I am looking for is to display hr1StatusText(0) for PB(0), hr1StatusText(1) for PB(1), etc.
Public Sub Tile_MouseEnter(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.MouseEnter
Dim TileMouse As PictureBox = DirectCast(sender, PictureBox)
ToolStripStatusLabel1.Text = hr1StatusText(0)
End Sub
I'm trying to set the text of a ToolStripStatusLabel in a form, wich contains some ToolStripStatusLabels, a ListBox and a button. I'm setting the text from a BackgroundWorker wich is started from a timer. I thought this would be okay. Well, the problem is that sometimes it works, and suddenly after a while, I get a cross-thread error wich says:
"Cross-thread operation not valid: Control 'ListBox1' accessed from a thread other than the thread it was created on"
Well, where did the ListBox get involved in this problem? The code breaks on this line:
ToolStripStatusLabel3.Text = "Henter data fra eTime-basen..."
So, what am I missing here? I've never encountered this before in any way. I'm only using the ListBox later in my BackgrounWorker, and each time I'm using it I'm checking the InvokeRequired-property to avoid problems with threading.
My boss has asked me to set up DotNetNuke's Survey Module and make a few custom changes to it for a client. But I'm having trouble just getting the bare-bones code to run properly!Downloaded both the source & install folders from [URL] Created a new VB Web Application Project Took out all the default pages Copied the Survey source code into the VB Web Application Project in exactly the same structure Made a batch script that creates an installation folder identical to DNN's install folder (double-checked by running a folder-diff on it, and all files/folders were identical) Zipped up my installation folder using 7-zip The source code compiles perfectly. But even though the files/folders are identical, DNN's zipped package will work properly on my DNN site, and my own zipped package will fail with this famous error message:
Error: Survey is currently unavailable.
DotNetNuke.Services.Exceptions.ModuleLoadException: Could not load type 'DotNetNuke.Modules.Survey.survey'. --->
[code]....
Reasonably experienced programmer but newbie question on VB Express 2010: I have coded my 1st attempt at my project. I now want to save the work I have done and branch the code but be able to go back to what I did before if I screw up. What is the best practice? Do I get any help from Visual Studio. I could save a copy of the code in another directory or different file name
View 2 Repliescreating the DNN Survey Module from source code
View 5 RepliesI have a Excel - VBA problem that I can't seeem to get around. I have written some code to search through excel sheets and return the values it finds. The code is written in a module, and when I run it by clicking the play button at the top of the VB editor it works perfectly.
However I have noticed that I need to link it to a button (on_Click) in sheet1, I have tried copying the code into the button sub, it throws up an error: "Method 'Range' of Object '_Worksheet' Failed" When it gets to the 'UpCount' line. This piece of code steps across a worksheet and when a "y" is found it copies the values form a cell at the top of the worksheet (which uses the upcount formula as the cell to be copied changes), and then it also copies some values to the right of the cell containing the "y" value.This code all worked fine when it was ran from the module2 window using the play button a tthe top of the VB editor page, it is just now it is attached to the commandbutton I am experiancing problems!
Sorry I use ActiveCell as I don't really know how to use anything else! And being new at the coding game it helps me to 'see' what is going on..
Have a label on a form which I want to show run time status, and have a code module which stores some functions. How do I send text from code module functions to this label on form?
View 2 RepliesThere has to be a setting for this somewhere, but for the life of me I can't find it. When I "Start Debugging (F5)", if there is an issue with my code, I get a "Build Failed" notification, in the lower left of my screen. I would like to be directed to the location of the failure. So far I have been lucky and have been able to find the offending code but this is getting scary .
View 2 RepliesI was wondering if you can give me a code that will show hyperlink in toolstripstatuslabel.text when mouse over on a link.
View 1 RepliesThis code is for 2008, 2010 and later versions of VB.Net as it uses an extension method.Please note: If you are using an earlier version ( or you do not like extension methods ) please see the next post.Here is the code I posted on Monday April 30th, 2012.>>Now you can specify the startRadius to be
View 7 Replieshow we can declare a connectionstring in a module and call that module
View 1 RepliesI can access a module from code behind but not from the aspx page in inline VB code <% ... %>.
View 2 RepliesI am trying to call a public subroutine from a Windows form based on a string variable containing the name of the subroutine. The subroutine is a procedure in a code module and works fine when called by using the procedure name directly. The VB.net function CallByName should work, but I don't know how to specify the module name as the "Object Ref" parameter.
In the code shown, "ReportLibrary" is a module containing the public sub with the name contained in the string strReportProcedure.
[Code]...
What am I missing or is it just not possible to call a routine from a module using CallByName?
I have a VB.Net interface that communicates with an Access 2k3 Database using this module:
Module MOD_ENGINE
'Declare Database connections controls
Dim con As New OleDb.OleDbConnection
Dim dbProvider, dbSource As String
[code]....
I want to call EngineConnect procedure from MOD_ENGINE module into popCboBox module so I can ignate the engine!
On my program I am trying to make a ToolStripStatusLabel's text change to "connected" if connected to a network and if not connected to a network change the text to " Not Connected" then I don't know how to display a image if connected to a network or not connected. So if the computer is connected to a network I have a image that I would like to be displayed next to the ToolStripStatusLabel. And if not connected to a network, can the program display a different image? I tried this:
My.Computer.Network.IsAvailable=True(ToolStripStatusLabel2.Text "Connected")
My.Computer.Network.IsAvailable=False(ToolStripStatusLabel2.Text "Not Connected")
want this button to submit or save the changes into my database.
Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnSubmit.Click
dbConn = New SqlConnection(connString)
Dim qryUp = "Update CMScontent.Content[Content] = @Content Where ContentID = @ContentID"
dbConn = New SqlConnection(connString)
[code]....
Using VB.Net, C#.Net and SQL Server.Windows Application.I want to separate a code for 3 Tier Architecture(Presentation Layer, Data Access Layer, Business Logic Layer).
Code.
Form_Load
Dim cmd As New SqlCommand
Dim ada As New SqlDataAdapter
Dim ds As New DataSet
[code]...
Above code is working, But i want to do a same process by using 3 Tier Architecture.How to separate my code according to 3 tier Architecture.
Tell me what happen when i do following code?
SqlCommandBuilder1 = New SqlCommandBuilder(SqlDataAdapter1) SqlCommand1.CommandText = "select * from phieumuonsach " SqlDataAdapter1.InsertCommand = SqlCommandBuilder1.GetInsertCommand SqlDataAdapter1.Update(DataSet1, "phieumuon")