Main Form Changes Size After Every Build?
Jan 16, 2012
I have been given a VB project by a collegue to import into visualstudio professional to add a setup project to. The project was originally a 2003 projet I don't konw which version, VB express 2003 possibly, then imported into vb express 2008 and now professional 2010.
The problem is every time I rebuild the project without doing anything else the main form changes its size. It shrinks in height by about 40. hit build again and it shrinks again.
what this might be and can it be fixed or will I have to create a brand new project and import the source files with all the risk that that entails.
View 1 Replies
ADVERTISEMENT
Jan 1, 2011
I'm a beginner VB.Net programmer using VS 2008.I'm planning a new winform project whose main form should look more or less like this:
[Code]...
The user can either choose from the Main Menu (by clicking an item) or enter the item number in the textbox. For example, if the user clicks DoSomething3 in the Main Menu (or alternatively enters 3 in the textbox), another form will be opened and hide the main form.What would be the best way to implement it?Specifically, I would like to know how I make so that choosing from the menu and entering a number in the textbox fire the same event.
View 3 Replies
Jun 9, 2011
How to make the form size automatic setting the size equals to the screen. or Maximize the whole form including the form components.
View 3 Replies
Jun 23, 2011
Okay here's what I'm trying to do. I want to change the font size of a label based on the size of the form.If the form size is 0 through let's say 500 I want the label size to be 50. How can I write this?
View 5 Replies
Sep 24, 2009
If I have form say sized 1300 x 800, I would like to proportionally size the form to the computers screen size. I can get it to size to the screen size, but it is not proportional
View 11 Replies
Mar 5, 2010
I developed a form application on my computer, but when it was used in another computer with different screen size, i was told the form didn't fit. Do I have to adjust the form size or any other ways to let the form compatible on different screen size? (could be different screen size or wide screen)
View 2 Replies
Aug 22, 2011
So that's how I want it:
If I re-size the form, the textbox inside should be re-sized to fit the form, NOT DOCK!
View 5 Replies
Aug 5, 2010
i have my main child form open. then i show the new form:
[Code]...
but when the form opens it flickers a lot. so i want move the new form behind the main form while it loads so the user does not see the flicker. once it is done loading i will set the form to topmost. how do i move the new form behind the main form?
View 12 Replies
Sep 6, 2011
I want to to increase size/move when the form's size changes....
View 4 Replies
Aug 4, 2010
i want to make it so my toolstriptextbox will smoothly size with the form as i resize it. I tried using a timer and just say txtbox1.width = me.size.width - 100 or whatever space for the buttons and handling it for when it reaches negative numbers (with autosize off on the textbox) but its not at all smooth.
View 4 Replies
Jul 23, 2009
How can i resize the form and resize the richtextbox at the same time...(height)We know tht the difference is 18... if you look from up-to-down...u have 18 pxls of free space and everything else is the rtb... The real size:[code]
View 7 Replies
Feb 20, 2012
In my project, form_double Click and Form_Maximize is not working when i do break point. Its not Button_Click, Form_Load. I want to do like this. "My project design form grid column size is small when form load and want to be large grid column size when the form is maximize."
View 1 Replies
Nov 20, 2009
I have a tool window that I want to stay above the main application form, but not stay on top of all windows forms. Similar to the floating properties window for visual studio - it always stays on top of the main VS window, but if I select another program, like internet explorer, the floating properties window will be behind internet explorer.
What I have is an application that has several forms that may be displayed at the same time. I have a Messages form that displays messages generated by the code in the form, that gives the status of the application. Obviously, the user would not normally be working on this form, but they may want it to be visible to see the status messages from the program (File saved confirmations, etc). So, my two options right now are I can set the form to be on top of all other windows forms or, when the user clicks on the main application form, the messages form would be hidden by the main form.
View 6 Replies
Jan 29, 2010
I have a main form with datagridview containing a list of contacts:
VB
Public Class Form1
Private Db As New DataClasses1DataContext
Private Sub Form1_Load
[Code]....
After saving, I get the correct message ("Saved"), and the DataGridView in the first form gets updated in real time.
But... when I take look at the data (or close and reopen the forms) the data in the database (SQL server) have not changed! What happens!
View 4 Replies
May 15, 2012
How do i load the Main form of a WPF so that a seperate thread goes and gets data from the database while the form is in an apartmentstate? (drag-able / movable) I Know this is possible with opening a new window from your main form like this :
Private Sub openOrderWindow()
Dim OrderWindow As Orders = New Orders
OrderWindow.ShowDialog()
End Sub
[code]....
I've tried putting MyBase.ShowDialog() and .Show() and .9000+ other things The only benefit I've got out of using a seperate thread to load from the databse is i can see the screen right away (as oppose to it being a transparent box until it loads) but i cannot move it around or minimize it?is there any way to make it Movable while it loads?
View 1 Replies
Jan 2, 2010
I'd like to set the form size to the size of a textbox. The size of the textbox can differ, as it is set to auto-size. However when I use this code, which should work (as far as I know) the form just goes to 0 height and 0 width:
CODE:
View 4 Replies
Apr 29, 2011
[Code] I want like to check if a file exist on main form, if not: force open settings form. And then when the user is closing the form with exit button = check if the file exist again. If it doesn't exist, close application. It's a huge application and I need optimized on most parts. Also, the settings form is asking the closing question two times.
View 1 Replies
Jul 9, 2010
How can I make the main form grey out/translucent black when a new form opens on top?
View 8 Replies
Jun 5, 2012
i am having some trouble in my Windows form application. i have 2 forms1st Main / Parent Form2nd Sub / Child Form (Menu)
View 7 Replies
Aug 7, 2009
I'm having an interesting issue that I can't reproduce on a different project, but can consistently on this one. I have no clue what might be causing it, but am hoping that someone may have seen it before.
I have a main form, from which I run a series of checks. On this form, I have a listview control. Because of some issues with the refreshing of this listview control, I had to create my own messagebox. It's just a form that displays some text ( it also happens to look nicer than MsgBox; in my opinion, anyways ). It's been working great for months, until recently.
My problem is that on my main form's load event, I run this check, which returns an error within a try/catch block. I then call my custom messagebox with a message. It in turns calls it's ShowDialog() function.
In any other situation ( after the main form has been loaded ), I have no problems. The messagebox goes on the screen and behaves appropriately ( ie: waits for my input and acts as a modal dialog ( stops execution of my main form's thread ) ). However, on this onload event, my messagebox comes up and goes away almost immediately afterwards.
I've traced it all the way to the showdialog() call. For no explicable reason, it appears to skip right over this call, without me doing anything on the form.
Here's what the inner trace looks like ( when I put a breakpoint on the onclosing event for this messagebox form ):
CODE:
View 10 Replies
Aug 11, 2009
I have a program I've been working on for some time now and I'd like to try to streamline it somewhat. I have a main menu form that has a split panel, in the left panel is a treeview that displays forms you can open and when one is selected, it opens in a child window in the right panel. Each time I open form I called DWNForm, it does a series of dataset loads which are the populating items for a series of listviews.
What I would like to do is have these datasets load once during the mainMenu load and then have the DWNForm be able to access the datasets once it is called from the treeview selection.
View 8 Replies
Mar 22, 2011
I want to create an IMAGELIST in a main form and add to it then have it accessible within a child form. I found several MS examples on database shared access but this is NOT the concept I am after. Straight forward:
Child_Form.<function_to_execute_in_child_form>(The_Passed_Imagelist)
So, within the child form it want to do whatever I like to the IMAGELIST! I have tried passing the object by reference and anything I could think of.
View 3 Replies
Feb 3, 2010
I want to be able to check if there is currently a dialog or modal form shown for my form so that I can close it.
Is there a way to do this?
View 1 Replies
Jun 7, 2009
In the main form the user can choose to download information from a device.Since this request takes time, when "download information" is pressed I open new form in a separate thread: Private Sub RunDownload()
[Code]...
View 3 Replies
Apr 20, 2011
When I open my child form,
frm_Analogs.ShowDialog()
It opens up the new form, but now I can not interact with my main form. It will not accept focus or allow me to interact with it.
Do I need to change the form type?
View 4 Replies
Mar 25, 2010
im trying to do where the main form is a login form if the USer and password matches that in the code it goes to the main screen if it doesent it launches a form saying this user and or password is incorrect and when you click ok it closes that message window as well as the login form stop the program from launching is has to match the user and password from the text on text box one and masked textbox 1.
View 3 Replies
Dec 14, 2009
The problem is that icon on the Child Form appear in front of Menu strip control on MDI form when child form is maximised.
View 2 Replies
Feb 6, 2011
I have a MDI Parent form created with a MenuList, I also have the MDI child form created.ow do I go about using the MenuList to open the MDI child form within the parent form?
View 1 Replies
May 12, 2009
I am trying to use a progressbar to show on main form and then finish when next form is loaded, I have got this code.
1. When I click on button, it must open next form, but the next form must only open when the data in my list box has been loaded from Access Databse. When I run my program, it only shows the progressbar and don't open the next form.
Main form code:
Public Class Main
Dim PB As ProgressBar
Private Sub main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
[CODE]............................
View 4 Replies
Mar 9, 2011
For some reason I can not make my form size larger than my current windows resolution in the IDE (design time). Very irritating...Is there anyway to stop this?
View 6 Replies
