In my system each member will have an address and so do no other entity.I choosed to put address in a seperate entity but there exists two inconsistencies.
1- While the one and onlt entity which address is being used in is member, why should I consider it as an independent entity?
2- My adress fields are address 1, address 2, ...., address 6 which I think the naming convention is not good enough.
I want to merge the address feild so that instead of it being on 3 lines (like i have saved it), the form shows all of the data in 1 feild.
AT the moment i am saving it as:
Address 1 = ___
Address 2 = ____
Town = ____
ZipCode = _____
At the moment there in seperate feilds. How would i merge them to look like
Address: _____
_____
_____
_____
etc.
I am using ASP.NET with VB.NET
I have realize that SEO does not like my page URL's that contain questions marks such as this.[url]...
how to normalize data in database during connection
View 1 RepliesMy issue is to combine two paths which one or both of them may contain double dots. I used Path.Combine(string, string) and the returned string is still a long path as a result of concatenating these two paths. Single or double dots are not eliminated.
So, I tried to use Path.GetFullPath(string) method with the concatenated path as the argument.PathTooLongException is thrown because this path has more than 260 characters. However, if this path is normalized, it won't exceed the maximum characters for a file path.
[Code]...
I am trying to build a survey engine from an existing database design which is like this.
[Code]...
The line Order By Key.RecordOrder throws a null reference exception and I can understand why. Can someone advise on how to resolve this by just modifying this one query? I am fairly new to LINQ and the necessity to write this project
[Code]...
I want to update an entity without loading the entity from the database first. I've accomplished this but only by knowing all of the entities properties and then using the "attachto" method. My issues is i don't want my app to need to remember all of the properties. Example:
[Code]....
Entity Splitting: one class, two or more tables.Here is how it is done in C#, but I need to get it working in vb.net.One more thing: the class name and table columns do not match, so I have to be able to map that out, too.I have to get this to work this way because the place I'm working at right now is a vb.net only shop and the database schema is fubar, but they have so much (millions) of lines of code done directly against the database in both asp classic, vb.net, AND asp.net webforms that changing the schema right now is not realistically possible.
protected override void OnModelCreating(DbModelBuilder modelBuilder)
{
modelBuilder.Entity<Post>()
.Map(m =>
[code]....
I am trying to jump from ASP Classic to asp.net. I have followed tutorials to get Entity Framework and LINQ to connect to my test database, but I am having difficulties figuring out ExecuteQuery(). I believe the problem is that I need an "entity class" for my database, but I can't figure out how to do it. Here is my simple code:
Dim db as New TestModel.TestEntity
Dim results AS IEnumerable(OF ???) = db.ExecuteQuery(Of ???)("Select * from Table1")
From the microsoft example site, they use an entity class called Customers, but I don't understand what that means.
I am trying to create a generic typed class, but am running into a problem. Here is my basic class definition:
public class QueueObject<T> where T : System.ServiceModel.DomainServices.Client.Entity
{
public string LoadingMessage { get; set; }
public System.ServiceModel.DomainServices.Client.EntityQuery<T> Query { get; set; }
}
I am trying to add instances of this class to a queue
private Queue<QueueObject<Entity>> _queue;
this._queue.Enqueue(new QueueObject<MyEntity> {Query = MyContext.GetMyEntitiesQuery(), LoadingMessage = "Loading some stuff"});
This doesn't work. I get an error saying that QueueObject cannont be converted to QueueObject. I don't understand because MyEntity inherits from Entity.
Public Class QueueObject(Of T As System.ServiceModel.DomainServices.Client.Entity)
Public Property LoadingMessage As String
Public Property Query As System.ServiceModel.DomainServices.Client.EntityQuery(Of T)
End Class
[code]....
I'm currently refactoring an old Visual Basic DLL (VB.Net), which stores all of its data in one module called Globaldefinitions as public fields. There are about 200 fields, referenced thousands of times all around the code:
Public Module Globaldefinitons
Public a As Short
...
Public zz10 As Double
[Code]...
I need to change the module into a class with non-shared fields. This means, each and every of these thousands of references needs to reference the instance of that class:
globalDefinitionsInstance.a = 5
How do I go about this efficiently?
Regular expressions operating on the source fall flat. Refactoring tools like Re-Sharper or CodeRush don't seem to offer this functionality. Visual Studio 2010 cannot do it automatically either.
Class Foo
ReadOnly name As String
Public Sub New(name As String, dependentUpon As Foo)
Me.name = name
[code]....
The output of New Bar() is:
Dependent created. Dependent upon nothing.
Independent created. Dependent upon nothing.
It seems fields are initialized in the same order as they appear in the source code, which (a) leads to an unexpected result, and (b) seems a little puzzling, given that one is normally not permitted to read from uninitialized variables in .NET, yet that seems to be working fine above.I would've expected VB.NET to be smart enough to initialize referenced fields first, and only then those that reference it; i.e. I'd have liked to see this output instead:
Independent created. Dependent upon nothing.
Dependent created. Dependent upon Independent.
how to get VB.NET to behave like that instead, without simply having to swap the declaration order of dependent and independent inside class Bar?
I'm trying to create a table in Word using data from a table in Access. There are four fields in the access table that I need. 3 fields are text which I can populate the Word without any issues. However the fourth field is a memo with >255 characters.I'm struggling to come up with the proper code to allow me to populate the Word field with the memo data that has more than 255 characters. The code I have so far is listed below. But when it hits the memo field, it crashes on the line I marked with **. I know it's not text, but I've tried many different field types, but nothing has worked so far.[code]...
View 1 RepliesMy intent is to have the code - on a button.click event - check the Username and Password fields and return an error depending on which is wrong. Or if both are wrong, return a different error message. I've set the username as parts and the password as parts (still learning how to use external authentication). [Code]
View 2 RepliesI have several sqldatasources for my gridview. All of the columns are autogenerated. However they all have some consistent fields and I'd like to make those fields template fields so I can modify the edit template for them such as adding a drop down menu. Is this possible?
View 1 RepliesAre there any IP Address filters or masks available in Windows Forms as per following screenshot? A backslash shouldn't be allowed or it should be filtered somehow.
View 1 RepliesSocketException was Unhandled: Only one usage of each socket address (protocol/network address/port) is normally permitted I get this error every time i click collect a second time.
[Code]...
Can anyone point me to some code which can help obtain the network address from the host IP and subnet mask?
View 3 Repliesc# - Are Microsoft Entity Framework and ADO.NET Entity Framework (.edmx) the same?
View 7 RepliesI made web browser which consist address bar that I use it to type addressess in it i.ewhen I type [URL] it opens [URL] but when I go to anther page in google it doesnot show it's link in address bar lix InterntExplorer or other international browsers so how to show any link or any sub page's link in my browser address bar ?
View 1 RepliesI'm trying to use the DHCP API (using the references on pinvoke.net) to retrieve a computer's MAC address when given the IP address but I can't get the code to work. I've run all the C# code on pinvoke.net through the C#-to-VB converter but I'm stuck now.
Here's what I have so far. The value of res is always 5 (should be 0). Thing is, I can't find any documentation on what the return codes mean
vb
Private Sub GetMACDim client As String = "1.1.1.1" Dim server As String = "0.0.0.0" Dim si As New NativeMethods.DHCP_SEARCH_INFO si.SearchType = NativeMethods.DHCP_SEARCH_INFO_TYPE.DhcpClientIpAddress si.ClientIpAddress = Convert.ToUInt32(StringIPAddressToUint32(client)) Dim res As UInteger Dim oInfo As IntPtr
[code]....
' Use Your work Group WinNT://&&&&(Work Group Name) Dim DomainEntry As New DirectoryEntry("WinNT://Wokgroup") DomainEntry.Children.SchemaFilte
[code].....
experience on how to create an engine using C# (VB.NET is okay too) that is generic enough to handle most cases of MS Word text fields I need to fill with data I'm getting from a database? In short, I'm about to embark on this little Office automation excursion and I'm hoping a little bit of feedback here.
View 2 RepliesI have a table which contains a list of products for a company. They input data about how much stock they have and also the level at which they want to be reminded that they need to order new stock.
[Code]...
I want to list all the true results in a form which the user is then able to navigate through. What would be the best way to go about doing this?
how to execute this SQL Statement
Scenario:
Given Tables T_Data, T_AllDesc, T_System1, T_System2
Given Fields:
T_Data= f_id, f_Desc, f_CreationDate, f_CreationTime, f_System1, f_System2
[Code].....
In member register page, I added email address validation but it only check the email address format, such as .com, .net, .org.If user inputs fake account such as aaabbb01010@gmail.com, how to verify it and return an error?
View 2 Replieshow to assign a static ip address and dns adress by VB2008?
I search in MSDN,use system.net.ipaddress??or something else?
does anyone know how to get a computer's mac address with an IP address?
View 25 Replieswhere i put the *'s i get the error "The parameter 'address' cannot be an empty string. Parameter name: address".
Private Sub Timer2_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer2.Tick
Dim mail As New MailMessage()
Dim SmtpServer As New SmtpClient
[code].....
in my database there are 3 tables
CustomerType
CusID
EventType
EventTypeID
CustomerEventType
CusID
[Code]...