Numbrix Puzzle - Write And Test A Vb Program ?
Sep 9, 2009I have to design, write and test a vb program to help the user slove the numbrix puzzle
so far I had this
[code]
I have to design, write and test a vb program to help the user slove the numbrix puzzle
so far I had this
[code]
I am working on an assignment for my Programming Logic and Design class. I also noticed a couple other similar posts but after going through them I still have an issue. I was suppose to write a program that will allow input of three test scores, average them then display a letter grade in a box. At this point the only thing that is being displayed is "F". [code]
View 3 RepliesI have to write a program for a user to take a 20 question test (A, B, C, D). The users answers will be stored in an array and compared with a 2nd array that has the correct answers. Its then supposed to go to a 2nd form when you click show score, grade it, and display whether each answer was right or wrong. I'm missing something easy probably.
CODE:
Probably a dumb question, but can you write a unit test project in one language to test against another project in a different language?I'd like to translate one of our VB assemblies into C#, but want to build unit tests to verify the results. I've tried to set a unit test project up to do this, but I can't seem to access the VB code within a unit test... I can't figure out if I'm just missing/doing something stupid, or it really isn't allowed.
View 2 RepliesPublic Class Class1[code]...
Granted this example is pretty weak, but how could I write a test method that to prove that CallThis() gets called everytime that the input parameter s = "S"?
I'm still trying to understand and use Use Cases and Test Driven Development, but having a hard time crossing the line. I'm hoping someone can provide a good example of how setting a datasource and/or databinding a gridview could be accomplished using Test Driven Development. Here is my pseudo approach at it.
[Code]...
In class i saved my program in with load of other test programs for the same assignment and got everything mixed up i finally figured out what was what and loaded the program in Visual Basic. Now my program doesn't recognize one of my forms when i try to access the design view of it. I hit run for the hell of it and the program runs with errors of course but the form1 "the missing one" shows up with all the buttons etc and i can use it.
Heres the link to the files. [URL]
Or richtextbox? lets say i have 10 words. how do i place it in textbox or richbox? with different direction and location?
View 3 Repliescan you make the words appear in the puzzle? and then i will figure out how to highlight the correct words or something. [URL]
for example is to have the word forget in listbox2 which is the first word in the puzzle.
Option Strict On
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]......
I puzzle with (setting uptime-real time clock) calculation.ex. if I want my stopwatch countdown fromtart: 18.20.30 - stop: 18.50.50 = difference time is 00.30.20 that is easy butstart: 18.20.30- stop: 18.50.40 = difference time is 00.30.40
View 10 RepliesI have created an algorythm for creating a crossword puzzle, but I am not pleased yet.
View 1 RepliesLet's say I have an object that contains a Word property and a Sentence property. The sentence must use the word, and I want to replace the word in that sentence with a link using a public function (say, GetLinkedSentence). The catch is maybe the sentence uses a plural form of the word and maybe the "word" itself is actually a phrase, or is even hyphenated. There's no length limit to the word either. How do I find and replace this word (in ASP.NET, preferably VB) with a link [word])?
View 2 RepliesHow are crossword puzzle grids made? I have written a program to generate a puzzle, my problem is the GUI part.I ended up using Visual Basic (VB) because I'm more familiar with that language.However, eventually I have to write this in Java. So far the only way I am displaying the results in a grid-like format is using two controls Groupbox with a Label inside it.This way I can put the number to the word's clue in the title line of the Groupbox, and the individual letter in the Label. To make the cell in the grid editable (my goal for a different version of the puzzle), I guess a Textbox would have to replace the Label.The GUI for real online (professional) crossword puzzle grids is much nicer than this.I know there is a way to combine controls to make a customized one. Even if this works in VB, I'm not certain if it can be done in Java, therefore, I really don't want to go that route (unless someone knows how make customized controls in Java). I have searched the net and looked in books on games, VB and Java with no luck.I need something that I can grow dynamically depending on the grid size needed to hold the content.
View 1 Repliesin my Application Prime95 is opened for 60 seconds. i want to know how to make the test end if the user closes prime95.
* how to detect if prime95 is not running in short *
I have the following module and i would like to test connection.[code]...
View 2 RepliesI am creating a puzzle game and would like to calculate the width and height of the puzzle taking into account the original image size and the screen resolution. My screen height is 768 and width is 1366. An example image is 1200 x 1600 and the jigsaw size that works well with this image is 480 (height) x 640 (width). I would like to create an algorithm that calculates the jigsaw size for any image bearing in mind that the screen resolution will change as will the size of the image.
View 2 RepliesI'm new to VB and I'm doing a calculations program for test scores. I got everything setup for my clear and exit buttons but not sure what I have to put in the calculate button code for it to calculate. Here is what I have so far.
Public Class Form1
Private Sub Label5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lblTestScore5.Click
End Sub
Private Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
[Code] .....
I have a project named Mapstuff which contains several class modules. I have created a console app called TestMapstuff where I would like to test several of the classes that I have created in Mapstuff. All of this is under development. The files are stored like this:[code]How do I import the Mapstuff classes into the TestMapstuff app?
View 8 Repliesare there any way we can make a program to test a speed of mac even if you are not using it?
like for instance
64:16:F0:003:9A
how can i test this without using it?
How can I test my codes efficiency in vb.net?
View 1 RepliesI have a 'health check' program that I have scheduled to run every 10 minutes. When it detects a problem, it sends a message to my cell phone.
Right now I have it checking databases by connecting to them, and trying to open them - that seems to work fairly well. I also have it checking web sites but all I'm doing to test them is[code]....
I would like to develop a very simple question-answer program whereby there is a user form with a label which contains the question, a text box where the user enters the answer and a button that the user clicks to change to the next question. This should be rather simple but I would like to have about 500 questions in the end (will be slowly adding more questions).
View 19 RepliesI have created a small test program for faxing.On some machines it works and on others it throws the following COM error when trying to send the fax:[code]Here is the source code from my test application.All it requires is a reference to FaxComExLib.[code]
View 15 Replies[code]...Basically, I'm trying to make it so when you type a number between 1 and 16, it runs it through the equation and displays a result in a label. This event happens after you press a "yes" button.The problem is when I test the program I put any number from 1 to 16 and I get my own error message, specifically the <1 error. It doesn't make since because I type in numbers that are greater than 1...
View 1 Repliesi would like for my first project to be a CPU stress testing program (kind of like Core Damage or Intel Burn Test).I have no problem designing the form, but how and where should I start? I've done some searching, but haven't really found much. I think the reason for that is because nobody is really going to just give out source code for anything (which is completely understandable).
The main thing I would like to understand is what exactly makes the CPU work at 100%? And how could I design it to where it automatically determines the amount of cores/threads the CPU has, and utilize them 100% without having to open up one instance for each? Or is that jumping too far ahead?
EDIT > I know that I'll need to create some kind of loop for the CPU to process over and over until closed. I was thinking something along the lines of calculating Pi to 32 million digits or something like that.
> Another goal is to have some sort of error checking capability. I am an overclocker, and I would like to have this ability with this program. For example, it I make it to calculate Pi, then I would like for it to tell me if there were any errors in the digits it produced.
I am a EE graduate from about a year and a half ago working in the semiconductor industry as a hardware/test engineer. I wan't to learn VB to do lab level data test and acquisition. I am learning this in my free time at work and home, and I would be using VB to talk with different electronic equipment through GBIP to source, measure, and record data. Anyone have any good ideas of a good book for such applications?? I know there are a ton of books and courses out there, but 99.9% of that information is not going to be needed for my industry application. I also took a few C classes in college, and I have some experience with labview so I am not a total noob to programming. So if anyone has a good book, or refferences that would be really appreciated.Also what version of VB would you recomend me learning?
View 4 RepliesI need to set up a small program/script that can test simple web functionality.I already have a window that automatically load the right URL. What I need now is pointers to how I can make that program return a code if it can load the site, then automatically log in to the site and return a code if it is able or not to log in. Then log out, wait for five minutes and then refresh the site and run again.
View 2 RepliesI don't understand the error, Argument not specified for parameter 'test' of 'Public Shared Function TestThis(test As String)'.
Partial Public Class Form1
Shared Sub ReceiveCallback(ByVal ar As IAsyncResult)
Form1.Invoke(TestThis, New Object(){"test"}) 'error
[code].....
the rules are that same coloured blocks of two or more can be removed by clicking on them. blocks then slide down from above. if a column is empty columns other columns move in from the sides.when someone clicks on the green blocks in the bottom row the columns should slide in from the sides. columns to the left of the black line slide right and on the right of the black line slide left. so in this case only the two rightmost columns should slide from the right to the black line after removing the green blocks.The problem i am having is in designing a suitable algorihm to do the collapsing after the removal. my current approach is to test each column from left to right to see if it is empty. if it is empty then i slide whatever column is to the left (if left of the black line) or to the right (if to the right of the black line) over the blank column and repeat this in the direct i am sliding from
View 1 RepliesI want to write a program to write in an xml file in this format:
<?xml version="1.0" encoding="utf-8" ?>
- <Orders>
<Item id="1" SKU="998123" Description="Super Widget" Quantity="100" />
[Code]....