In an installation on the user machine , it was required to Register an Assembly in the GAC.i registered it using the .net config utility from control panel.But .net config utility is available only if .net frame 1.1 redistributable is installed or .net 2.0 full sdk is installed ( or vs 2005).i was wondering if i can use gacutil to place the assembly in GAC on a machine which only has .Net framework 2.0 redistributable installed on it.
View 6 Replies
When running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?
View 23 RepliesWhen running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?
View 2 RepliesI have recently upgraded an VB6 project to vs2008. I was almost finished when the following error occured. Unable to emit assembly: Referenced assembly AxInterop.MSFlexGridLib does not have a strong name Prior to this error appering, I tested my app several times and it was fine. Only after publishing it did the error appear. I have tried all solutions I could find, but nothing helps. I have read [URL]
View 1 RepliesI receive this error as "Assembly Load Error" whenever adding a form or other object that has to be inherited.
"Unable to load assembly. Ensure that the file is a valid .net Framwork assembly"
I am loading an Assembly using Assembly.LoadFrom() as the assemblies are located in a different path from Application Base directory.
Dim oAssembly As Assembly = _
Assembly.LoadFrom("C:\MyFolder\" + ddlXlate.SelectedItem.ToString() + ".dll")
And I consume a Type from that assembly without any problem:
oXML = CType(oAssembly.CreateInstance(sBaseType + ".XlateContainer"), _
XlateBase.XlateContainer)
However, the problem occurs when I try to use a Type from this assembly from within another method like the one below:
oComboBox.DataSource = _
[Enum].GetValues(Type.GetType(sType + "+ItemEnum," + sAssemblyName))
sAssemblyName is the one I loaded using LoadFrom() actually. After it said it cannot find the assembly, I used AssemblyResolve event which solved my problem :Subscribing AssemblyResolve event :
AddHandler AppDomain.CurrentDomain.AssemblyResolve, _
AddressOf MyResolveEventHandler
Event Handler Method:
Private Shared Function MyResolveEventHandler(ByVal sender As Object, _
ByVal args As ResolveEventArgs) As Assembly
Return Assembly.LoadFrom("C:\PSIOBJ\" + args.Name + ".dll")
End Function
And I thought maybe the error occurs because it cannot find a dependent assembly defined in assembly manifest file I loaded using LoadFrom() already but when I checked the args.Name, I saw it was trying to load same assembly and after that it worked without any problem. So basically a type in the loaded assembly cannot be found before the event adding change.
My old code was using AppDomain.CurrentDomain.Load() and Assembly.Load() methods and they were working fine without the AssemblyResolve event. I was able to reach types in dynamically loaded Assembly from every where within the same AppDomain.
LoadFrom() can find dependencies automatically within the same requested assembly path and that couldn't be problem as everything this dll needs was there. So at first it looked like a AppDomain problem to me as it looks like it seems it can reach assemblies from Load context instead of LoadFrom context and I am now using LoadFrom context.But now it seems I should pass oAssembly instance evertwhere to use any type from the loaded assembly?Doesn't it load the assembly where I can reach it everywhere (same AppDomain) using simple Type.GetType(...) method?
I'm wanting to include a system tray icon in my WPF project, and found this resource:[URL]..which looks like it will work beautifully, but it's written for C# and I'm using VB.net for this project. I downloaded his project and built the notifyicon as a DLL, then added as a reference to my project.
It throws up an error: Unable to emit assembly: Referenced assembly 'Hardcodet.Wpf.TaskbarNotification' does not have a strong name So I'm trying to figure out the best way to proceed. Do I need to strong name it, or is there a better way to do this?
I've got an exception when I deployed my application: "the located assembly's manifest does not match the assembly reference" What I remember is changing the project name from the previous source code, does it affect that much?
View 1 RepliesI have created several DLL (.NET) libraries that are used in several projects. In these DLL libraries I want to know/retrieve which assembly (EXE) calls/uses the library, so if possible I want to know info like assembly name (EXE), strong name, version number, etc.
NB: Examples may be in C# or VB. I use both languages.
I have written a .net assembly which plugs into to a third party COM application. The .net assembly is COM visible to the third party application. However this .net assembly references other regular assemblies. If I put these assemblies in the GAC the COM visibile assembly sees them without a problem. However for various reasons I do not want to put them into the GAC but I cannot get my COM visible assembly to see the other assemblies when they are in other locations. I have tried putting them in the same directory as the COM visible assembly. I have tried putting them in the same directory as the third party app's exe but neither of these work.
View 5 RepliesWhen ever I finish simple programs no matter what it is and i click to debug it it comes up"Error while trying to run project:could not load file or assembly"project name" or one of its dependencies.the module was expected to contain an assembly manifest"
View 4 Repliessorry for my English, I don't speek well... I need to compile assembly in memory, that can compile another one. There is a form with one button. Here is a code of the form
Imports System
Imports System.Threading
Imports System.CodeDom
Imports System.CodeDom.Compiler
Imports System.Collections
[Code]...
Since, it's possible for anyone to name an assembly starting with 'System', checking for 'System' is not a satisfactory solution.
Alternatively, if that's not possible, how about checking the modules in an assembly?
I am building a dll-Assemby A which references another Assembly B. Assembly B is strongly named and installed in the GAC of my development computer. An other computer will not have assembly B installed in the GAC.
Question: If i handle strongly named assembly B like a private assembly and copying it into the bin-directory by specifying local copy = true in the properties-window, will the programm run on the other computer?
One of them is giving us trouble in only 1 spot out of the 4 spots we use it at:The trouble spot is a windows form project that uses reflection to dynamically load some DLLs that run long running processes. One of these long running processes is an agent that relies on one of our vender DLLsWe're getting the missing assembly exception at the point where we first enter a function that references the library. I already checked the silly things such as if we had forgotten to move a reference from the old version to the new version, but that's not the case. I also checked the bin directory of the project and the assembly is there.
View 3 RepliesIm currently working on a program that will download some files and place them inside a folder. The tricky part is that the folder they have to be puttet into is a .jar file. The jar file is always the same place, and that is in %appdata% the full location would be "C:UsersBrugerAppDataRoaming.minecraftinminecraft.jar". With "minecraft.jar" beeing the destination for the files
Ps. Im trying to create a mod installer, since some people are having a little trouble installing mods for minecraft. Minecraft can be found at [URL]
I'm trying to place a Label at runtime like this:Form2.lblMaxLandingWt.Location.X = Form2.Panel1.Width * .65but I get an error "Expression is a value and therefore cannot be the target of an assignment"
View 9 RepliesIs it possible to place data from a vb.net windows form program to a program that we can't edit. What i am trying to accomplish, is setup either an automation or select several drop downs and press save and it will save everything into the program that we don't have control over.I can find the window handle and the class for each window with spy +++ would this help me so i can atleast put text into a box? The program i am trying to place data into doesn't write to any type of database it only writes to an xml file. From there we pull data from the xml file to feed our vb.net program Where is the best place for me to start on this?
View 7 RepliesI have opened a form. I have put a checkbox on the far left of the form. I have labeled the checkbox "Hello."I have open a textbox on the far right of the form. And I have removed the default name text1 the textbox using the properties drop-down menu.The code for the check box is as follows:
Private Sub Check1_click()
Open "C:MyFile" for Append as #1
A= "Hello"
Text 1 = A
[code]....
Discussion: It does indeed print the word "Hello" in the textbox as desired. But, it also prints the word "Hello" in the upper left corner of the form. I don't want the word "Hello" anywhere on the form other than the textbox. My question is "How do I keep the computer from generating text on the form outside of the text box.I have a Satellite Toshiba Lap Top M35-S3592, use XP Professional and the Visual Basic Version is VB6.
I am trying to figure out how to place controls on top of one another in html.For example. I am trying to place 2 labels on top of eachother. and also I am trying to place a text box under a dropdownList.
View 3 RepliesI'm new at the forums but not to .net development. I'm trying to make an application, which stays above the Dektop level but ALWAYS below any opened window. This application cannot be minimized, it has to be visible as a desktop background (just for getting you the main idea). As I was reading, I found that the way to make the form not to minimize is by using the WndProc function, and intercepting the Minimize message. My question is.. which of all the available messages is the correct for this case?.
P.D.3 (And last one I hope): See, the main reason of this application, is to make some kind of an "Active Desktop" function, which is not supported by Windows XP 64-bit. As XP64 doens't come with Active Desktop to use Web Pages as Desktop backgrounds, my idea is to make an application which loads certain web page and put's it on the desktop background.
I have a project with a number of forms. In Form2, I have a split container. In panel 1, I have a number of radio buttons. What I have not been able to do is use the radio buttons to select a form to be shown in the panel on the right.
[Code]...
Im trying to place 63 squire images on my forms background with a keystroke. I need to be able to set the location of each image i have( they are all in my resources) Is there any easy way to do this? Or any way to do this at all? I need them placed on my forms background because i would like to add a second layer of simi-transparent images over top using pictureboxes.
View 1 Repliesgetting a scrapped list from a website into a listbox. I now need to use the contents of that listbox in a combobox and am going nuts. I have included the code
[Code]...
i saw this article that shows printing of listview using printdocument.. i want to place my list view on the middle of the page.
View 5 RepliesI have some code that I've inherited, and it's not the greatest in the world, but it works, with one small exception:
This page is a directory search, it has controls identified by record ID, however there exists a situation where there can be more than one result with the same record ID, thus making .NET barf. I had originally implemented a check that just didn't put the control on the page, if it was already there, but we've been getting negative feedback.
My question is this: Is there a way to put the same control in two places at once, for instance having if a user checks one, the corresponding one checks as well? I'm not terribly well versed in how .NET behaves, but I'll try to provide as much additional context as possible, if needed.
EDIT: Here's the updated code that generates the controls by looping over a datatable of results
Dim cbxSendInfo As CheckBox
Dim strCheckboxID As String = "cbxSendInfo-" & drOrganizer("ID") & "-" & i
Debug.text = Debug.text & " Loading Checkbox (" &
[Code]....
Where drOrganizer("ID") is the record ID, and i is the result record number.
I know this is a terrible way to do this, at least from my background, but like I said, this is inherited code that's been hacked to pieces.
I am working on a program. I've got the following
Private Sub frmTabel_Activated(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Activated
Dim strHoofding As String
strHoofding = "Geleend bedrag : " & _
strRechtsUitgelijnd(Format(glngBedrag, "‚¬ #,##.00"), 15) & vbCrLf & _
[Code] .....
What it should do is placing the four formats but I am only getting result from glngBedrag'
Like this: [URL]
Probably a dumb question, but can you write a unit test project in one language to test against another project in a different language?I'd like to translate one of our VB assemblies into C#, but want to build unit tests to verify the results. I've tried to set a unit test project up to do this, but I can't seem to access the VB code within a unit test... I can't figure out if I'm just missing/doing something stupid, or it really isn't allowed.
View 2 RepliesI have been placing my database fields (details view) on a form but for some reason they are all appearing as text boxes with the exception of date fields. Why are none of them showing as drop down lists?
View 1 RepliesI have the code written for everything except when I try to display the highest and smallest numbers from the array into a label it display 0 for both the smallest and highest number. Question: Create an application that lets the user enter 10 values into an array. The application should display the largest and smallest values stored in the array. *The form is a list box with 2 labels and a button to retrieve the 10 numbers and put them in the list box then the other button puts the highest and lowest number in the 2 labels
(I am not sure how to display line numbers in my code on VB2010, please if you know tell me and I will edit the post)
[Code]...
