I am trying to figure out how to place controls on top of one another in html.For example. I am trying to place 2 labels on top of eachother. and also I am trying to place a text box under a dropdownList.
View 3 RepliesI have so far written a program where you click a button and a custom control is added to the form. These controls can then be dragged and positioned anywhere on the form.I know want to be able to align/snap these controls.
View 11 RepliesIn my vb.net project, i use to add Datagridview dynamically into a tab control. tab pages's autoscroll property is set to true. i calculated the gap between consecutive DGVWs and pass the parameter in the location as like this. [Code]
supposing if i want to 7 DGVWS, say 5 DGVWs are placed finely in expected gap until i do the scrolling the vertical scroll bar. whenever i scroll the bar(vertical) to the downmost end and then again add DGVW into the tab page. unfortunately the 6th DGVW is placed somewhere down and the gap between 5th and 6th dgvw is enormous difference. what i understand is whenever the scroll bar is brought to the bottom most end, the drawing point is taken as the current top view. i don't want like this. Is there any setting needs to be take care.
Structure TextureStruct
Dim unk1 As ULong 'always 0x70007
Dim unk2 As ULong 'always 0x70007
Dim unk3 As ULong 'always 0x70007
Dim unk4 As ULong 'always 0x70007
Dim unk5 As ULong 'always 0x70007
Dim unk6 As ULong 'always 0x70007
[Code]...
vb program to append two pdf files together into one? I have invoices that are created as pdf files and I need to append a special announcement also a pdf to the end of it so I can upload one file to the internet for customers to download and view.
View 4 RepliesI need to take six altitudes altitude1 and altitude2 and check to see if they are with in a value of 250 of each other. Then if there are any that are within 250 of each other, to make them turn red.
Second thing is:
I need to take 6 altitudes, and arrange them. I have them in panels and I have 6 empty panels as place holders for .location value however I need to know how to look at 6 values and say arrange these values accordingly highest number this place lowest number this place etc.
I have looked everywhere on the internet and maybe im just retarded when it comes to math in vb.net.
Is there any way to generate checksum for a dll from the main app (compiled) and the main app from the dll when I run the main app or something of this kind?
View 3 RepliesI'm trying to fill a web ASPX form thru a VB.NET desktop program using the IE control SHDocVw.InternetExplorerSo far i can set all the textfields that i have to set and click the send button, but i have a small problem: i have to execute a "validation" java script code that is on the ASPX page before clicking the SUBMIT button.
Here's my code:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[code]....
I made a windows form application using Visual Basic. One window has these controls: a web browser , a textbox (textbox1) and a button (button1). The webr bowser will have buttons and a text box which will display different numbers
View 3 RepliesI have hex strings that I would like to write a regular expression for. Here are some example strings.
[Code]...
I've noticed that a class can "overload" a read-only property of its parent class, even though this isn't allowed within a class. I don't understand why this is allowed or what (if anything) it accomplishes.
[Code]...
The signature of mySubClass.SomeProp is identical to myClass.Prop—how can the former overload the latter?
In practice this seems to function just like Shadows, is that true?
Get Webbrowser Controls HTML I can get the current browsers html, however, when the page is updated via ajax, or has another form popup, it dosent see this new data.
Is there a way to get the new html that was added by ajax to the current docuement?
I have the following client side code in .aspx page within a datalist itemtemplate that takes questions from the database like this:
<Itemtemplate>
<b> <%=GetQuestionNum()%>)
<%#Server.HtmlEncode(Eval("Text").ToString())%></b>
[code]....
but I'm finding it impossible to work with the html controls, i.e get their .text value from codebehind, or adding events! better way to replace the html with suitable asp.net web controls or from the codebehind and output it.
I've been programming in VB6 for years, I have decided to take the plunge into VB.net and C# 2010 but having a little problem understanding the big picture.In VB6 I could create user controls and save them as .ocx files, then use those .ocx's in other programs or on html pages. I am sure the same idea is present in VS 2010, I'm just not seeing it.Can anyone recommend a book or tutorial that will show me the big picture of all the aspects of the .net environment?
View 2 RepliesThis may sound really stupid but I have to ask cause I'm not finding this answer anywhere.I have an application where the user will need to sign up for a new user account on the website [URL]..However when I am using Firefox's plug-in Firebug to view html I am getting something totally different than when I just right click on the site and view the page source.
What I am trying to do is to get the captcha from the website and display it in a picturebox on the application so the user can view the captcha, solve the captcha and then the app post is back to the service for a response.
Here is the source that I am getting using Firefox's Firebug to inspect the element:
<td>
<input type="hidden" value="Oo3Jo1I8bgzK68agMqo3s79ZZib2OkbK" name="iden">
<img class="capimage" src="/captcha/Oo3Jo1I8bgzK68agMqo3s79ZZib2OkbK.png" alt="i wonder if these things even work">
</td>
[Code]...
Why would the two be showing me two different versions of the HTML?
And how would you be able to grab that source to view in a picturebox using webclient?
Usage: Users create pretty HTML news letters in another app. They post the newsletter to the web, but they also want to set the contents of the HTML news letter file as the body of an email and send it using Application In Question. The users understand to use absolute link and image references when sending an E Newsletter. Environment:
AIQ is a VB.Net app deployed via ClickOnce. It is an intranet app; one can be sure MS Office 2003 and the interop 11 dlls are on the target machines.
Restrictions: MAPI is out. It mangles the HTML. Since it is a ClickOnce deployment, we can't register dlls (I think, correct me if I am wrong). Therefore CDO and COM is out (again, I may be wrong.... I would be happy to be proven so).
Well im currently developing an application for public use, I have a login screen in which the user enter's their registered credential's and the progressbar loads by increments of 3, now i placed 6 labels ontop of eachother and where the progressbar coding is i put:
If Progressbar.Value >= 1 Then
Label3.Show()
If Progressbar.Value >= 20 Then
Label3.Hide()
Label4.show()
And so on up until Label8 Show at 100%,
Now the problem is... As i have placed the labels ontop of eachother i need them hidden until they are called to show, i have tried adding a background worker to do this but have had no luck, all i see is the labels overlapping eachother when i run my application when i want them hidden untill Label3.Show() is called, and then to display them as they are called and hide them when another one is called to show...
In an installation on the user machine , it was required to Register an Assembly in the GAC.i registered it using the .net config utility from control panel.But .net config utility is available only if .net frame 1.1 redistributable is installed or .net 2.0 full sdk is installed ( or vs 2005).i was wondering if i can use gacutil to place the assembly in GAC on a machine which only has .Net framework 2.0 redistributable installed on it.
View 6 RepliesIm currently working on a program that will download some files and place them inside a folder. The tricky part is that the folder they have to be puttet into is a .jar file. The jar file is always the same place, and that is in %appdata% the full location would be "C:UsersBrugerAppDataRoaming.minecraftinminecraft.jar". With "minecraft.jar" beeing the destination for the files
Ps. Im trying to create a mod installer, since some people are having a little trouble installing mods for minecraft. Minecraft can be found at [URL]
I'm trying to place a Label at runtime like this:Form2.lblMaxLandingWt.Location.X = Form2.Panel1.Width * .65but I get an error "Expression is a value and therefore cannot be the target of an assignment"
View 9 RepliesIs it possible to place data from a vb.net windows form program to a program that we can't edit. What i am trying to accomplish, is setup either an automation or select several drop downs and press save and it will save everything into the program that we don't have control over.I can find the window handle and the class for each window with spy +++ would this help me so i can atleast put text into a box? The program i am trying to place data into doesn't write to any type of database it only writes to an xml file. From there we pull data from the xml file to feed our vb.net program Where is the best place for me to start on this?
View 7 RepliesI have opened a form. I have put a checkbox on the far left of the form. I have labeled the checkbox "Hello."I have open a textbox on the far right of the form. And I have removed the default name text1 the textbox using the properties drop-down menu.The code for the check box is as follows:
Private Sub Check1_click()
Open "C:MyFile" for Append as #1
A= "Hello"
Text 1 = A
[code]....
Discussion: It does indeed print the word "Hello" in the textbox as desired. But, it also prints the word "Hello" in the upper left corner of the form. I don't want the word "Hello" anywhere on the form other than the textbox. My question is "How do I keep the computer from generating text on the form outside of the text box.I have a Satellite Toshiba Lap Top M35-S3592, use XP Professional and the Visual Basic Version is VB6.
I'm new at the forums but not to .net development. I'm trying to make an application, which stays above the Dektop level but ALWAYS below any opened window. This application cannot be minimized, it has to be visible as a desktop background (just for getting you the main idea). As I was reading, I found that the way to make the form not to minimize is by using the WndProc function, and intercepting the Minimize message. My question is.. which of all the available messages is the correct for this case?.
P.D.3 (And last one I hope): See, the main reason of this application, is to make some kind of an "Active Desktop" function, which is not supported by Windows XP 64-bit. As XP64 doens't come with Active Desktop to use Web Pages as Desktop backgrounds, my idea is to make an application which loads certain web page and put's it on the desktop background.
I have a project with a number of forms. In Form2, I have a split container. In panel 1, I have a number of radio buttons. What I have not been able to do is use the radio buttons to select a form to be shown in the panel on the right.
[Code]...
Im trying to place 63 squire images on my forms background with a keystroke. I need to be able to set the location of each image i have( they are all in my resources) Is there any easy way to do this? Or any way to do this at all? I need them placed on my forms background because i would like to add a second layer of simi-transparent images over top using pictureboxes.
View 1 Repliesgetting a scrapped list from a website into a listbox. I now need to use the contents of that listbox in a combobox and am going nuts. I have included the code
[Code]...
i saw this article that shows printing of listview using printdocument.. i want to place my list view on the middle of the page.
View 5 RepliesI have some code that I've inherited, and it's not the greatest in the world, but it works, with one small exception:
This page is a directory search, it has controls identified by record ID, however there exists a situation where there can be more than one result with the same record ID, thus making .NET barf. I had originally implemented a check that just didn't put the control on the page, if it was already there, but we've been getting negative feedback.
My question is this: Is there a way to put the same control in two places at once, for instance having if a user checks one, the corresponding one checks as well? I'm not terribly well versed in how .NET behaves, but I'll try to provide as much additional context as possible, if needed.
EDIT: Here's the updated code that generates the controls by looping over a datatable of results
Dim cbxSendInfo As CheckBox
Dim strCheckboxID As String = "cbxSendInfo-" & drOrganizer("ID") & "-" & i
Debug.text = Debug.text & " Loading Checkbox (" &
[Code]....
Where drOrganizer("ID") is the record ID, and i is the result record number.
I know this is a terrible way to do this, at least from my background, but like I said, this is inherited code that's been hacked to pieces.
I am working on a program. I've got the following
Private Sub frmTabel_Activated(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Activated
Dim strHoofding As String
strHoofding = "Geleend bedrag : " & _
strRechtsUitgelijnd(Format(glngBedrag, "‚¬ #,##.00"), 15) & vbCrLf & _
[Code] .....
What it should do is placing the four formats but I am only getting result from glngBedrag'
Like this: [URL]
I have been placing my database fields (details view) on a form but for some reason they are all appearing as text boxes with the exception of date fields. Why are none of them showing as drop down lists?
View 1 Replies