The below photo shows that point 4 is connected to point 1 while point 5 is not connected to point 1 according to the flow direction. How can I programme this?
The below code shows the connections between nodes where the row of the matrix represents "FromPoint" and the column represent the "ToPoint".Public Class Form1 Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase .Load
[Code]...
This thread (Question) is a continuation of a question answered by JohnWein. the original question asked by me in this thread:http://social.msdn.microsoft.com/Forums/en-US/vbgeneral/thread/4d9b44a0-91ed-4f64-a3a2-74afffce2256 an this is the answer:
[Code]...
The question is, in the case of four connections, how can I make sure that all points are connected with minimum number of connections using the same above code?
Instead of defining the Points in Series Collection Editor, can I define them from textboxes, numeric up down or something like that?
Example: Having a numeric up down, the number I put there appears as Y value for a X value that never changes, even when I change the numeric up down value.
I have an array of type Double() (1 x n) that I am trying to quickly plot on a graph I've already set up. The only thing I want/need to do is take my array and store it as data points (y-axis values) in the series I already have. What's the best way to do this? Also, will the data points that are plotted change as my array changes, and if not, how would I replot those new points and get rid of the old points?
View 1 RepliesI have an ASP Chart (v4) which displays the data I need perfectly. I want it to show labels at the top of the data points and I am having some difficulty with it. Here is my code that works for both series but does not display the labels:
[Code]...
Im starting to learn how to use the chart control in VB .how you create a "new" column because atm all the time i add series it puts them side by side.Ive looked at the documentation for the control and the examples but they dont seem to cover this , or i could find it .Now how would i assign each series to a new point?So item 1 would go above column 1 and item 2 above column 2 etc.The code i have at the moment is a test code .
Chart1.Dock = DockStyle.Fill
For i As Integer = 0 To 10
Dim newSeries1 As New Series[code]..........
I was wondering if there's a way to add points to something defined like this
[Code]....
find the angle between two points: Point(0,0) and Point2(26,79)
View 10 RepliesMake a grid with points that dots may be placed at just by clicking that point
View 4 RepliesUsing VB.Net and SQL Server 2008 R2: I have recently had a database that using sp_who2 reflects a connection ".Net SqlClient Data Provider" is still active even though the .Net application has closed and disposed of all connections.
[Code]...
is there a way to offset the points in a polygon without having to change each one individually the points are in an array
View 2 RepliesI hve been working with points a lot recently, and I have been wondering if there is a way to set a point without setting point.x and point.y separately. For example for (3, 5): Point1 = (3, 5) But that isn't right
View 4 RepliesI have a Diagonal line drawn on a picture box on my forum and i need to know if the user has clicked the line I have the Start point and End Point of the Line and the mouse x,y location So i basically need to find out if the x,y of the mouse is on the line.
View 2 RepliesI'm trying to extract a piece of text from within the string, defining both a starting point and an ending point. For instance, say I want to search for the text found between "That is a " and " car" in the string "That is a red car", so it would return "red".I know you can use .SelectionStart and SelectionLength, but the length of the word can change, so the selection length can vary. What I want is to establish a specific starting point and a specific ending point from which to extract the text from the string.
View 5 RepliesI want to know if its possible to loop in a variable and grab info from point a to point b
This is what I have stored in my Variable
PHP
</div> <!-- div reviews end white-space:nowrap; margin-bottom:5px; class="reviews" -->
<div class="list_address">
[Code].....
how can i get the points which make a polygon from a region which was derived from the polygon's points?
View 1 Repliesi have a picturebox which displays a map i have 2 modes add point and delete point when the user clicks the picture it creates a point on the picture where the user has clicked that works perfectly its when i try and delete the point when it doesent work :/ i have all the points loading from an xml file this is the code i have:
[Code]...
basicly i want it to when the user clicks the point it fines the x any y in the xml delete the node then delete all the points on the map then reload them all according to the xml
I'm trying to calculate the direction between two points on a two-dimensional grid. Actually I want to determine if that vector is within a range of two values. Suppose the grid's origin is 0,0 at the upper left corner, and 0 degrees represents north. I have a point A on that grid. I want to know if a line from point A to point B on the grid is within a range of directions between 111.8 degrees (a little south of east) and 158.2 (a little east of south). Those are approximations; the 111.8 is 90 degrees plus the arctangent of 2/5, and 158.2 is 180 minus that value. I worked out a series of calculations worthy of a medieval astronomer, but I suspect there is a simpler way. I'm going to have to do this for a variety of other vectors, and I'd like to generalize
View 4 RepliesI know how I can construct an icon setting point by point, but that isn't what I want. I want to use a bitmap file or a jpeg -is easy to convert an jpeg to an bitmap- and built an icon that looks like this picture.
View 2 RepliesI want to make a drawing application which needs a few drawing functions I cant handle myself as im not very mathematicly inclined The first on the list of functions is to create an arc from a start point, end point and radius. The method signature is as followes.
Function CreateArc(byval StartPoint as PointF, EndPoint as PointF, Raduis as single) As PointF()
'Code to create an array of points...
[Code]....
I have a DataGridView that will occasionally have a RowError icon displayed in the RowHeader (shown below)I have code that displays a small form when the users mouse moves over the row header or clicks the row header.I would like to draw aline from the top-left of the form to the middle-right of the row header.I basically want to point from the form to the error icon.
View 1 RepliesI need to move an ellipse from a known point on the screen to another known point on the screen.
I've tried using For.....Loops with less than desired results.
I can't remember everything I've tried, a lot of trial and error has been layed to waste. Lol
I've ended up with this code after putting together what I've tried, what I've learned elsewhere, and a couple of posts I've read on here.
All I want to do is move the ellipse from one point to the other along a straight line that forms the angle between the two points (X1,Y1) and (X2,Y2), make it grow from 2 pixels at it's start, to about 80 pixels by the time it reaches half way, then shrink from 80 pixels back down to 2 pixels by the time it reaches the point (X2,Y2).
Easier said than done.
Here's what I have at the present.....
Dim W As Integer
Dim H As Integer
Dim Num As Integer
[Code].....
....This seems like such a simple task, yet it's been a week since I came up with the idea, and I've had little success.
come out with the codes for moving the mouse pointer from point (200, 100) to point (300, 400), repeatedly. Using VB 2008.
View 8 RepliesI looked around the forum can't find something really simple.I want to scrape everything between the
<!-- google_ad_section_start -->
to
<div class="ad_editorial-sponsorship"></div>
copy it and use it right after it's website and I navigate using webbrowser1.
i want to work on a shooting game,and i already have a code for the rotation of the image but i have a few problemFirst problem(for the tank /ship): i want the image to AUTOMATICALLY rotate facing the mouse cursor,i know how to rotate but but i dont know how to convert the location of the mouse to an angle that the image will face,,
View 1 Repliesassuming i have an isoceles triangle, where i know the height + base width, how
can i calculate the width of that triangle at 1/3 of the distance from the point + 2/3 of the distance from the point?
i thought it'd be simply 1/3 base width + 2/3 base width, but my drawing is +/- a few pixels when i resize it?
How do yo convert a 3d point into a 2d point that can be displayed on the screen? This is the basic code that I need:
Dim ScreenXCoord as integer
Dim ScreenYCoord as integer
Private Sub ConvertPoint(PointXCoord as integer, PointYCoord as integer,
[Code[,,,,,
I have a question about listbox. I want to display a series of * in one row. I know I have to use a loop, but I can not have the asterisk lined in one row.
View 3 RepliesI have a form in which there are two checkboxes then based on which check box the user selects a
series of labels and combo boxes are shown. I can't get the series of labels and cbx's to show and
to show when the check box is clicked.[code...]
I'm populating a listview with a list of databases on a selected SQL instance, then retrieving a value from each database (It's internal product version, column doesn't always exist) I'm calling the below function to populate the second column of the listview:
[Code]...