Prevent Double NAN Or Infinity Conditions?
Nov 4, 2009
Certain operations in .Net can give a double variable the values "NAN" or "1.#INF". That's great flexibility but I would rather an exception be thrown any time a double is given one of these values. In my program these values should not exist, and when it does it inevitably leads to an error down the road. I keep trying to put in checks using double.IsNAN or double.IsInfinity but certain things keep slipping by. So there is any setting in .Net to just make it always invalid for a double to be set to these values?
(Edit: also annoying that I think you have to use two checks: IsNaN and IsInfinity to catch these two possibilities. If anyone knows of one check that catches any double that is not a real numeric value it.
View 5 Replies
ADVERTISEMENT
May 26, 2009
I have a GUI with a few button on it and each button start an application. I want to prevent the application to start twice if the user double click on the button. How can I do that?
View 7 Replies
Mar 1, 2009
I am getting the followin error from my code. System.InvalidCastException was unhandled Message="Unable to cast object of type 'QADBASE.DMRDataLists' to type 'QADBASE.DMRData'." Source="QADBASE" I am getting the error in the code below on the createDMRIssue
[code]...
View 1 Replies
May 4, 2010
[code] does anyone knows if there's a infinity function for this code above? like "Dim dd(0 to infinity) as integer
View 1 Replies
Sep 10, 2009
I have to use some calculations now and then and sometimes those will give me inf, and sometimes they work, this makes my app very inaccurate...Now i dont know what is causing this, im not dividing zero so far i can see..
(3 + Math.Sqrt(5)) ^ ...
It works for single numbers, But how would i retrieve the ?double? of bigger numbers without getting INF?With bigger numbers i mean really big, like 1477014138.
View 9 Replies
Jan 17, 2009
Im trying to make it so that a user make a selection, with that selection is a IP address (192.168.1.) and than it gets looped and pinged from 2 till 254 strip = string and gets his value out of a case select. from mainpage (so its a public string)But i get an error that it cant get converted to a string and that it should be less than infinity.look code below.. i even tryed to make a seperate integer who adds the 2 others together (strip = 192.168.1. and intcount = 1 2 3 etc, those 2 together gives a full address)i cannot convert the strip to integer cause then it complains on the mainpage about the "cannot convert, should be less than infinity".[code]
View 2 Replies
May 15, 2012
I'm reading the highest value in my textfile and adding one to the value in my textbox, the problem is once the integer hits 100000 the program will crash, is it possible to make it infinity?[code]...
View 3 Replies
May 22, 2009
I am using vb express edition 2008. I need to check if an infinity (or NaN) number does exists but I don't know what my mistake is.
Dim Slop1 As Double
Slop1 = (20 - 10) / 0
If Double.IsNaN(Slop1) Then
MsgBox("Check the Coordinates")
End If
whats the diference between the 'IsNaN' and 'IsInfinity' is?
View 3 Replies
Aug 5, 2008
I have 16 buttons assigned a number on the form, the buttons should go from "" to "4" and back to "" again as clicked. If a button in a row, column, or region is the same it should evaluate as a bad move and provide the user with a message box indicating so. I have this working in a different program but I am now attempting to write efficient code. I must have left something out; I get an error when I click on any button stating my value must be less than infinity in my first for next loop. [Code]
View 4 Replies
Apr 12, 2011
Is it possible to assign a pixel value of a binary file to infinity? Lets say that my binary file is composed of 4 pixels only and the values are (1, 4, 8, &)... Would it be possible to assign the fourth pixel to infinity?
View 7 Replies
Jan 27, 2011
I have a situation where I am handling both single & double mouse click events on a form. In both cases something has to be loaded, however when a double click occurs, I do not wish to execute the code attached to the single click event.Is there a way to intercept the mouse click's and check if double or single and then execute the right event appropriately?
View 2 Replies
Nov 17, 2010
I have a htpc project that I am working on. The main program loads dll plugins which are basically other win forms. On each of these forms, including the main program, I use a picturebox (a double buffered picturebox) for the background image and then draw everything on it by hand. Whenever I load the form from the dll and show it, I get a weird flicker. It looks like it is the previously used double buffer. Is there any way to clear the background double buffer before the flicker? Or am I going in the wrong direction?
Here's a couple of videos of the problem:
[url]
[url]
Notice the black screen with the white lines on it or the flash of the desktop after I click "Movies." How do I get rid of that?
View 14 Replies
Aug 15, 2011
For greater accuracy I should use a Decimal instead of a Double ( so I've been told ). Why then have Microsoft chosen to use DOUBLE for most of the functions that return a floating point value in the Math Class?
[Code]....
View 9 Replies
Apr 4, 2009
In vb.net, im using objWriter.Write("playerA= "x"")as you can see im using double quotes inside double quotes, how do i skip it so the error doesnt show up?in php you make an "" to skip the string like ("playerA = "x" ")
View 6 Replies
May 9, 2011
I have 2 textboxs on Form5.TextBox1 as showing a result and Textbox2 for Input the some value.When user input a value (only two decimal place) then textbox1 showing the result by calculation on form2(DataGridview) and Form4(TextBox)
1.)I try this code but the Textbox1 on Form5 show "Infinity"..Why?
2.)It possible if mouse click on DGV Row(Form2) then automatic calculation depend value what rows
[Code]....
View 17 Replies
Aug 11, 2010
When i use VB6 i get the following outputs
961.605 * 100 = 96161
936.495 * 100 = 93650
929.295 * 100 = 92929
NOW..... When i do the above in vb.net 2005 i get the following
961.605 * 100 = 96160
936.495 * 100 = 93650
929.295 * 100 = 92930
How can i get the same output as the VB results. And i have tired it ! Type conversions, math functions, everything i can think of to get the same VB6 output !
View 8 Replies
Jan 8, 2011
I am getting the error in the code below ....
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim prasha As New Person("Prashanthi", "Acharya")
Dim mallika As New Person("Mallika", "Upadhya")
[code]....
View 4 Replies
May 10, 2009
Public Class Inventory_Edit
Private Sub Inventory_Edit_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'CategoryDataSet.Category' table. You can move, or remove it, as needed.
Me.CategoryTableAdapter.Fill(Me.CategoryDataSet.Category)
[URL]
I added an "edit" icon on my bindingNavigator. When users click on it, a new form will come out and pull out all the data records from the datagridview. Now the strange thing is that when I wanted to edit the data records, when I left the product name blank, I would get an error message saying "Product cannot be blank" - please see above code. But when I left the "Cost Price" blank(same applies to "Sell Price" and "Quantity"), the error message box wouldn't come out, instead, it did not allow me to move on to another textbox, close the form etc until I filled out that textbox with INTEGER. May I know why the error mesagebox would not come out when I entered the wrong datatype?
View 12 Replies
Oct 11, 2011
the testBoolean is set to the value True, but for some reason when debugging, it step through both conditions, so in the end the button1.visble becomes False, but I want it to be set to True.[code]....
View 14 Replies
Feb 1, 2011
I am very new to vb, I know there is an error somewhere, I had an assignment which stated that if a number was < 101 or > 500 and the answer is correct the output should be, for example-123, if the answer was wrong then the message output should be wrong number <101>500. Everytime I type in a number(no matter what the number) and click on my check button I get the output message. If at all possible, can you please assist. My professor gave the following example, but I am still not getting it:
Dim strInteger As String = "52.801"
Dim dblNumber As Double
dblNumber = CDbl(strInteger)
[code].....
View 4 Replies
Aug 11, 2010
When i use VB6 i get the following outputs
[Code]...
View 1 Replies
Oct 27, 2009
I've asked this question before, and so have many before me, i have done extensive research on the topic and stil no help. Maybe this is some kind of secret info. shared only amongst top programmers. Bt how do you really, trully double buffer a form, aside from setting "Double Bufferd" to true, which doesn't work in most cases, I want to know how do companies lyk Microsoft and Symantec, prevent flashes on big applications such Word and Norton.
View 4 Replies
Feb 23, 2010
If I try to display a command line argument that has double quotes around, the double quotes are always stripped off. How can I avoid this?
for example, the argument is "c:xx.txt" and this displays c:xx.txt instead Console.WriteLine((My.Application.CommandLineArgs(4)))
View 4 Replies
Jun 20, 2012
I want to use a value that is pulled from the SQL within the if statement. Ideally i want to do the equivalent of <% If DataBinder.Eval(Container, "DataItem.BookID") == 1 Then%> Is there a way to do this with the correct syntax?
View 2 Replies
Jun 21, 2010
How to combine these two conditions in one section
Private Sub DataGridView1_CellValidating(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellValidatingEventArgs) Handles DataGridView1.CellValidating
'condition 1
' check given value is numeric or charactr type
If e.ColumnIndex = 3 Then
If Not IsNumeric(e.FormattedValue) Then
DataGridView1.Rows(e.RowIndex).ErrorText = " must be a numeric value"
[Code] .....
'condition 2
' check given value is greater than 0 or not
If e.ColumnIndex = 3 Then
If (e.FormattedValue.ToString = "0") Then
[Code] .....
View 2 Replies
Jun 6, 2011
I have and existing .rdlc file where I display the grades of each students as well as the general average. I get general average like
=FormatNumber(Switch(Fields!YearLevel.Value="LC7" or
Fields!YearLevel.Value="LC8",(IIF(Fields!SectionName.Value<>"1st Sec A" and
Fields!SectionName.Value<>"2nd Sec A",
[code]....
I want to display:
"1st Honor" if gen. ave is >=90 but all the subject grades must be >=90 also
"2nd Honor" if gen. ave is >=88 but all the subject grades must be >=88 also
"Third Honor" if gen. ave is >=85 but all the subject grades must be >=85 also
How do I do it?
View 6 Replies
Dec 9, 2011
So I am trying to evaluate 3 conditions in an if statement. Its not working how I would assume it should. I basically want to do this:
vb.net
If PGN = &HEF007E And PGNData(0) = &H58 And (PGNData(1) And &H40) = &H40 Then IgnOn = True Else IgnOn = False
If I write it in that manner it gives inconsistent results. If I workaround by writing it this way it works perfectly:
vb.net
If PGN = &HEF007E And PGNData(0) = &H58 Then
If (PGNData(1) And &H40) = &H40 Then IgnOn = True Else IgnOn = False
Endif
What is the proper way to do this with only one if statement?
View 7 Replies
Jun 8, 2011
Having problem make last if an statement work in the code. the variables in the if statment are doubles but the ide keep telling i need a proceeding if statement. but is already there it is in the last if statement of the code
Public Class Form1
Dim Totals As New List(Of Double)
Private Sub btnclear_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
[CODE].....................
View 4 Replies
Feb 15, 2012
I'm doing a stock Control System as a school Project using An Access 2007 DB and Visual Studio 2010. I'm trying to do an update Query based on two variables entered into comboboxes, I cannot get the VB to accept the conditions for this, Can anyone Help me?[code]I Cannot get the Code to recognise the Last "'", is there a way to do this?
View 7 Replies
Jul 28, 2011
The following code is looking for the phone number of contacts in a database when the column "hoohoo" = 15. However it doesnt keep to this condition, but displays all of the numbers. Am i missing a line that tells it to keep to the condition???
Dim SQL As String = "SELECT *, Phone FROM TblContacts WHERE Hoodoo=15"
Dim myOleDbCommand As New OleDb.OleDbCommand(SQL, con)
con.Open()
[Code].....
View 2 Replies
