What is the best way to pass the four (4) parameters after the applicationName to the application to be launched?
Process.Start ("C:\MyApp.exe",
"CommChannel1",
"DeviceName",
"Language",
"UserName")
I have a string that has 2 sections broken up by a -. When I pass this value to my new page I just want the first section. An example value would be: MS 25 - 25 I just want to show: MS 25 I am looking at IndexOf() and SubString() but I can't find how to get the start of the string and drop the end.
View 2 RepliesCan I do anything more or less with IDictionary? How do these two collections differ?
View 5 Repliesmy code is :
[Code]...
The error is Value of type '1-dimensional array of string' cannot be converted to 'String'.
I want the Function to accept List(Of String), Array & String and similarly return List(Of String), Array & String respectively. The Function simply adds a string (month) to the input collection. I just want to use it for string, array and list with needing to think of conversions.
[Code]...
I'm sure but can't see the answer. Currently going through a string "DO While Not ts_IN.AtEndOfStream" looking for information. This includes then checking another string (while inside the first) for matching reference point for further data.
So within the first loop, I have a second loop "Do While Not ts_IN2.AtEndOfStream". And looping through that string searching for the reference point.
This works initially, but after awhile don't find anything because it is not going back to the start of ts_IN2 string each time loops on the first section.
How can i write a " and it not gets it like a string end/start? Example: Dim test as String = """ MsgBox(test) and that msgbox would display a ".
View 4 RepliesHere is my string: (not real just made up) Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load WebBrowser1.Hide() End Sub Now if I want to repeat that string the ammount of times I say in TextBox1, how do I code that with that string code above?
View 4 RepliesThis code should read the string "34,56,23,74,69" from a process's memory addresses (in this case notepad), right now it works but very slow and I think it even breaks somewhere. My problem is with the ReadProcessMemory function. I can't make it read an entire mbi.RegionSize into the buffer. I tried everything and now, it only reads 1 byte at a time until the mbi.RegionSize is finished then it checks if the text that was read contains the text I need to be found, then it goes to the next mbi.RegionSize. Now, even with notepad which is very small it still takes 10 seconds to find something and I intend to use it with a much bigger program, so it will take like forever. Another problem is that it only finds the string "34". If I put "34,5" it won't work.
Imports VB = Microsoft.VisualBasic
Imports System.Runtime.InteropServices
Imports System.Security.Permissions
Public Class Form1
Inherits System.Windows.Forms.Form
[Code] .....
I'm new to these forums but am really enjoying reading the various posts. I have a question regarding string to date converting. I have the following string from a file I need to convert to a valid DATE in VB, but I am unable to with the attempt's I have tried. The date is: "Thu Dec 13 10:00:06 2007" So I am assuming it is something like this in VB: "ddd MMM dd hh:mm:ss yyyy" The code I am using is the following to test against an array to see if the date is encountered, once it is I want it to convert it to a VB based Date.
[Code]....
I have the code below (found on forums) that should read the string "34,56,23,74,69" starting from the first address of another process till the end. However when I start the project I receive this error :"PInvoke restriction: cannot return variants." With Search Engine for example, the string is found, displayed and changed without any problems. Right now I have a subroutine that searches the string but only if I put the right memory address, and unfortunately the address changes almost every day.
Imports VB = Microsoft.VisualBasic
Imports System.Runtime.InteropServices
Public Class Form1
Inherits System.Windows.Forms.Form
[Code] .....
String s = "test"; String is a class, so to use it we should create an object of it. But rather we just make a reference of it and give it a value. How is it possible and what concepts are used in it. The metadata of String class shows the following :
[Code]...
Basically I have a webresponse stream:dim lol as string = readstream.tostring there is a lot of information within the string but only one link starting with http: located near the end of the string - however there is no constant character point where I can start... (i.e. 38)
I want to extract the link from the string i.e. dog cat plane car [URL]..that is approximately how it looks above - words and url substituted I want to just extract [URL]..I had an idea of parsing the string from http: to the end Then after that splitting the string up again to remove the }], however it does not return anything
I am writing a command line application in VB.NET. This application is calling another one, msxsl.exe, to run an XSL transform. I am using the Process class to do this:[code]What I want it to be able to display the output from this process to the console of my application. I have read several posts explaining this method, but it does not seem to work in this case. The output is an empty string.[code]I have verified that if I run the msxsl executable on its own (i.e. running "msxsl.exe base.xml test.xsl -o styled.xml"), it displays output on the command line. What am I doing wrong?I should note that the msxsl process is currently failing due to a malformed XML file. It is displaying this error message:[code]This is exactly the type of thing I want displayed in the console of my application (or, eventually, a log file.)
View 1 RepliesI have a program that requires a string. The string is 20 characters long. The string also have to be split into 2 words the first word is 12 characters and the second is 8. If the strings is not 20 characters long I get an error. I wanted to know how can I get the program to start back over and let me enter another 2 more words if the string is not 20 characters long. At the moment after I get the string is not 20 characters long error it continues to read the rest of the program but I want it to stop after an error and let me start over from the beginning.
View 3 RepliesI need to be able to strip the following prefixes from product codes as you see I have included a simple query while yes the below shows me the cm im not wanting i cant use replace as it code replace any instance of cm the prefixes are held in the supplire table cross refer with the products table
prefixes are not always two chrachters for example can be TOW
SELECT * , left(prod.productcode, LEN(sup.prefix)) AS MyTrimmedColumn
FROM MSLStore1_Products prod ,supplier sup
WHERE prod.suppid = 9039 AND prod.SgpID = 171
[Code].....
I got an app, which receives data via a R232 port, convert it to a string and on the other side I got a database, where the strings are saved. How can I find a way to compare the string with all strings in one database column and get back the another stringform the same row in this database. I never programmed a database
View 1 RepliesI have buttons generated through code (dynamically). I have to associate an event (the same) to them. I use AddHandler button.click, AddressOf mysub.The issue is that mysub gets a string (mysub(string)), but AddressOf doesn't accept a parameter inside the routine. How can I do this? Using also an alternative to AddressOf.
EDIT:
Public Class Form1
...
Private Sub mysub(ByVal sender As Object, ByVal e As System.EventArgs, ByVal str As String)[code]......
These is the content of my txt file which is saved in D drive in my pc abc,1,2,3..I tried the flowing but it didn't work:[code]I am getting error on this line.. data = line.Split(","c)...it says this line isn't in use anymore or something and that I rather use LineInput but thats asks for filenumber and i don't know what that is. I am sorry but I am a complete beginner. what else can I try? [code]ok that error is gone now but now if I want to add these values to a list box..how can i do that?
View 1 RepliesI have the following web method:
<WebMethod()> _
<ScriptMethod(ResponseFormat:=ResponseFormat.Json, UseHttpGet:=True, XmlSerializeString:=True)> _
[Code].....
I wanted to use HttpGet here so that the result can be cached.
I tried every variation of calling this, but no luck. Is this possible with GET?
I have a field that I display via: String.Format({0:c},amount) This produces the string "$28.28" However, when I try to convert back to a decimal amount, I get an incorrect format exception: amount = Decimal.Parse(amount.Text, NumberStyles.Currency) I also tried it with NumberStyles.AllowCurrencySymbol with the same results. I verified that the value in amount.Text is "$28.28". Am I missing something? Shouldn't these two operations use the same currency symbol and formats?
View 2 RepliesI Ported this code from a code project article in c# called Nscript
heres the code
Base App
Imports System
Imports System.IO
Imports System.Resources
[code]....
Okay Now I only get two errors (I dont know how to solve them)
Error3Class 'BaseApp' must implement 'Sub OnCompilerError(errors() As CompilerError)' for interface 'IScriptManagerCallback'.
And
Error4Class 'ScriptManager' must implement 'Sub CompileAndExecuteFile(file As String, args() As String, callback As IScriptManagerCallback)' for interface 'IScriptManager'.
But What I would also Like to know (as well as how to fix the errors), is would the code work?
I need a regular expression that can validate that a string is an alphanumeric comma delimited string.
Examples:
123, 4A67, GGG, 767 would be valid.
12333, 78787&*, GH778 would be invalid
fghkjhfdg8797< would be invalid
This is what I have so far, but isn't quite right: ^(?=.*[a-zA-Z0-9][,]).*$
Problem: Your task is to take input from the user in string and give the following options to the user in a menu.
1- Find a String
2- Create sub-string
3- Erase a portion of a sting
4- Replace a word in the string
5- Count number of words and characters in the string without spaces.
6- Capitalize first character of each new sentence and convert the rest
of the characters to lower case.
7- Sort all the words in alphabetical order. (Use Bubble sort algorithm to perform sorting).
To perform all the above mentioned tasks you can only use pointers. Create a function to perform every task.
So strings are reference types right? My understanding is a reference to the string in the heap is passed even when you pass the string ByVal to a method.
String myTestValue = "NotModified";
TestMethod(myTestValue);
System.Diagnostics.Debug.Write(myTestValue); /* myTestValue = "NotModified" WTF? *[code].....
And what is going on under the hood? I would have bet my life that the value would have changed....
Im working on a program and I get this "Value of type '1-dimensional array of String' cannot be converted to 'String'." heres the code that gets this error:
[Code]...
I don't understand why the line final.join etc pops up with these errors!! Value of type 'String' cannot be converted to '1-dimensional array of String' And Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated This is my code.
[Code]...
when i transfer the bytes sent by the client program to a string the string length is affected.when i put the bytes sent by the client program to a message box. it returns the corrrect text. but when i check the length it will return 8192 or higher. but the actual size is just 5.
My Code
Dim tcpClient As TcpClient = tcpListener.AcceptTcpClient()
RichTextBox1.Text = RichTextBox1.Text & vbNewLine & "Connection accepted."
' Get the stream[code]....
The following is ment to generate the path to a text file and stream the data found there into an array.
Dim y1 As String
Dim y2 As String
Dim y3 As String
[code].....
I'm trying to code a program but this error repeatedly shows up and I can't for the life of me figure it out EValue of type 'String' cannot be converted to 'System.Windows.Forms.TextBox'. It appears in relation to this code
[Code]...
