I have a program that a textbox pops up for 30 sec. What I want to do is this: Have it go away after 30 sec if the user does not enter anything in it and hit return of click the ok button. But if they DO I want the timer to reset back to 30 sec. I have tried disabling and enabling the timer event--- sending a new interval, and spent some time looking in the Forums.
View 2 Replies
I am using timers in a windows service and facing problem that anytime some exception happens ( say i unplug LAN wire from my computer ) service stops running, What i am expecting is that service should keep on running as i am catching generic exception which should catch the exception on one tick event and again work (next tick)when i plug in LAN wire (i am plugging/un plugging ) LAN wire as this service is reading database from LAN so i want to replicate a failover scneario)
View 3 RepliesI'm trying to validate a few things in a form I'm building. It has a datagrid with clients info (taken from an access database) and a few textboxes where the user can type some search criteria. The thing is that those same textboxes are used to add new clients to the database and to modify a client's information if one from the datagrid is selected, so I made it that the buttons to insert and modify clients are disabled on load and thenevery time the text on a textbox changes ("TextChanged" event) they become enabled. So far so good. But then I wanted to make it so when a client from the datagrid is selected both buttons become disabled again until the text on a textbox changes (to make sure they're adding a different client and not the same one that was
selected).
I tried using the CellClick event from the datagrid to disable the buttons, but since every time a client is selected from the datagrid the info is shown on the textboxes, this triggers the TextChanged event too, and the buttons become available.So, is there a way I can tell the TextChanged event not to be triggered when the CellClick event occurs?
I have a system with 26 buttons but the buttons actaully run the same code; aside from the fact that the index number is used to distinguish between them (es, I know index values are out so I am using the object's name (btnKey1, btnKey2, etc).
Is there any event that occurs for all button presses or do I need to write the same line for all 26 events (actually 52 since I am using MouseDown and MouseUp - will get worse when I want to use the keypress side)?
I am currently using Snarl to generate notifications whenever an event / error occurs in my program. How would I go about coding a native VB notification instead of using a 3rd party program?
View 3 RepliesI have a timer on a page in ASP.NET.
After a certain period of time elapses, I want to disable the timer.
I want to put a static variable in the timers tick event that will track how many seconds have elapsed.
My question is, will this work?
If user X and Y are viewing the page will they both have separate local static variables?
What is the best method of shutting down an ASP.NET timer after a certain elapsed time?
I have a windows application that need to process som quite time consuming jobs. In my first try i did all processing under
the form thread. The result was bad response and update of the form due to the heavy jobs.To get around the problem with bad response from the form i created a new class "processing" where i put all the data processing. Then i instanciated a background worker where i in the "doWork" sub created a new instance of "processing".The "processing" class creates a timer from system.timer, and the timer drives the processing.On the Timer event Elapsed the timer starts a new thread from the thread pool.
My problem is now when i want to asynchronously close the background worker (with the corresponding function call what ever it is called ...) there is still a timer thread out there that causes exceptions for me.
1. How can i close my background worker and at the same time have the timer to be stopped?
2. Is there a way to synchronize the timer event so that the timer executes from the background worker thread?
3. Is there a better approach for me to adapt?
I want to create an array of timer in vb.net. My problem is that how will i raise the tick event for a particular timer, say mytimer(x).tick and inside the tick event there is also a button, say mybutton(x) which changes location every interval. for example:
public class blah
dim mybuttons(20) as button
dim mytimer(20) as timer
private sub form_load(....) handles me.load
for x as integer = 0 to 20
[Code]...
i dont know what to do next, all i want is to pass the button mybuttons(x) to mytimer(x) tick event, in which their index number are the same. i want to create one timer per button. how to do that? please help me and post example codes. i've researched the net but i cant understand passing variables, addhandlers, etc. i'm just new to programming object oriented.
Eg. ""vb.net" timer event trigger on purpose". This application is meant to run at all times to download a web page every minute. To avoid freezing the UI, I read that the best solution is to move the code from a While/Sleep loop to a Timer that will be triggered every minute. The problem I have, is that the user must wait for a minute before the event is triggered:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Timer1.Interval = 60000
Timer1.Enabled = True
[CODE]...
Is it possible to force this event to occur instead of waiting for it?
what the line of code is to reset a Numeric Up Down control box to zero?
View 8 RepliesA form has many buttons. One of those buttons contains code to update the TableAdapterManager. One of the many TextBox controls has code in a Validating event handler. There is code to make sure a US phone number is formatted properly.If the user tabs out of the TextBox the Validating code works perfectly and show a message to the user if the phone number is not properly formatted and the focus is place in the offending TextBox.If the user clicks on a button that has code to update the TableAdapterManager the Validating code fires but instead of focus remaining on the offending TextBox, the code in the button Click handler also fires.
I would like to stop the button code from firing.Here is the code for the Validating event of the TextBox:
Private Sub TextBoxPrimaryPhone_Validating(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles TextBoxPrimaryPhone.Validating
' Make sure the phone is formatted correctly.
[code]....
What additional coding to I need to include so focus remains on the TextBox?
im writing a little app to enable authorised staff to reset student passwords but having a few issues. . I am no expert and am now stuck The following code does not seem to error but also does not reset the password! Private Sub bt_pwd_reset_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_pwd_reset.Click
[Code]...
I already created a button "enjoy button" that i want to move in a form when the "timer start button" is clicked. how do link the timer to the "timer start button" and make it move?
this is what i tried so far..then am blank first
[Code].....
i want to execute different subs at each tick , is that possible ?
View 1 RepliesWe have a question regarding VB.Net 2008. We are used control array in vb.net and third party timer controls. When handle received from external application to timer control event procedure, after this form becomes blank and controls disappear. What we have to do to persist the controls.
View 1 RepliesI already created a button "enjoy button" that i want to move in a form when the "timer start button" is clicked. how do link the timer to the "timer start button" and make it move?this is what i tried so far..
blankfirst-------------------------------------------------------------------------------Public Class MainForm Dim DX As Integer Dim DY As Integer Dim X As Integer Dim Y As Integer Dim Counter As Double Dim Y1 As Integer Dim Y2 As Integer Dim X1 As Integer Dim X2 As Integer------------------------------------then-------------------------------------------------------------
[code]....
I'm trying to enable a timer from a SerialPort_DataReceived event. I can see that the timer is enabled, but the event does not fire. It's rather simple, but I need some help understanding why it doesn't run the code in TimerWait_Tick.
[code]...
I used a timer in my user control now when Timer_Tick event is fired I want to raise an event like Ticked. I created:
public delegate sub myDel()
public event myevnt as myDel
in Timer.Tick
I used raiseEvent myevnt. I also raised the event from a button click. This event is handled in a windows form where the control is used, My problem is event is firing when the button is clicked but not firing from the timer.tick. Is there any problem from Timer.Tick.
I have a For Loop, how can I convert that by using Timer event. I want to use Timer so I can add a 5 sec, 10 sec and 15 sec pause (interval) for each every loop. [code]
View 1 RepliesI'm a starter in VB I just need to Know how to add elapsed event to timer in VB 2005 The timer has only Tick event
( if that not in vb 2005 what version of vb that supports the elapsed event )
I am currently developing an application in which I would make a form full size automaticly.On the location where I set the time parameters, lets say, I want an event to occur every 2 hours, in which the event would be a form becoming full-sized and, on that form a clock which would show that the form will resize on its original state after lets say, 15 minutes.And also I would like to disable the Windows Start keys.I tried some codes but they were for an event if the key is pressed.For this I need the keys to be disabled as soon as I start my application.For the full size form I have used this code:
Me.Height = My.Computer.Screen.WorkingArea.Height
Me.Width = My.Computer.Screen.WorkingArea.Width
Me.WindowState = FormWindowState.Maximized
Me.FormBorderStyle = Windows.Forms.FormBorderStyle.None
I already created a button "enjoy button" that i want to move in a form when the "timer start button" is clicked. how do link the timer to the "timer start button" and make it move? this is what i tried so far..then am blank first
Private Sub MainForm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[CODE]...
I'm trying to create a simple media player that will scan a directory for certain filetypes, add them to a playlist then play a random playlist entry - changing every x seconds.I figured this would be simple in VB and, to an extent it was. I have the code running that chooses the directory and plays the random file.I just need to now make this repeat every 30 seconds or so.I have all the coded attached under the sub for the 'open' function of the player so it's quite flat. I think I need to use a timer here, to trigger the routine to pick and play the media every 30 seconds?In doing this I think I need to break the variables out of the function I currently have as they need to be shared between the timer loop function and the central 'creating file list' function.
I'm having trouble - I'm no coder (as you'll tell!) and although getting this far was easy I'm now (I think) bumping into threading / variable scope issues which are a bit of a brick wall.I've tried making the variables public / global by declaring in the class rather than the sub but I get errors at runtime. Presumably because of how I'm creating the windows media objects? [code]
Why after you pressed the button Button1, this application crashes without considering the event timer1??
Public Class Form1
Public timer_event As Boolean
Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
timer_event = False
Timer1.Interval = 3000 '3 sec
[Code] .....
This application is meant to run at all times to download a web page every minute.To avoid freezing the UI, I read that the best solution is to move the code from a While/Sleep loop to a Timer that will be triggered every minute.The problem I have, is that the user must wait for a minute before the event is triggered:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Timer1.Interval = 60000
Timer1.Enabled = True
[code]....
Is it possible to force this event to occur instead of waiting for it?
Is there a way to adjust the timer event of the default splashscreen?
View 1 RepliesI'm developing this procedure using a timer object. The thing is the procedure is not in the timer's event procedure but I want it to depend on the timer's interval when executing, it's just not calling the timer procedure. How can u declare objects and use their event procedures in code.
View 2 RepliesI want to check the state of a certain key, but only inside timer event. So my sub will be something like.......
Private Sub Timer2_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer2.Tick
Need code here along the lines of an old fashioned... 'If Input="Q" then......"
End Sub
I'm not sure how to check for keyboard input except for inside a 'Keydown' event.
I am attempting to create a timer that will activate a tick event every 1 second until stopped by an "If" statement. The tick event should then drive a clock measuring time in units of hours, minutes and seconds. The if statements handle the time readout, timer stop and activate another form after a set number of hours have elapsed. I have tried several different methods and while my application is running, it does not add increments to the integers representing the time units, refresh the displayed time units, or perform any of the timer related functions. I assume the cause is that I just don't know as much as I think I do (which isn't much)
Here is the applicable code:
Imports Microsoft.VisualBasic.ApplicationServices
Imports System.IO
Public Class SessionManager
[Code].....
I an trying to modify a queue within the tick event of a timer. Is this even possible? A sample follows:
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
Dim NewQueue As New Queue(Of String)
NewQueue.Enqueue("alpha")
NewQueue.Enqueue("beta")
[code]....
create a looping display (first "alpha", then "beta", etc.). What's missing? Also, why can I declare the Queue outside of a sub, but I can't fill it there as well (enqueue)?
