Once the Print Button is clicked, the form textboxes clear as intended, table data appended - ready for the next report data entry.
However, I would like to have the cursor return to the 1st textbox on the form which is assigned TabIndex number 1. (without re-loading the form)
First of all I want to thank "codeorder" for sharing me this code. Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click
[Code]...
Any hunk of code that loops trough the windows form controls array, and based on top/left to bottom/right, resets the TabIndex property? I've mashed a huge form together and expect my user community to want to move things around, and I don't want to have to fool around with this over and over again.
View 6 RepliesI am building a GUI for a touchscreen panel using VB2008 and am trying to set up a password change screen. I have an on-screen keypad set up so the operator can use it to enter the new/old password. How do I return the value from the key pressed to where the cursor is located?
View 8 Repliesi want to set tabindex for datagridview cell how to solve this problems
View 4 RepliesI have a form with 6 buttons, if I select the form and hit TAB it starts at TabIndex 0.When I keep hitting TAB it goes to TabIndex 1, 2, 3, 4 and 5.After another hit on TAB it should go back to 0, instead it goes to 3, 4 and than 5 again and again.
View 1 RepliesLets say i have 2 button, button1 and button2 , and and tabindex of 1 and 2 respectively . So my problem is , how can i access to particular button and set the button.enable = false by using tabindex?
For example , i have an integer of 2 , then it matches the integer with the tabindex , then it will disable the button2 .
Is there a way to set the enabled property of a combo box using the tab index?
In my program I have two combo boxes next to eachother. When a certain option is selected in the first combo box, I want the second to enable itself. Obviously this is easy to do by using combobox2.enabled = true but I have 10 rows of boxes that need to do this and I want to put all the functionality into one sub. It's possible to read the tabindex into a variable by using VAR = sender.tabindex and then add 10 to that variable (The box that needs to be enabled will always have a tab index of sender + 10) but I can't figure out how I'd use the tab index to enable it. If only I could just type sender.tabindex(+10).enabled = true
I have a calculator like program which has a function to export a string ('StringBuild') to notepad .The process start OK but it has a funny problem. When I run Process.Start it also keept running a sub that I had linked to one of the calculator buttons.I played around with the code but now it runs a hyperlink that I have on the calculator. I even tried adding an empty, hidden, button as the last item on the tabindex to see if that would work but it hasn't.
Process.Start("Notepad.exe")
SendKeys.Send(StringBuild.ToString)
i am working on Scrollable form, when i am trying to print this form with PrintForm object its printing only the showing part not all the form this the code which am using. Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click Me.PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable) End Sub
View 7 Repliesi'd like to know the current cursor but out of a form, in all windows.i've done a litle app with a text box and a checkbox. when i click to the check box, the current cursor is displayed in the textbox1.[code]the current cursor writen in the textbox1 is correct when the cursor is in the form, but when the cursor go out of the form, in a other windows application, the textbox1 didn't write the current cursor.
View 3 Replieshow can i make my cursor to jump to the next textbox after i type the digit
View 3 RepliesThis VS010 solution is not providing my intended outcome as a custom override of a 'crosshair' or 'reticle' cursor e.Graphics.DrawPath() is the function that isn't working. This
WORKING solution demonstrates how it's supposed to work. The additonal PictureBox added to a Panel is, for reasons I don't understand, not allowing the 'new' cursor to appear.
Option Explicit On
Option Strict On
Imports System.Drawing
[Code]....
How can i add a custom Cursor to my Form with Resources? if tried like 3 ways but none of them worked or made my programm crash
View 35 RepliesAny way to get the cursor style outside of the vb form?
View 1 RepliesI am currently creating a program that will change the cursor's image and let it stay like that until the user clicks use default image button. I do not mean like
Me.Cursor = New Cursor("C:\cursor.ico")
I mean as in even if the user's cursor leaves the form, it will still display the custom cursor only.
I have got only this much done so far, and the code is not 100% working either.
Private Sub ChangeCursorButton_Click()
System.Windows.Forms.Cursor.Hide() 'only hides the cursor when your mouse is on the form, need to fix that
Me.Cursor = New Cursor("cursor.ico") 'had no choice but to use this for now, even if when your cursor is out of the form it will revert to the original.
[Code] .....
The code only works if your cursor is on the form. If its not, it doesn't work as intended.
I need the code to work that the cursor will hide the original cursor and let the custom cursor I declared shown.
I have a program that reads pixel colors in other applications, I've got the program working correctly but trying to hovor your mouse over a single pixel on the screen using the standard mouse "Arrow" pointer is a little difficult. I've created a custom cursor that is a cross hair of sorts that makes it easier to target specific pixels, is there a way to change the mouse curse to a specified cursor when the mouse is NOT over the controlling form?
[code]...
I have a form displayed in my app and what I want to do is detect when the user clicks outside of the form and close it, however I am not sure how to do this?
View 1 RepliesI am trying to use a windows form as a custom contextmenu which is fine as I have done a form with translucent background colour. However the problem is that I am having problems displaying the form at my cursor position. I have a mdi chaild form in my app and when I right click I want to display my custom contextmenu form at the point where I right click in the mdichild form. The only other thing is that I want the middle of the form to be displayed at the cursor point.
View 2 RepliesHow to set the cursor of a windows form using VB.NET?
View 1 RepliesI have a form like this What I want to be helped is whenever I click the Button, the mouse cursor will point on the Label, then the Textbox or some more items of the Toolbox.
View 11 RepliesI am working on a project where I need to hide the mouse however the Cursor.hide and the ShowCursor API (Which doesn't even work) will only hide the cursor on a specific form. How would I go about hiding the mouse everywhere? (Desktop/Internet Browsers/etc...)
View 2 RepliesPut the cursor in a Textbox when I load a formla
View 4 RepliesI need a code that when put in a timer will create a cursor were your cursor is and then leave it there. So its like a place marker to let you know were you were when you clicked.
View 2 RepliesI wonder how i could do so a form gets unclickable. I am doing a crosshair and when i test it out and put it on its place then when i trying to shoot the program inactivates.how i can make a forms startposition custom?
View 7 Repliesi'm trying to work on a seamless 'help' system on my new application, so that throughout the application, people can hover over different aspects of it to display a small window of help, which follows the cursor until the user leaves the aspect they hovered over. I have had a look around and can't find any good code for this, and tried some myself without success.
View 4 RepliesI am trying to use the printdocument object to print off a windows form, but at the moment, the printer just prints a blank sheet.. the code is executed when the print button is clicked:
Private Sub btnPrint_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPrint.Click
Dim printDialog1 As PrintDialog = New PrintDialog
printDialog1.Document = PrintRewardsReceipt
[code]....
I have a user control, and want to be able to update its cursor while it is disabled. For example, say that I have a user control whose cursor is Default. The below code works ONLY when the user control is already enabled; if it is disabled the below code doesn't work and the cursor remains Default: Me.MY_USER_CONTROL.Cursor = System.Windows.Forms.Cursors.WaitCursor
View 3 RepliesI'm creating an app where I don't want to allow the cursor to leave the form, even when the mouse moves.Would it be something to type into pongMain_MouseLeave ? Something like Cursor.Stop () is all I
View 2 RepliesI am trying to use a windows form as a custom contextmenu which is fine as I have done a form with translucent background colour. However the problem is that I am having problems displaying the form at my cursor position. I have a mdi chaild form in my app and when I right click I want to display my custom contextmenu form at the point where I right click in the mdichild form. The only other thing is that I want the middle of the form to be displayed at the cursor point.
View 1 Replies
