Running A Console Application As A Windows Service?
Jun 29, 2010
I have a console application that is ready to be used as a windows service, I have been looking around for a couple of hours and tried many of the tutorials out there but none of them worked with me.
The closest one was: [URL] but it didn't go into the process of doing it. I converted that code to VB.NET but then I don't know where to go from there. I have the Module1.vb which runs my console application all ready to be used.
show me a way to use my console application as a service, I tried using the InstallUtil feature but my app never showed under "services".
View 8 Replies
ADVERTISEMENT
Jul 14, 2011
i have a Windows service that is hosting a WCF service through net.tcp and this is working great. I have also created a WCF service application. I am trying to add the net.tcp service reference to the service application. Then I add it to the GAC that goes ok but if I try to RegAsm the WCF service application to allow it to be called from Server.CreateObject I get the error:
Warning: Type library exporter encountered a type that derives from a
generic class and is not marked as
[ClassInterface(ClassInterfaceType.None)]. Class interfaces cannot be
exposed for such types. Consider marking the type with
[ClassInterface(ClassInterfaceType.None)] and exposing an explicit
interface as the default interface to COM using the
ComDefaultInterface attribute.
It does not work. I have tried to call it through a class library but this does not work either as the end point is not set correctly.
View 1 Replies
Sep 22, 2011
I have a .Net Console application which displays thousands of lines on the console each minute. I want to convert it to a Windows Service, however I still need a way of viewing these messages. There are far too many messages to write them to the event log or even a standard log file. I was wondering if there were a way to write a systray app that could simply intercept these messages from the service and display them in a console window. I have no need to save older messages, I only need to see current activity.
View 2 Replies
Oct 18, 2011
We have made a console application in vb2008/2010. Is there any possibillity to make from this a service?
View 1 Replies
Dec 17, 2010
I am new to Visual Basic and i started to write a console application. I it working fine by now, but I tried to execute a command like shutdown -s
I tried that by writing console.writeline("shutdown -s")
but all it dows it displays the text and does not shutdown the computer. How do I code that correctly???
View 4 Replies
Feb 26, 2010
I have a console application and I have figured out how to type in the command window with Console.WriteLine() but i need to run a command (ex. net user) then wait for a response and type another command, for some reason I cant figure out how to type the command and automatically press enter without closing the window. I tried Console.WriteLine("net user") but all it does is write "net user" in the command window so I used My.Computer.Keyboard.SendKeys("{ENTER}", True) after Console.Writeline and it just wrote "net user" then exited the window. Is there any way to run a command through a console application? if so how would i do this?
View 6 Replies
Aug 27, 2010
We have a windows service running under a network account that calls and runs an ActiveX exe. The exe is running under the local system account, not the network account of the service.
View 1 Replies
Jul 5, 2010
The following VBScript code runs smoothly when I use cscript and/or VB console applications:
[code]...
For some odd reason, the VBScript code only works on cscript but when I call in the code to the service, it doesn't work...
View 3 Replies
Jun 5, 2011
I was thinking I could make a console application that would have a FileSystemWatcher - watching for a .BAT file being created in a folder - and when it sees that file it does a PROCESS.START on it.
View 3 Replies
Aug 1, 2011
I am new to Visual Basic and i started to write a console application. I it working fine by now, but I tried to execute a command like shutdown -s I tried that by writing
console.writeline("shutdown -s")
but all it dows it displays the text and does not shutdown the computer. How do I code that correctly???
View 3 Replies
Apr 1, 2012
I was thinking I could make a console application that would have a FileSystemWatcher - watching for a .BAT file being created in a folder - and when it sees that file it does a PROCESS.START on it. But I'm seeing that a console app doesn't continue running.
Imports System.IO
Module awcWatcher
Sub Main()
Dim fsw As New FileSystemWatcher("D:ACS DesktopAWCeportingstaging")
fsw.NotifyFilter = NotifyFilters.FileName Or NotifyFilters.LastWrite
[Code] .....
How would I go about making this wait and then wait again and again and again?
View 9 Replies
Dec 4, 2009
I have a windows service written in .net framework 2.0. This service installs and runs perfectly fine on both XP and windows server 2003.We have a new 2008 box that we are migrating over to, so need to get this windows service up and running.When i try to 'start' the windows service on the 2008 machine, i get "Windows could not start the <service> service on local computer. Error 1053: The service did not respond to the start or control request in a timely fashion."I have searched everywhere looking for an answer, and all I could find was a fix attributed to .net framework 1.1 for this same error. That; however, is not applicable here, as the service was written in 2.0.
View 3 Replies
Feb 21, 2012
'the below just creates a text file for my own sanity. Both files get 'created so I know the service is running as it should and not crashing. 'timer ticks every minute so if I delete the files once they have been 'created, they get recreated
Dim TextFile As New StreamWriter("C:LRQuadrant" & "test111" & ".txt")
TextFile.WriteLine("blah blah blah")
TextFile.Close()
I have a file called john.vbs. It only contains the following vbscript
'DIM objShell
'set objShell = wscript.createObject("wscript.shell")
'objShell.Run("CMD /C dir /s > dirlist.txt")
If I run this through command prompt, it does as I'd expect.'Nothing happens when the below code gets run.
Dim foo As New System.Diagnostics.Process
foo.StartInfo.WorkingDirectory = "c:"
foo.StartInfo.RedirectStandardOutput = True
foo.StartInfo.FileName = "cmd.exe"
[code]....
View 4 Replies
Aug 19, 2010
When running a console application, the dos window disappears without asking for a "press any key to continue", why? What setting in 2010 is not set correctly?
View 3 Replies
Jul 23, 2010
I have written onw windows service..in that i have logic that is some part of code need to execute on certain time.. my service is running in every one min..
[code]...
But iam facing prob that it is considering seconds while running so can not compare above time..
View 4 Replies
Feb 25, 2010
I need to have a windows service that capable of monitoring constantly whether my application is running or not. If not, the windows service will RUN it for me.
View 4 Replies
Jun 30, 2010
I wanted to know what are the risks of opening up a socket server on a specified port? Right now I have it limited to only accept requests from 1 specific IP to that port and all the other ones get rejected (using the windows firewall), is there a way to implement an authentication or anything else so I can allow it to be accessed from any IP worldwide yet have it secured?
View 1 Replies
Sep 14, 2010
I am trying to use the System.Diagnostics.Process class.I have the following Windows Forms application. It consists of 1 Button and 1 TextBox. The only code is for the button click event as follows.
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim myProcess As New Process()
[code]....
View 2 Replies
Feb 7, 2010
I have a fully functional multi-threaded VB2008 console application that I need to convert to a windows forms application. I am doing this to add additional functionality at a later time. How would I go about doing this?
View 9 Replies
Sep 4, 2010
I'm trying to run an instance of the Azure Blob Storage in the Azure Visual Studio 2010 development environment, but keep getting the followingrror:System.InvalidOperationException: Not running in a hosted service or the Development Fabric.The stack trace is pointing to these lines:
Imports Microsoft.WindowsAzure
Imports Microsoft.WindowsAzure.Diagnostics
Imports Microsoft.WindowsAzure.StorageClient
[code].....
View 2 Replies
Apr 13, 2012
I have a console application code below. I am trying to convert this to a windows based form application but I don't know where to start. This code asks you to input a website and then it gives you the IP address for that particular website the user enters. All the code works fine but I want this in a windows form application.
using System;
using System.Net;
using System.Net.Sockets;
class GTest
[code]....
View 11 Replies
Aug 11, 2009
Okay so basically I want to see if I can make an windows application or just a console application in VB.NET that will verify an MD5 Checksum. I have no idea how to start this out, but I have the ideas of what I'd like to make it.
[Code]...
View 14 Replies
Apr 7, 2011
I have some shared code I need to use both in a WinForm and a service. How can I test if my code is running in a service, so I can avoid problems with modal dialogs.
View 2 Replies
Jan 19, 2010
I'm porting code that I wrote for use in a Windows Forms application to a Windows Service, but for some reason, the code that worked in the Windows Forms application is now throwing errors in the Service
View 7 Replies
Sep 7, 2009
Is there a way to convert a windows form application into a console application in visual basic?
View 2 Replies
Nov 24, 2010
We currently have +- 20 different console application developed in VS2008 and running at different scheduled intervals, all controlled by Windows schedular. The problem we have come accross is that it is becoming increasingly difficult to manage and maintain these console apps. In some instances a console app will just fail or never run to start with and this creates a lot of problems. In many cases one console app is dependant on another and if 1st one fails well...you see where this is going.
I am looking for a new solution that will help us to trace, debug and manage these console apps better. We are preferably looking for a gui front end, maybe windows app where we can set the intervals for them to sun and view some error reports if they did not run.We are port all the code for the console apps to which ever new appliocation we develop.
View 4 Replies
May 15, 2012
I have seen this happen before but am not sure how I resolved it in the past. On runtime the controls of my form change from the windows 7/vista format to an older version format as shown in the attached image.
How to display the controls in the format on the left (new windows format)
View 1 Replies
Aug 17, 2009
I need to run my console program which is made in vb.net where I will use my windows forms to run the console app?I have done this but it doesn't work.[code]I've tried to add as Existing Item or Project but it doesn't work..
View 3 Replies
Nov 16, 2009
I created a windows console application because it needs to do some things at windows start up. However, in very rare cases I need to ask the user for some information, so I need to show a form. I created a form and went to my application properties. There I selected Windows Forms application as the application type. I call my form with the .Show method but it doesn't show up.
I expected this, but I have no idea how to solve it.
[EDIT]Just found out .Show does show it but only for 0.00001 seconds. I use showdialog now. Is this the right way to do it?
View 2 Replies
Jun 10, 2010
I have created a Windows application (in VB .NET). Now I want it to run from Console too.However, when i run it from console, i don't want to should the windows forms and also want to run some specific tasks.
View 1 Replies
