I was just curious as to whether after you have added all of the Parameters to the SQL Command Parameters Collection. Is there a convenient way to iterate or loop through the Parameters and make Assignments to the SQL Command Parameters Values Property?
View 2 RepliesI want to add a new select command to my dataset. To do that, I have added a new partial class to my project. Because we have to use partial class if we want to extend generated dataset codes. [code]...
View 3 Replieswe have 3 classes:Class S, class A, class B / A and B inherits S.A has a property A1 and B has a property B1.we also have a collection of objects that has A and B objects.ex.
Dim c as Collection = new Collection
c.add(new A)
c.add(new B)
Now we want to make a general object that will read from the collection.
ex .
Dim obj as S
how can we cast obj in order to see properties A1 or B1 according to the class;
suppose I have a collection of objects of different classes (like controls in a form), and all of their classes have a MyMethod extension method. How do I have the appropriatemethod be called for each object, depending on its type?or example,
For Each ctrl In Me.Controls
'call ctrl real type's MyMethod
Next
[code]....
i've researched and written a generic class (all my objects are the same structure) and i'm was just working on the collection using a hash table but i've just read a comment within (url...) in this forum...that we shouldn't use hashtables at all with vs2008.i actually need and object collection that contains other object collections within them.the application i'm trying to write is relatively simple (but i'm new to vb.net)it keeps track of the time for weight lifting training/workouts.a workout consists of 'say' a bench press, military press, curls, dead lift, etc within the "bench" you have 1,2, or 3 sets (how many times you do "the bench", within a set you have 1,2,3 or 4 lifters, each lifter does reps.then it starts over with military press..i guess i could base it on a treeview type structure (with parent child type relationships) but i usually think in terms of collections it appears that a collectionbase has no key and i'd have to keep track of them on my own...
View 2 RepliesI'm trying to figure out the lifetime of the tmpTabPages in the following bit of code. Lets assume the form has an empty TabControl named MyTabControl, that there's a collection of strings called NameCollection.
[Code]...
So I have a collection of Razzies created from a Collection of Bloops. I retrieve this collection using a Linq query. Reference:select-certain-properties-into-another-object for the query.I would like to know if it is possible to run a method on all of the newly created Razzies before returning the collection, or even right after, just without using a for-loop.
I tried ths:
Dim results = From item In bloops _
Select New Razzie() With _
[code].....
I'm implementing a customized Graph algorithm in vb.net, and I'm having the following problem:
Supose the code:
dim col as new collection
dim myC as new system.collections.genericList(of myClass)
dim obj1 as new myClass
dim obj2 as new myClass
[code].....
'In the next statement, the myC2 inside col collection will be decreased to contain 'only obj1, like myC. I supose this is for myC and myC2 contains only a pointer to 'objects obj1 and obj2 as well col contains pointers to myC and myC2 myC.remove(obj2)'The problem is that I have to only copy myC to myC2, like a ByVal argument in a function,'instead a ByRef argument, in order to mantain a copy of objects in myC2 while these 'objects should be removed from myC. How should I do it?
Thought I had got this sorted earlier but unfortunately not. A property in a class is a collection of objects.
[Code]...
I have a question. I have a class of Cars that I need to display in a simpli-ish string if they will be sold or not base on their number.
[Code]...
I'd like to display a simple string like this:Cars to be sold: 1, 3-5, 7-8, 11, which is based of the .Sell value.Is there some kind of heuristic to create this kind of string in .NET or is it just a bunch of for/each and if/then and redimming of arrays?
I am trying to maintain a total for multiple collection objects in a class. When I create a new object, it resets the total to zero, only adding the current value being passed to the function. I have tried to use a static variable, create a second variable to hold the old total while adding the new value. The base class holds the total value, while the sub class creates the new object that holds information. I am passing the new value to a function in the base class adding the new value to the total when each new record is created.
[Code]...
i have a sql query that can bring back a large number of rows via a DataReader. Just now I query the DB transform the result set into a List(of ) and data bind the Grid to the List.This can result occasionally in a timeout due to the size of Dataset. I currently have a three teir setup where by the UI is acting on the List of objects in the business layer.
View 3 RepliesI have an object of type Dictionary(Of Int16, Polygon) and which contains sometimes up to 15 or so Polygons that i am creating bitmap files with the Polygon. This can take like 20 seconds sometimes so i was trying to pass the full Dictionary to background worker as an argument but i get an issue when trying to access each individual Polygon inside of the Dictionary because the Polygons still belong to the UI thread. How can I access the Polygons inside the Dictionary with the backgroundworker?
Dim worker As New BackgroundWorker
AddHandler worker.DoWork, AddressOf MeasurePolygons
AddHandler worker.RunWorkerCompleted, AddressOf WorkerCompleted
worker.RunWorkerAsync(PolygonCollection)
that is how im calling the thread. PolygonCollection is the Dictionary(Of Int16, Polygon) that contains all the polygons that i will be creating a bitmap file out of.
I'm having problems doing a sort of a custom collection. The collection is Device Classes which is a collection of Device Class. My sort does not produce an error but the treeview control shows nothing. I am not sure what I am missing. I'm guessing just a simple sort won't work here but I don't know what I'm missing in my code. Here's the code that creates the collection
[Code]...
Simply sorting the treeview will not work because it throws off the display of related info for a given device in listview controls. The collection itself needs to be sorted before the data is added to the treeview.
I need to be able to read a variable that is coming from the dos shell "sort of". We run this app that is supposed to create a word document.In some of the old school versions of word you could pass a command line parameter of /N to winwordto autocreate the file. That doesn't work in 2007 so I'm trying to write a vbscript to take it's place. I did the same in powershell and had not problems, it just recognized the variable.
'Command line arguments
Set colNamedArguments = WScript.Arguments.Named
strHelp = colNamedArguments.Item("?")
[code].....
trying to pass an index as a paramater through the use if an addhandler. I know that the signatures have to be the same so its not going to work. What are my options?
Dim n As Integer = 64
Dim tmrTimer(n) As Timers.Timer
Sub startup()
[code].....
I have a GUI which allows the user to select a report to view/edit. When the user selects a report, it shows the Items in the report. The Item has many properties - most of which are binding properly. One of the properties is Owner, and this is bound to a ComboBoxColumn.
Report
Items
Owner
I have done something very similar to this a few times and had no problems when I set the DataPropertyName, DataSource, ValueMember, and DisplayMember. The only difference is that this time instead of the Item type having an OwnderID it actually has an instance of the Owner object.giving the items bound in the list a self-referencing property that allows them to return themselves for the purposes of setting the ValueMember.However, When I bind it this way:
OwnerColumn.DataPropertyName = "Owner"
OwnerColumn.DataSource = ownersBindingSource1
OwnerColumn.ValueMember = "Self"
OwnerColumn.DisplayMember = "OwnerName"
I get a lot of errors like: Unable to cast object of type 'System.String' to type 'Owner'.
and:
The following exception occurred in the DataGridView:
System.ArgumentException: DataGridViewComboBoxCell value is not valid.To replace this default dialog please handle the DataError event.I was able to get around some of these errors by binding it like this:
OwnerColumn.DataPropertyName = "Owner"
OwnerColumn.DataSource = ownersBindingSource1
and also by making the ToString function on the Owner display the OwnerName property. This seems pretty hacky though - and I think I'm misunderstanding something fundamental as it still does not function properly.
I have an error while using a collection that has been stumping me for years.I wrote a class to allow users to write equations in a txt file using RPN (stack based notation).The class runs through a select statement while reading the equation and then ends up with a final number as the answer. I have a collection to place these objects in for easy reference. For whatever reason I get random object reference not set to an instance of an object errors when there is nothing in the program that would remove objects from the collection, kill objects, or change the collection in any way. It is possible for one thread to call the calculate function while another thread calls the CurrentValue property. I'm not sure if this could be causing the error, but once it happens I get an error every time the program enters that code until I run out of memory.
[Code]...
I need to Store Objects with Key like:
Key: <Fontname & FontSize> / Object: <Font Object>
Example content:
ArialRegular8 | <Corresponding Font Object>
ImpactItalic10 | <Corresponding Font Object>
TimesRomanRegular12 | <Corresponding Font Object>
These font types come from an external library, the real type is DocumentFont, I prefer not to store just values and recreate the font object later, so I need to store the object, and i want to be able to call Contains() later without looping. like for example Dictionary (of T Key, T Value), is this the best option? Also, to be able to call Contains(), i will have to overload function Contains() using an Interface or this is already built-in in some Collections / Dictionaries when using a String as Key?
I created a custom class for a custom object. I instantiate like so[code]...
Now, I have two problems. First, right now this is just overwriting the same object properties, again, and again. I need to somehow dynamically name the object. Then, I need to place these objects in an array so I can iterate through them...
I've got a multi-threaded app - that is using a global COLLECTION of objects.I'm starting to think that objects - when copied to objects - are really just reference pointers to the "single object" in memory - as they would be in JAVASCRIPT (too many languages At any rate - this code - when taking the object from the collection to work with is it making a new object to play with or is it working the single object that actually resides in the collection?
[Code]...
We use a custom collection derived from CollectionBase to store our Business objects
[Code]...
I've done a little bit of LINQ but I almost exclusively return some elements from a collection based on some criteria. Now I'm trying to do something similar; let's say I have 50 winForm Controls in a collection - I want to set the .Visible property = True based on the controls name.
How would I do that? Below is my failed attempt.
myControls.AsEnumerable.Select( Function (myControl as Control) ( myControl.Visible = (myControl.Name <> "Hidden")) )
It compiles and even executes but does nothing.
I'm confused with this piece of code listed below. This code calls the update method of the dataadapter object to save the changes made to the dataSETback to the database itself. What I don't understand about this code is that it creates an update command(cmdUpdate), insert command (cmdInsert) and delete command (cmdDelete). My understanding is that the update method saves the changes back to the database. So I don't understand why the author creates these additional commands.
View 6 Repliesjust hoping that someone may be able to point me to some information where I can create VBA objects in vb.net (I am using VS2008). For example, I would like to create a new object in VBA with the command (Dim x as Matrix) where 'Matrix' is an object with various properties and methods.
View 15 RepliesIm considering making my own command line interface with custom commands etc. I was thinking the following objects would be sufficient:
Textbox - for input
Rich text box - for showing processes and output
Button - to insert input
If it can be done, how can I provide line breaks in the output on the rich textbox e.g.
line1: input instruction
Line2: <cp><textfile.txt>
Line3: I/O error, file not found, check file root.
My version of CLI will have no integration with the windows CMD.
My app currently uses both SQLExpress and SQLCE, depending on the choice of the user.In my database class I have non query command objects for the CE connection and non query command objects for the express version.
Essentially, this is duplicating code as Parameters.Add etc. has to be repeated on both objects.Is there a way just to add do it once on a common object?
Dim MyConnection As SqlConnection
Dim MyCEConnection As SqlCeConnection
Dim MyNQCommand As SqlCommand
Dim MyCENQCommand As SqlCeCommand
I'm going through a book which is teaching me some basic coding principles of the language. The current section is detailing how to set up a master child form using two tables linked with a foreign key. The master table is displayed as a number of text boxes, and below is a grid with the child table which shows related records to whatever master record you happen to be checking out. At the top of the screen are the default navigation controls that are added with the grid. The master table is named Person and the child table Book. They are linked using a foreign key and have cascade set up on them.
The book informed me of the code required under the save icon on the navigation control so that when it is clicked both tables will be updated as required. It is as follows:
If Validate() Then
'Make sure editing has completed on both master and child tables
Me.BookBindingSource.EndEdit()
Me.PersonBindingSource.EndEdit()
[Code] .....
I have double checked that the code matches that shown, so this should in theory work fine. But if I manually delete a record from the Book (child table) grid and then click the Save icon on the navigation bar it comes up with the error "Update Requires A Valid DeleteCommand when passed DataRow collection with deleted rows".
Why changes made are not permanently saved to the database? I gather that it's using a "copy" of the data in the database but how do I get the code/form to make changes to the actual underlying database records as well as just the copy? I find this system very unusual, if someone deletes a record in the application why would anyone want this to be just done temporarily?
Okay I've been wondering about this for a while now, but whenever you assign variable values to objects they tend to just become references to the original object
For example:
Dim copiedCollection As ListBox.ObjectCollection = ListBox1.Items
For Each L As String In copiedCollection
If L = "Goodbye" Then ListBox1.Items.Remove(L)
Next
As soon as it encounters the string "Goodbye" and removes the item from the listbox, the program will throw an error saying the the collection (copiedCollection) has been modified. How can I make copiedCollection a true copy (not a reference) to the Listbox1.Items collection?
I'm trying to put together a quick example for another thread about treeviews, and I'm getting a problem when I have a recursive routine, getting the message.
Quote:
There is already an open DataReader associated with this Command which must be closed first.
I'm a tad confused as I am explicitly creating a new command every time through the loop, so I'm not sure (unless its something ADO is doing behind the scenes) how the datareaders higher up the tree are interfering.
Here's my code :
Private Sub SetupChildren(ByVal ParentID As Integer, ByRef ParentNode As TreeNode)
Dim MyCommand As New SqlCommand("SELECT * FROM Groups WHERE ParentGroup=@ParentGroup", m_myConnection)
[Code]...
Obviously I could close the data reader down before calling the next level of recursion but it would prevent the code continuing the loop at the current level when it had finished processing children.