I have a dataset that fills a tableadapter and I'd like to be able to post changes made to the dataset to a database with a date marking the changes. I've never used the TableAdapter.Update method before and was wondering if someone has any good tutorial links for that method.
[Code]...
I have a dataset that fills a tableadapter and I'd like to be able to post changes made to the dataset to a database with a date marking the changes. I've never used the TableAdapter.Update method before and was wondering if someone has any good tutorial links for that method. Here is the
[Code]...
AddNodesTableRows As SampleDatabaseDataSet.NodesRow
Dim i As Integer
For i = 0 To 10
AddNodesTableRows = SampleDatabaseDataSet.Nodes.NewNodesRow()
[code]....
End Try I've get no errors or exceptions from this code but it will not put the data into the database file. It always run through the "update successfull" yet nothing is ever written out to the file.
I need your support here. I have one dataset with numerous table adapters in one project. All fine. Now, in another project I am referencing the same dataset. I have added it as a link.So far so good. However, when I change a tableadapter in my main project store and close, and then open my other project the changes to the tableadapter are not there. For example, I have been adding an additional field to an adapter. But when running the second project that field is not part of the tableadapter.
After investigating a bit, I can say that, for whatever reason, when I link the datasets XSD file it created a copy of the respective Designer File. There is now a link to FundResultContainer.designer.vb, as a child of FundResultContainer.vb. But there is also a FundResultContainer1.Designer.vb as a child of FundResultContainer.xsd.
Like this:
FundResultContainer.xsd - FundResultContainer.vb -- FundResultContainer.designer.vb - FundResultContainer.xsc - FundResultContainer.xss - FundResultContainer1.Designer.vb
This could be causing my problem. However, to clean it up, I have removed the whole tree (dataset) and linked only the XSD file again. IT does again create a second designer file, exactly as above.
I have a project which contains a large number of lookup tables, and I have all of these lookup tables represented in a single typed DataSet, which contains TableAdapters for each lookup. I've designed an editor for these lookup tables, which should allow editing of one of these at a time. My front-end is written in VB and WinForms, the back-end is a SOAP web service; I can successfully pass the changes to the DataSet back to the web service, but can't find a way to use a TableAdapter to update the single table that has been changed.
What I'm trying to do is instantiate the appropriate TableAdapter for the updated DataTable by sending the name of the table back to the web service along with the DataSet, then referring to the TableAdapter with a dynamic name. The normal way to instantiate a TableAdapter is this:
Dim ta As New dsLookupsTableAdapters.tlkpMyTableTableAdapter
What I'd like to do is this, but of course it doesn't work:
strTableName = "tlkpMyTable"
Dim ta As New dsLookupsTableAdapters(strTableName & "TableAdapter")
Is there any way to achieve this, or am I taking the wrong approach altogether? My other alternative is to write separate code for each table, which I'd prefer to avoid!
I am trying to update mysql table from a txt file using vb.net. So far I've found code here and there and been able to extract the data from the txt file, now my question is how to update mysql from the same dataset or xml file. Here is my code to populate the datagrid/dataset/xml file.what is the easiest way to update mysql assuming "Orden" is my primary key in mysql.
OpenFileDialog1.Filter = "Text File|*.txt"
OpenFileDialog1.Title = "Open File..."
OpenFileDialog1.FileName = "trackings"
[code]....
I have a vb.net project where I have data loaded into a datatable in a dataset and have to do approximately 20 updates that are sql like. On this project, I don't have access to sql nor does the end user want to use any type of sql, sql express etc.
My question is, is there a generic way of doing this so I can reuse it. Was wondering if a dataview could be analgous to the "WHERE CLAUSE" and some type of delegate function could be the update function.
[Code]....
I have a vb.net project where I have data loaded into a datatable in a dataset and have to do approximately 20 updates that are sql like. On this project, I don't have access to sql nor does the end user want to use any type of sql, sql express etc
View 2 RepliesI am trying to add NewRow to the database by using datatable in dataset, but before I do that I want to make sure that row is not already there. I create new row for the datatable I am working with, fill it with information. I fill datatable with the row from database that has the same primary key as my NewRow by using tableadapter.fill method, but when I do that my NewRow that was never added to the datatable is filled with information from database(and not information that I assigned to it). I count rows in my datatable before I fill it and it's 0, so why is my NewRow affected by Fill command? (I am using VB.NET 2005 Framework 2.0)
[Code]....
I have code that saves changes to data on a form and it works fine. I then used the same code on a different form (only changing the name of the bindingsource and tableadapter), but changes I make to the data don't save. Why will it work on one form, yet not on another? Here is the code I am using to save the data on the form that works:
Dim deletedRecords As DataDataSet.CatalogDataTable = CType(DataDataSet.Catalog.GetChanges(Data.DataRowState.Deleted), DataDataSet.CatalogDataTable)
Dim newRecords As DataDataSet.CatalogDataTable = CType(DataDataSet.Catalog.GetChanges(Data.DataRowState.Added),
[code]....
The only difference I see is that on the second form (the one that won't save) I have other tableadapters loaded. But they are just used to load data into different comboboxes. What could be causing the second form not to update the tableadapter? I'm not talking about running the application, making a change, then closing the application and it not saving. I realize that a second database is created because I've set the Copy to Output Directory property to Copy if Newer. I can tell it doesn't save because I run the application, open the form, make a change, close the form, then open the form again. The change I just made is gone.
I would like to start a data base. Im using vb2005. I've started a new windows application. I have added a new data source to the project. Then I added a new TableAdapter in the dataSet.xsd part of the project. When I'm completeting the wizard, when I click on the QueryBuilder, when the add table window opens, the table already in the program ( that comes along with the TableAdapter ) isn't recognized. I've clicked on the refresh button but it still isn't recognized. (example: DataTable1 isn't recognized in the add table form in the query biulder of DataTable1TableAdapter)
View 2 RepliesI've been struggling the entire day trying to figure this out. Basically the data in my form won't save to the tableAdapter. To update the database I use:
Me.dataSetName.TableName.Rows.Add (DataRowName)
Me.tableAdapterName.Update(Me.dataSetName.TableName)
The database was created using SSMS 2008 R2 and I'm using VS 2010.
I have confirmed that the data is being stored in the data row (because when I removed data from the data row it wouldn't accept because there are NOT NULL columns) and I have followed the instructions of this form as well:[URl]..
I am a veteran programmer . However , I am new to visual basic 2010 . I am trying to create a database that ould store data within an access file *.mdb .I have created the database which includes multiple tables . moreover i have created app.config file using wizard and my database along with dataset appear in the visual basic 2010 project . moreover when i test the function insert in the dataset the function performs well and the output is correct and i can see the new row added in my access database . however when i try to use the ATLtableadapter.insertquery (ATL is a datatable in my database) function in my form (in view code) the row doesn't get added.
When i first used this function an exception occured was something like first system class exception data.dll something along that lines. . however , when i created a new oledb.oledbconnection and put its connection string as the one in windowsapplication1.my.settings.marketconnectionstring. and used the open comand to open a connection . the message stoppped appearing . however , the insertquery is not adding the row in my database still when i use it in the form.
I have a question similar to this one, but reading the (accepted) answer didn't give me much insight, so I'm hoping to state it more clearly and get a clearer response back.
I'm attempting to insert a data row into a table. I'm using TableAdapter's custom "insert nonQuery" that I wrote (it works, I tested) to accept some parameters. I'm fairly new to this business of communication with a database via .NET and what I'm doing is probably wrong by design. My questions are why is it wrong and what's the right way to do it? Both are equally important, IMO.[code]...
I am creating an application using an Access database and the DataSet, BindingSource and TableAdapter to connect to my database, but I need to able to switch between different databases with the same tables, but new name and path. So I will need to set a new
View 11 RepliesI'm using TableAdapters in VB.NET (VS2008) to an SQLCE DB. These are associated with a range of DataTables in my DataSet.
I'm trying to simplify my app and I'm wondering : If I call the Update method of a table adapter and there have been no changes, then will the TableAdapter still open the underlying database, or is it smart enough not to bother?
At present I'm using simple boolean flags to keep track of which DataTables have modified data - and it works fine - but I'm just thinking I might be able to simplify my code just by always letting it call the updates. But I only want to do if it won't add an overhead.
I have a form that has a datagrid thats being filled by data from a temporary database (called Scratchpad3) and what I'm needing to do is to update another table that's not part being called with my table adapter. My table adapter looks as follows:
Me.Scratchpad3TableAdapter.Fill(Me.MDRDataSet.scratchpad3)
and the table that I need to update is called ExceptionsEdit.
I setup a strongly typed dataset using the DatasetDesigner in VB2010. I am using the TableAdapter.Insert method to add data to an Access table. Before the data is inserted I need to validate the data using the DataTable RowChanging event.
How can I get the DataTable RowChanging event to fire when using the TableAdapter.Insert method?
Here is an excerpt of code I have so far:
When the Insert method runs, it does not fire the datatable RowChanging or NewRow events.
Imports System.IO
Imports System.Data.OleDb
Imports System.Data
[Code]....
things look good till I reach the Bind Commands to Existing Stored procedures page of the wizard and I select my target spproc (rpt_IPR_...) then I hit the finish button and see the message: invalid object name '#TmpResults' now the dataset seems to setup correctly but was wondering why we are getting this message and should I be concerned. The same proc in Access had no issues. [Code]
Because we where not seeing info on the spproc parms we began to suspect that the query made by the IDE to get metadata was failing and that indeed is the case. (we also switch to non-production database to reproduce the issue)after some great SQL debugging from Kevin Currier here at Mindsolve the problem seems to be the SET FMTONLY OFF; SET FMTONLY ON; that the framework is using to get metadata info for the [Code]
I have a VB windows Form project that connects to several DataTables in an Access DB. On my form I have several textboxes, comboboxes and datetimepickers that are bound to those sources. With one table in particular when I try to update the tableadapter after editing one of the textboxes the update method fails. No exceptions are thrown, but the update method returns a zero value and the data is not updated. The update will work when just the comboboxes or datetimepickers are edited, but as soon as a textbox is edited also, update will not work.
Other DataTables within the project are set up in the same manner but are not having update issues. I can't figure out what about this one particular table is causing an issue. Can anyone give me any thoughts on where or what to troubleshoot?
I´m trying to update the database i´ve already have de data set BDHERGAIMDataSet with all my tables(tbboletines is one of them) i add a new row, and set the values of each column of the row in the table and then try to update the database.It doesn´t give me any errors when I run it but it doesn´t write nothing on the database table....
Dim newvobol As BDHERGAIMDataSet.tbboletinesRow
newvobol =Me.BDHERGAIMDataSet.tbboletines.NewtbboletinesRow
newvobol.idnaturaleza = 1
[code]....
In VS STUDIO 2008 I have made a datagrid , where i have set yes too edith, new and delete.this works fine, but now i need some code in form closing to Update my tableadapter to the value from my datagrid
Yes i know there are many Question about this i have read and read this answers but i Can't fine out how to make yhis to work
Why does my code not update my Table...
Private Sub btnSaveChanges_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSaveChanges.Click
Me.EmployeeBindingSource1.EndEdit()
[Code]....
Environment = VB.NET 2005 & Pervasive SQL 9.5 ADO.NET In a simplified example, I have single database table (customers) with the columns "customer_code_PK" and "customer_name" This table is presented in VB.NET 2005 as a single form datagrid (bindingsource/dataset). In this example, the database table is populated with the following data
customer_code_PK customer_name
SHELLShell Oil
BPBritish Petrolium
MOBMobile
In very simplified terms, code does the following;
sub on form load
fill dataset with database records (select * from customers)
[code]....
The datagridview loads the records correctly.Here is the sequence of operations that produces the bizzar behaviour.In the editable datagrid;
1.remove the row with PK = MOB -> save_button -> Database correctly updates
2.add a new row with PK = KFC -> save_button -> Database correctly updates
3.remove row with PK = SHELL -> save_button -> Database exception occurs
On this last command, the row SHELL is INSERTED!!, not removed.However, If I change ths save_button routine to this
save_button
call generate_custom_updateinsertdeletecommands
bindingsource endedit
[code]....
It works correctly !Is it correct that you would need to "refresh" the sql update commands after every tableadapter.update?
I am working on V Studio 2005, VB. I got the following error:
'update' is not a member of DataSetTableAdapters.TableAdapter
I cannot understand why this happened? and now because of it, I am not able to update values in the table.
someone pls help me with this.
I am writing some data to my Database using TableAdpater.Update and the operation can take up to one minute to complete.
Is there some way to report the progress of this to the user because they think it has stopped responding.
how would i go about resetting or refreshing a table adapter before it fills a data grid view (load event). As i have tried a number of things to get it to refresh but it seems that the data connection to the Database is simply not closing and re- openingwould i have to program it to be a manual thing to retrieve the data from the database or am i just not doing it right
View 2 Replieshow would i go about resetting or refreshing a table adapter before it fills a data grid view (load event). As i have tried a number of things to get it to refresh but it seems that the data connection to the Database is simply not closing and re- opening would i have to program it to be a manual thing to retrieve the data from the database or am i just not doing it right.
View 2 RepliesI am trying to use VB.net to update a datarow (record) using a tableadapter but it won't update.
I created a tableadapter based on the following query which will add a new row, but can't find the way to update the row already in the database.
SELECT Player_ID, FirstName, LastName, Gender, Notes
FROM tblPlayerInfo
WHERE (Player_ID = @Selected_Player_ID)
[Code]....
I have two tables that i got from northwind Database and made one out of it from order_details and products and the new table is DataTable1 it has data from both previous tables how do i update that new tableFPENA
View 2 Replies