AddNodesTableRows As SampleDatabaseDataSet.NodesRow
Dim i As Integer
For i = 0 To 10
AddNodesTableRows = SampleDatabaseDataSet.Nodes.NewNodesRow()
[code]....
End Try I've get no errors or exceptions from this code but it will not put the data into the database file. It always run through the "update successfull" yet nothing is ever written out to the file.
I have a dataset that fills a tableadapter and I'd like to be able to post changes made to the dataset to a database with a date marking the changes. I've never used the TableAdapter.Update method before and was wondering if someone has any good tutorial links for that method. Here is the
[Code]...
I have a dataset that fills a tableadapter and I'd like to be able to post changes made to the dataset to a database with a date marking the changes. I've never used the TableAdapter.Update method before and was wondering if someone has any good tutorial links for that method.
[Code]...
I need your support here. I have one dataset with numerous table adapters in one project. All fine. Now, in another project I am referencing the same dataset. I have added it as a link.So far so good. However, when I change a tableadapter in my main project store and close, and then open my other project the changes to the tableadapter are not there. For example, I have been adding an additional field to an adapter. But when running the second project that field is not part of the tableadapter.
After investigating a bit, I can say that, for whatever reason, when I link the datasets XSD file it created a copy of the respective Designer File. There is now a link to FundResultContainer.designer.vb, as a child of FundResultContainer.vb. But there is also a FundResultContainer1.Designer.vb as a child of FundResultContainer.xsd.
Like this:
FundResultContainer.xsd - FundResultContainer.vb -- FundResultContainer.designer.vb - FundResultContainer.xsc - FundResultContainer.xss - FundResultContainer1.Designer.vb
This could be causing my problem. However, to clean it up, I have removed the whole tree (dataset) and linked only the XSD file again. IT does again create a second designer file, exactly as above.
I´m trying to update the database i´ve already have de data set BDHERGAIMDataSet with all my tables(tbboletines is one of them) i add a new row, and set the values of each column of the row in the table and then try to update the database.It doesn´t give me any errors when I run it but it doesn´t write nothing on the database table....
Dim newvobol As BDHERGAIMDataSet.tbboletinesRow
newvobol =Me.BDHERGAIMDataSet.tbboletines.NewtbboletinesRow
newvobol.idnaturaleza = 1
[code]....
I have a project which contains a large number of lookup tables, and I have all of these lookup tables represented in a single typed DataSet, which contains TableAdapters for each lookup. I've designed an editor for these lookup tables, which should allow editing of one of these at a time. My front-end is written in VB and WinForms, the back-end is a SOAP web service; I can successfully pass the changes to the DataSet back to the web service, but can't find a way to use a TableAdapter to update the single table that has been changed.
What I'm trying to do is instantiate the appropriate TableAdapter for the updated DataTable by sending the name of the table back to the web service along with the DataSet, then referring to the TableAdapter with a dynamic name. The normal way to instantiate a TableAdapter is this:
Dim ta As New dsLookupsTableAdapters.tlkpMyTableTableAdapter
What I'd like to do is this, but of course it doesn't work:
strTableName = "tlkpMyTable"
Dim ta As New dsLookupsTableAdapters(strTableName & "TableAdapter")
Is there any way to achieve this, or am I taking the wrong approach altogether? My other alternative is to write separate code for each table, which I'd prefer to avoid!
I use this save code which is generated when I drog and drop table from data source to form[code]...
View 1 RepliesSo I'm not familiar with much vb code but I was hoping someone my spell out something pretty generic as far as updating a database. I'm pretty sure I've successfully edited rows but when i'm using my database update i get an error, probably just incorrect syntax. This is what I have so far...
[Code]...
I use this code and update the database with changes in my DataSet but the changes are not showing up in the database.
' Update the connection object.
'------------------------------
myConnection.ConnectionString = FormMain.strDatabaseConnection
[code]....
I have a form in vb8 that is set up as follows:
I have a table in my Access database calledUsers that has a name and a password (encrypted).
Using the toolbar I created aBindingSource with a name of UsersBindingSource and a dataSource ofUsers
Using the toolbar I created aDataset called with a Name and a DatasetName called Users_Dataset
Using the toolbar I created atableAdapter called UsersTableAdapter
I added two textboxes on the form and changed theirDatabindings...Text property to the corresponding field in the Database.
How to now update the database when I click Update. What the program needs to do first is encrypt the Password before saving it. I wrote the code in the TextBox2.Lostfocus event to encrypt the data a place it back into the TestBox2 field. The only samples I find on the net refer to DataGridView controls (which work) but I don't want to use them. How can I get the database to accept these changes as well as changes to radio buttons or comboboxes?
On a form i have several text boxes binded to a bindingsource and including a datagridviewI have populated the textboxes with database fields successfully and the datagridview displays the correct information.I have the following code to save the information to the database but i cannot get it to work. [code] I have tried many code examples here in order to save the data, none of which has worked.Can anyone please help me with this?
View 1 Repliesi'm using vb 2008 express editor, and 3.5 compact sql, through my program, i make changes, like altering rows, deleting or adding new rows, to a dataset. i want, that when button 1 is pressed, all changes made to that dataset, are updated to my database. what is the line of code that does this? [Code]
View 1 RepliesI am developing an application which uses a database that holds the information about a company and it's personnel. but when I try to edit already existing data in the dataset it just won't update it. I've tried all the method the MS sites provided me, but it just won't. the code looks like this: (notice this code wasn't complete)
[Code]...
I am popolating a DataGridView with a DataSet from an SQL database like in example bellow.
After I am making some changes I need to know how can I save modified data in SQL database>
Let's say that I have a form with a DGV and a button. On load I will put ten lines from a tbale from database inside the DGV. Then i will make some changes and after that when I click on the button I need to save the modified information. Everything has to be done on runtime.
[Code]...
I am using vb2008 express edition and SQL Server 2000What I am trying to do is programmically populate a dataset with records from a database and then bind the fields to textbox controls so that and changes will be updated in the dataset and eventually the database.I have managed to get as far as displaying the data in a form, but cannot understand how to update the database when a button is clicked.
View 3 RepliesI am currently developing an application that is linked to a MS SQL Server 2008 Database. So now I realised that I needed to make a few minor changes to the database (add new columns to some tables, change the data type of a few columsn in some tables). After making the changes, I realised that these changes have not been updated in my VB application's dataset. I then tried to "refresh" the dataset, but it still is not updating the dataset. What do I need to do to update the dataset to reflect the changes in the database?
View 1 RepliesI'm developing an application where depending on a textfile input i should update/insert some data into an Access database. Let;s say I'm updating the bookshelf of a book according to a textfile that goes like:
TEXTBOOK | BOOKSHELF
000000001 | 000000000A
and so on
[Code]....
does that make any sense? What I'm trying to do is basicalle: check if a book exists, if yes, then attach to Dataset, change its Bookshelf to the one in the textfile and repeat until the file is completely read. The Bookshelf can or not exists, if it doesn't then it should be inserted, is it done automatically when I update the Dataset? Finally "Batch update" the whole Dataset.
i have a dataset that filled by this query :
SELECT Invoices.ID, Invoices.invoicenu, Invoices.pdate, InvoiceList.icaption, Invoices.icaptioncode, Invoices.ccode, Invoices.postedbill, Invoices.billnumber, SUM(InvoicesDetaile.price)
AS Tprice
FROM InvoiceList INNER JOIN
[code]....
a datagridview is showing dataset data and user check checkedcolumn of datagridview (postedbill filed) and after user mark a few rows , i want update (invoice table) in database .
I am connecting to a web service that returns a dataset that I use as a datasource for a windows client datagridview.
Once a user has made changes to the datagridview record(s), how do I get those changes back to the connected dataset and back to the remote database.
I wrote the sql update function in the service:
Code Snippet from web service
<WebMethod()> _
Public Sub Update_equipment_repair(ByVal repair_id As Int64, ByVal date_entered As DateTime, ByVal date_sent_in As DateTime, ByVal date_returned As DateTime, ByVal damage_description As String, ByVal vendor_id As Int64, ByVal repair_description As String)
[Code]....
This displays the records perfectly and I figured out how to delete and insert records via web service.
writing updates from the datagridview back to the database.
I am writing a small windows client application that accesses data using a web service that returns datasets.When the dataset is returned, a datagridview's datasource is set to the dataset.
My question is, how do I write changes that were made in the datagridview back to the dataset and then back to the remote database.
[Code]...
Now the client snippet that connects to the service and lists the equipment
I have a question similar to this one, but reading the (accepted) answer didn't give me much insight, so I'm hoping to state it more clearly and get a clearer response back.
I'm attempting to insert a data row into a table. I'm using TableAdapter's custom "insert nonQuery" that I wrote (it works, I tested) to accept some parameters. I'm fairly new to this business of communication with a database via .NET and what I'm doing is probably wrong by design. My questions are why is it wrong and what's the right way to do it? Both are equally important, IMO.[code]...
I have a gridview loaded with data from my database and a gridview swapping function which after exchanging data between rows with a column call "Priority", I want to save these changes back to my database. Only the "Priority" column value will be change, how do I update only that Column of my dataset table to my SQL database?
[Code]....
How to perform add, edit, delete in a dataset that will update the database as well?
View 1 RepliesI am creating an application using an Access database and the DataSet, BindingSource and TableAdapter to connect to my database, but I need to able to switch between different databases with the same tables, but new name and path. So I will need to set a new
View 11 RepliesI'm using TableAdapters in VB.NET (VS2008) to an SQLCE DB. These are associated with a range of DataTables in my DataSet.
I'm trying to simplify my app and I'm wondering : If I call the Update method of a table adapter and there have been no changes, then will the TableAdapter still open the underlying database, or is it smart enough not to bother?
At present I'm using simple boolean flags to keep track of which DataTables have modified data - and it works fine - but I'm just thinking I might be able to simplify my code just by always letting it call the updates. But I only want to do if it won't add an overhead.
I have a form that has a datagrid thats being filled by data from a temporary database (called Scratchpad3) and what I'm needing to do is to update another table that's not part being called with my table adapter. My table adapter looks as follows:
Me.Scratchpad3TableAdapter.Fill(Me.MDRDataSet.scratchpad3)
and the table that I need to update is called ExceptionsEdit.
things look good till I reach the Bind Commands to Existing Stored procedures page of the wizard and I select my target spproc (rpt_IPR_...) then I hit the finish button and see the message: invalid object name '#TmpResults' now the dataset seems to setup correctly but was wondering why we are getting this message and should I be concerned. The same proc in Access had no issues. [Code]
Because we where not seeing info on the spproc parms we began to suspect that the query made by the IDE to get metadata was failing and that indeed is the case. (we also switch to non-production database to reproduce the issue)after some great SQL debugging from Kevin Currier here at Mindsolve the problem seems to be the SET FMTONLY OFF; SET FMTONLY ON; that the framework is using to get metadata info for the [Code]
I have a VB windows Form project that connects to several DataTables in an Access DB. On my form I have several textboxes, comboboxes and datetimepickers that are bound to those sources. With one table in particular when I try to update the tableadapter after editing one of the textboxes the update method fails. No exceptions are thrown, but the update method returns a zero value and the data is not updated. The update will work when just the comboboxes or datetimepickers are edited, but as soon as a textbox is edited also, update will not work.
Other DataTables within the project are set up in the same manner but are not having update issues. I can't figure out what about this one particular table is causing an issue. Can anyone give me any thoughts on where or what to troubleshoot?
In VS STUDIO 2008 I have made a datagrid , where i have set yes too edith, new and delete.this works fine, but now i need some code in form closing to Update my tableadapter to the value from my datagrid
Yes i know there are many Question about this i have read and read this answers but i Can't fine out how to make yhis to work
Why does my code not update my Table...
Private Sub btnSaveChanges_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSaveChanges.Click
Me.EmployeeBindingSource1.EndEdit()
[Code]....