All my controls for getting data from user are in TableLayoutPanels and GroupBoxes inside TableLayoutPanel, I want to set default selected index of entire CoboBoxes to 0 in all TableLayoutPanelsand and GroupBoxes inside TableLayoutPanel. [code]...
View 23 RepliesI am using VS 2008/VB with Access 2007. I have 2 forms that I use to create entries. In the first form (fomr1) I select the type of entry which opens the respective form (form. In form1 I use some code to read through a oledbreader the id rows and get the max value in that column. I take that value and I add 1 to it and then assign the value to a textbox in form2. The whole process worked fine until today which gives me this exception "An error occurred creating the form. See exception.innerexception for details. The error is Object reference not set to an instance of an object. "
[Code]...
I have an application that when ran I can not seem to be able to move the form. When I try to select the cancel (x) button on the form nothing happens. I am lost as to why I am unable to select the form and move it or close the form.
View 1 RepliesI'm Using MonthCalendar Control in my Form to select Multiple Dates. (for eg. 1st April,20th April,25th April). I'm planning to Change the date the user clicked by making it BOLD during run time, so that i can retrieve the results in a Date array. [code] MessageBox clearly shows the date selected, but no effect for the "addboldeddate'.
View 3 RepliesI'm writing a program in which I want to list the values of some of the properties on every control on every form in the application. I can do this for simple controls like Buttons and Labels, but am having a problem when it comes to a complex control like a ListBox. I know how to extract the data when I laboriously code each ListBox individually. The problem is how to do it when it's a generic object buried inside two loops
View 7 Repliesi want to select the row on datagridview and send it cell's value into textbox / label control on the same form..but it seems not work, but when i use
Private Sub DGV_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DGV.CellClick
it can but i have to choose by click on each cell on it datagridview..what i want is i only have to click on it[datagridview] row but i get all value on it's column.. so i can parse/send it value into textbox.it only can be clicked with single row i knew it by DataGridView1.SelectionMode = DataGridViewSelectionMode.FullRowSelect
Am faced with the above problem which I have failed to understand. the details of the error are given below.
Code:Control 'ValidationSummary1' of type 'ValidationSummary' must be placed inside a form tag with runat=server. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Control 'ValidationSummary1' of type 'ValidationSummary' must be placed inside a form tag with runat=server.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Control 'ValidationSummary1' of type 'ValidationSummary' must be placed inside a form tag with runat=server.] System.Web.UI.Page.VerifyRenderingInServerForm(Control control)
[Code].....
I have a problem with My dataGridVew. i am trying to export data from my DB to excel fie. it's a small page where there are only data grid view and button to export like this :
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
[CODE]...
When i click on the button error message is coming : "Control 'GridView1' of type 'GridView' must be placed inside a form tag with runat=server.???" even i have placed it in form ?
I have a form with a Tab Control that has 18 pages. When I click on a tab it opens the page and select a textbox on that page (txtTextbox1. Select() ). This works for the first 8 pages but not for the remaining 10 pages. Although on these pages I can mouse click on the textbox, enter info, save then click my Add button that clears the textboxes and has the code (txtTextbox1. Select() ). The textbox is selected just fine. The code for all my pages is the same except for the tab name and the control names. The tab key will move the selection to the next textbox in order on all pages and the Enter key is coded to do the same. The first 8 pages have a total of 256 labels, buttons, list boxes, textboxes and checkboxes on them.
View 10 RepliesWhen I try to add new datasource, the option 'database' isnt shown. Only Service, Object and Sharepoint is shown. This is done in VS 2010 Beta 2
View 3 RepliesHow do I select a folder and add only certain type to ListBox. For example, I select a folder and in that folder it contains 5 .jpg file and 20 .txt. How do I make it only add 5 .jpg to the list?
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code].....
<ItemList
<item>
<ItemID>175290334</Itemno>
<ItemTitle>iPod 16GB</
<location>London</location>
[code]....
For every Item there is an arbitrary number of paymentMethod nodes, at least one, possibly several.How do I select all paymentMethod nodes within a given item into an XmlNodeSet? Presumably using the selectnodes method, but with what argument?
Dim Payment_nodes As XmlNodeList = current_item("Item").SelectNodes(????)
I have the properties. I have the format property set to TIME. The text box on the form now shows the time. But when you click on the pull down, you get the date picker.
View 2 RepliesI am trying to write a LINQ equivalent of
SELECT C1, C2, C3
FROM T1
WHERE T1.C4='xyz' AND
EXISTS (SELECT 1 FROM T2
WHERE T1.C17 = T2.C24)
ORDER BY C3
I'm using EF CTP 5, so I have a DBContext variable named dbc, which includes DBSet objects T1s and T2s, based on POCOs T1 and T2.
In LINQ I write
DIM IND = From i In dbc.T1s
Where i.C4 = "xyz"
And (From t In dbc.T2s Where i.C17 = t.C24).Any
Select i.C1, i.C2, i.C3
Order By C3
Running the query I get the error message "Unable to create a constant value of type 'T2'. Only primitive types ('such as Int32, String, and Guid') are supported in this context." When I omit the inner expression (third line in the LINQ code), the query runs fine. I tried switching the orders of the inner comparison, to be t.C24 = i.C17, with no effect.
I want to be able to have a case for each data system data type. Obviousely the code below doesnt work but it should make it easier to understand my question.
[Code]...
[code]How would I switch on an object's type but using VB.NET's Select Case?I'm aware that some might suggest using polymorphism but I'm using a hierarchy of small message classes so that really wouldn't work in my csae.
View 6 RepliesI am trying to make it so when I use Me.Controls("Timer1") for example I can access specific commands for a timer such as Stop() Start(), I tried CType() and typed in "Timer" as the type but it says the control type can't be converted to the "Timer" type.
View 11 RepliesI have read this many times. Focus is a low-level method intended primarily for custom control authors. Instead, application programmers should use the Select method or the ActiveControl property for child controls, or the Activate method for forms. What exactly is the difference? Subnet Calculator / Planner Serial Port
View 12 RepliesI am working on a front-end application program and cannot figure out what is giving me this error. The program is accessing an Access Database and filling a text box on the form. The error i keep receiving is "Index out of range", "No row at position 0". I have information in the data table, and when I type the select statement into a query in Access, it returns the information in the data table.[code]...
View 8 RepliesI am using select command for one of my button
Dim edit1 As OleDbCommand = New OleDbCommand("select * from [exporter] where exp_id='" & t1.Text & "'", con1)
now:-
t1 is a textbox
and in my table exp_id is "Number" now when i run this i get an error at the time executing reader (Data type mismatch in criteria expression.) but when i change exp_id properties to "Text" it run's properly
I am using OleDb, trying to do this:
Dim d as Date = DateSerial(Year(rptDate), Month(rptDate), 1 - 1)
Dim conn as OleDbConnection = new OleDbConnection(connStr)
Dim cm as OleDbCommand = new OleDbCommand()
[code]....
I know that d is the same date as the one in SQL server, specifically 3/31/2011 12:00:00 AM.
i need to select some records from table Tr_cashbook between two date. the date field is newdt in which i need to compare data and the records should be shown in crystal report named rptCash2. the newdt field has datetime property. here is the code on the command button
bdcon.Open()
Dim QueryString As String
QueryString = "Select * from Tr_Cashbook where (Cast(newdt as date)>= " &
[Code]...
but this is not working when i press the command button it gives error as operand type clash: date is incompatible with int.
I am using VB2008 Express and a MSSQL Server 2005 db by the way! I have a comprehensive SQL statement, which should fill my Grid:
DECLARE @Sum NUMERIC(9,2)
SELECT @Sum = SUM(I_LS.lmenge)
FROM dbo.lfs AS I_L
[CODE]...
Now here is my problem! I want to have a form with a datagridview that displays all of the values I am querying. This shouldn't be a problem I guess. However, I have no idea how I can integrate two textboxes that can be used to enter the selection criteria (WHERE I_L.lfsnr LIKE '%1253') AND (l.sped_journal = '11-08')[/SIZE]. I have googled and read many threads so far but didn't stumble upon anything that would suit my needs and answer my question. Maybe it's just too elementary!? By the way, it is very important that the input of textbox1 ((WHERE I_L.lfsnr LIKE '%1253')) is linked to 3 positions in my SQL query to define the search criteria!
The worst thing is that I don't want to have a bindingnav displayed! I do not need any delete, update or add functions just the select option, however!
If I create a list for a TextBox:
[Code]....
I am able to only add controls that are of type TextBox. My question to you is, can I create a List to hold more than one control type or do I have to create a list for each control type?
I have problem with listview controls. I need to get some select control, i tryed to find at google but no one didnt work.
1. AxWindowsMediaPlayer3.URL = ListView3.SelectedItem.I need something like that what works
2. and some code what remove selected thing
VS 2010 On Tab Control Select
View 3 RepliesI'm working on a function that handles events from a number of buttons and trying to define a Select...Case based on the clicked button. Something like this...
Private Sub btnClick(ByVal sender As System.Object, ByVal e As System.EventArgs) _
Handles btnThis.Click, _
btnThat.Click, _
[Code]....
which don't work either. Is there any way I can define a Select...Case in this manner or is it always destined to fail due to the attempt at comparison of reference types?
Can a listview multiselect in the same way as a listbox can, when it is set to electionMode = multiSimple?for instance when the listbox is set to selectionMode = multiSimpleyou can just select any number of items in the listbut...with a listview you can only multi-select when you hold down Ctrl. As soon as you lift the Ctrl key and click on an item it de-selects everything and only selects the last one you selected
View 4 Replies(In VS 2008) I have a usercontrol that is in the properties list in Design view, but I can not see the actual control, and it creates some error. How can I remove it when I can't select it?
View 2 RepliesThe code below selects all items in a listview control,fine,but I was wondering how I could code to select all but the very last line in the array.[code]
View 5 Replies