Send AT Commands To Router Network Port?

Aug 9, 2010

How can i send AT commands to my router network port?

View 6 Replies


ADVERTISEMENT

How To Send Commands Over A Network

May 26, 2010

I have never programmed a network program before and would like to learn at my own pace. Also I am not asking anyone to write this complete program for me, just bits of code to help me write a complete program. (though if you do code it all I won't complain.) I already tried using internet tutorials but none of them seem to work.I am trying to program a simple form with 4 buttons, and 2 users.The first button is a connectivity button. "Green" for connected, "Red" for not.The second button is a "Connect" Button which will connect to another computer with this program installed/active. (I want it as simple as possible)and the next 2 buttons switch between "1" and "0" depending on user input(Default "0"). the first button is the local user button and the second is the remote user button. When the local user clicks the local button then what he/she changes it to will be displayed at the remote site. The same thing will happen with the remote user.

I know how to place all the buttons where they belong, and to change the local text, but I have no Idea how to connect to a remote program or to pass messages between the two users. Can anyone suggest some Simple code to do this. (something that I will be able to learn and use to make more complex code later on.)

View 2 Replies

Send XML Commands In Vb To Get Data Received Over A Serial Port

May 5, 2011

How do I send XML commands in vb to get data received over a serial Port?

I know the commands I'm just not sure how to send them.

View 2 Replies

Serial Port Communications - AT Commands - Send And Receive Data

Apr 12, 2009

I have a USB modem that can detect caller ID and can detect dialled digits when special AT commands activated, How to send and receive data. The sent data will be the AT command such as AT+VCID-1 to activate the caller ID, the received data will be caller ID information and the digits dialed. I'm new to prgramming and using Visual Basic 2008 Express.

View 8 Replies

C# - Get Router Name And IP As Shown In Windows Network Tab (in Code)?

Oct 1, 2010

Basically, if you go to Start and click Computer and then click on the Network link on the left hand side, you'll notice on the right hand side several categories, one of which is titled "Network Infrustructure", in that category, my router is listed, and in my case, it is "LINKSYS WAG160N Wireless-N ADSL2+ Gateway" and when you right-click and select properties, it lists basic info such as internal/gateway IP address, on mine it is "192.168.1.1" I would like to know how to retreive this information in code, preferably a Windows API so that i can call it using a legacy VB6 app. Also, even if you just know a .NET version or a Delphi version, please do list that as well as i can code in both. However, the answer i'm ultimately seeking is a method to access this via VB6 so that would probably be a WinAPI call (will upvote & select this as answer), however, other methods are also welcome incase i can't find a legacy method (i will upvote these).

View 3 Replies

DB/Reporting :: MS SQL Cannot Pass Port Forwarding Function On Router

Oct 2, 2008

I have setup a MS SQL server in my computer and enable the sql server to listen to the TCP/IP port 1500. I can use my vb.net program to access to the sql server from another pc within the same LAN by using the following connection string "Data Source=192.168.1.101,1500;Database=ABC;UID=SA;PWD=123;

But if I changed the "192.168.1.101" in the connection string to the IP address that provided by the ISP (i.e.: "Data Source=<IP from ISP>,1500;Database=ABC;UID=SA;PWD=123 the connection string do not work. I have set the port forwarding function in the router as forward all TCP from 1500 port to IP 192.168.1.101. But it don't work neither......

Then I checked the port 1500 with the webpage below: [URL]
It show that the port 1500 is closed! But if I use DMZ function on the router to explose my computer the internet.... the above webpage can checked the port 1500 is opened! And I can successfully connect the sql server with this connection string
"Data Source=<IP from ISP>,1500;Database=ABC;UID=SA;PWD=123;"
Is that the mssql cannot pass the port forwarding function on the router? I have set the port 8080, 21 forward to another IP on the router and it work fine......

View 1 Replies

Checking IP And Port Of Switch / Router That Links To Remote Device

Oct 10, 2009

Our company has setup several remote devices that link to a switch Whenever there are problems on the device, some technicans will replace it using a new one We have a vb program that can automatically update the device setup in our server when technicans replace devices. So we do not need to login and update the setting manually However, our program cannot handle the case that there are more than 1 device that need replacement Therefore, our idea is to retrieve the ip and port of the router/switch that links to remote device using VB.net.

View 2 Replies

VS 2008 Network App - Send Message Or Network Package To Some Of The Clients In The Network

Aug 18, 2009

Here is my idea so far: I have a bunch of computers connected in a local network. One of them is a MySQL server, one will have a vb.NET program wich will act as a "second server" and the rest will be different clients. What I want to do is that the "second server" will send out some kind of message or network package to some of the clients in the network, and they will execute a code based on what message it is, or what kind of package it is. I'll give you a simple example:

[Code]...

View 6 Replies

VS 2008 : Sending Commands Across A Network?

May 1, 2010

What I need to be able to do is send a command across a specific network port (eg. 2124) to a specific ip address. I already have writen the recieving code (for the iPhone os) and accepts commands like:

filefound("Name of file",filetype,size)

All this is to be sent in plain text and once received the iPhone will then send a command like:

nextfile()

View 1 Replies

Serial Port - Initial Communication Not Respond To Any Commands

Jul 9, 2007

I have a VB2005 application that sends and recieves data with another application (3rd party, not vb 2005) via COM port. When I run the apps on different computers they work great, they send all data to eachother and everything is fine. When I run them both on the same computer with either virtual null modem ports or with 2 hardware ports connected together via null modem cable they stop communicating.

[Code]....

View 5 Replies

How To Send EPL Commands To USB TLP2824

Dec 26, 2010

I have a Zebra TLP2824 Printer and I want to know how to send the EPL commands from a VB.Net Windows Form application.

View 2 Replies

Send Commands RS232?

Jul 26, 2010

I have downloaded the vb script and it works as it should, its a program where you have some buttons so that you could trigger the relays.But i need several small scripts, one for each relay on / off so that i can call them from a .bat file with argument.i have a .bat named relaycard and in thet i have created argument like

relay1on
relay1off
relay2on
relay2off
and so on.

The small program relay1on should just do the jobb and then close itself.Maybe its a little bit clearer now.On the link that i posted there is a manual and even links to the vb program,

View 27 Replies

Send Commands To Its Prompt?

Mar 15, 2012

What I have done so far is place the compiler inside the bin of my project folder, inside the Debug folder. I managed to call the cmd shell but the problem is whenever I pass commands to that cmd shell, it doesn't work. What happens is it opens a cmd shell and when I pass commands on it, it opens many other shells.[code]...

View 1 Replies

ASCII And BCD - Send Commands From PC To Device Using USB

Apr 19, 2011

I need to send commands from PC to device through USB cable, and the code is : "0"(48) and must end with Enter(13). so what should I type in for the code for Enter?

View 6 Replies

How To Send Messages/commands Between Apps

Jun 15, 2009

I've got a curious problem that I can't crack. I have 2 applications, app A and app B. Application A runs continuously doing various things. On the same machine I have application B that runs infrequently at random. I need for application B to tell application A to do something. Both are vb.net apps that I've written and can tweak to make this work. I can't figure out how to get app B to communicate with app A while app A is already running?

View 4 Replies

Make A Program To Send AT^ Commands?

Sep 23, 2010

want to make a vb.net program to send AT^ CommandsI want to send this command

View 2 Replies

Send Commands To CMD ( Command Prompt )?

Jun 24, 2011

In my application I have only one button . That button will open CMD then it will send a command into cmd , now after that command it requires an "enter key" to continue the process .I tried the shell command in order to access the command but then I couldn't press enter in cmd using my application

View 4 Replies

Send Commands To Command Prompt

Dec 13, 2011

I am trying to send commands to Command prompt.The following code should open the text file I specified.However it opens several instances of the cmd window and also several copies of the text file. Sometimes the text file is not opened and if the file path is long, part of the file path gets inserted into my text file.[code]

View 1 Replies

Send Commands To The Telnet Session Via Vb?

Dec 14, 2009

i'm trieing to configure a mp3 recorder via telnet and visual basic.how can i send commands to the telnet session via vb?I can make connection with it via telnet and ip adress , but after that i wil send the command for login( login=hdr1) ANd with another butten for example (transport=play)How can i do that?

[Code]...

View 1 Replies

Send Items In Listbox AT Commands?

Jan 29, 2012

I wanted to send the items within a listbox.One item at a time

this is the code snippet:

For i = 0 To 5
SMSPort.Write("AT+CMGS=" & Chr(34) & sender & Chr(34) & vbCrLf)
SMSPort.Write(listfiles.Items(i).ToString() & vbCr & Chr(26))

[Code].....

View 4 Replies

Use AT Commands To Send An SMS Not Work With Windows 7

Mar 3, 2011

I'm running Visual Studio 2010, and i'm trying to use AT commands to send an SMS. My question is will it not work with windows 7 due the exclusion of hyperterminal in windows 7. (I was able to dowload a version of Hyperterminal and can use AT commands in that.. but my code itself does not work.) My code is below.

[Code]...

View 5 Replies

VS 2008 Remote Send Commands?

Dec 10, 2009

I have an application which I would like to access from another computer.So I thought of making a client which my application(server) would send commands to and then the client runs the command.

View 6 Replies

C# - Windows IPC Methods - Send Data / Commands To Dll?

Apr 27, 2010

I have a dll that I can load in another program. Now the dll has access to all data/functions in the other program. Which technology can I use that now an external program can send data/commands to that dll, to steer the other program, or get data from it ? I mean, in the past that meant DDE, I think that was back in Windows 3.11/95 times. What can I use today? Which one is easiest ? Which one is fastest?

View 3 Replies

Click A Button And It Send Various Commands To VPS Server Through SSH

Aug 3, 2011

I want to make a simple program where I can click a button and it send various commands to my VPS server through SSH. I have had an extensive search online but the SSH Components range from $200-$500 which is far to expensive for what I want to do. I was just wondering if anyone knows any other free alternatives. Or maybe has seen a free SSH Component. I am very well aware that free clients exist like putty but would very much like to incoperate it into my own program to be automated.

View 1 Replies

Use The Address Bar To Send Commands To External Application?

Oct 3, 2009

How can i use the address bar to send commands to a external application?

Example:

AOL Instant Messenger -

I havent used this application in a long time. But i remembered if you wanted to add a friend to AIM from their online profile it directed them to a link such as:

aim:addfriend=contactID

and AIM would pick this up and add it the contactID to the application. The link i posted is more than likely not the correct link they use but it shows what im trying to accomplish.

Im looking to achieve something along the lines of:

myApplication:command=commandValue

View 2 Replies

Will Commands Send To A Process.Start Be Obeyed From Within IDE

Sep 16, 2010

Will the commands I send to a Process.Start() be obeyed from within the IDE? [code]This doesn't work in the IDE, just gives me a blank window with the full string as the window name, but I'd like to fire up ffmpeg from within the app, wondering if it's an IDE thing or my code. I know some things in Flash work differently in the IDE than the "real" thing, not sure if VS does it too.

View 1 Replies

Use Sendkeys To Send Some Basic Auto-mation Commands?

Jul 29, 2009

I play Lord of the Rings Online and tried to use sendkeys to send some basic automation commands.Unfortunately it doesn't seem to get the keys I'm sending

AppActivate "Lord of the Rings: The Mines of Moria"
sendKeys (" ")
does nothing.

[code].....

View 2 Replies

VS 2010 : Send RCon Commands To Game Server?

Dec 20, 2010

im trying to send RCon commands to a Call of duty: Black Ops game server.I read a thread from a few years back about sending RCon commands to a CoD 4 server, and all look promising until the application kept crashing when I pressed connect.

[code]....

all I want is to be able to send a few commands to the server through an application.

View 18 Replies

Respond To Data From A Local Network Port?

Nov 27, 2009

I am writing some software that should respond to commands from a port.

How do I set up a handler to respond when data is recieved at that port.

Do I need to do anything special, like respond or set up the port in the first place.

I don't have any experience doing anything like this!

CheersGuy Joseph - Intel Quad Q9450, 4Gb Ram, 3x500GB Hard Drives, NVidia 8800GT, Marian Marc 8, VB Express 2008

View 1 Replies

Implement Port Blocker And Network Monitor In Program?

Jan 4, 2011

I want to write a program that can control port communication in a PC by blocking certain port based on the admins request and also monitor incoming and outgoing network traffic. Can i achieve this using vb.net winsock?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved