I have a UI hosted on a webpage. I'm able to run the control on the server hosting it, but when I attempt to run it from other machines on the intranet, only some of the required DLLs make it to the client.
View 1 RepliesI have some custom user controls in my .net winforms program that do not display correctly when the user has selected larger text size. This setting:
My controls look like this:
Instead of like this:
The bill to area and ship to area are both custom controls. I don't know if this is contributing to the problem but I do have code in each to scale the phone/fax areas to stretch nicely, like this code from the bill to control,
Private Sub panFaxPhone_Resize(sender As Object, e As System.EventArgs) Handles panFaxPhone.Resize
panFax.Width = (panFaxPhone.Width / 2) - 1
panPhone.Width = (panFaxPhone.Width / 2) - 1
panFax.Left = panFaxPhone.Width - panFax.Width
End Sub
How can I get my controls to size correctly while still respecting the users choice for larger text (I don't want to just set the AutoScaleMode to None)? After playing with this for a long time it seems to be a problem with anchors in the child controls. See this below image, the inner black box is the control with its border turned on, the text boxes (like name) are anchored left and right and should stretch to fill the control, but don't.
I am getting this annoying warning message "Object reference not set to an instance of an object." all the time because I created several custom user controls and drag it to a Windows form in a vb.net Windows application. I am using vs 2005 and dot.net framework v 2.0. This message pop up when I try to save the projector when I try to debug it in the Design mode.
View 2 RepliesI want to be able to define some namespaced constants on the code-behind of my VB.net pages. For example,
[Code]...
There is newer code in a follow up post. I suggest using the code in the later post rather than the code in this one. You can still read this post though. When designing a user interface, one should be conscious of how many individual controls are required to implement the functionality. In some cases an initial design may begin with many buttons or textboxes (for example) but then further review of
the actual required functionality allows for a reduction in the number of unique controls.
But other times, there isn't a better way (which will still make sense to the user of the application) then to have a series of many repeated controls. So in the cases where one can be certain that the best UI implementation for an application will require the use of multiple copies of a given control, then it often becomes necessary to maintain some method of managing all of those controls at various points
throughout the application. Doing so typically requires that one build up some collection of controls which can then be accessed by index in order to work with any given control; but this can lead to a lot of clutter in the code file which handles these control's events. For instance there will be some kind of collection declaration, some recursive routine to find all of the controls of interest, and then any number of event handler methods with long lists of Handles clauses, or additional code loops to wire up the event handling for each control.
Purpose Since most of this functionality could be considered a requirement regardless of the type of control being managed, or its required functionality, it may make sense to wrap all of the control management functionality into a single class. And since our first requirement is a collection of controls, then a base collection class could be the perfect starting point for our control manager. There are a number of existing thread around this topic, with some recent (at the time of this writing) ones being:[URL]..In this, and related, threads I have posted examples of a simple TextBoxManager and ButtonManager control. But again, with so much similar functionality required regardless of the control being managed, it would be technically possible to create a generic ControlManager(Of T As Control) class which can manage any type of control.
[Code]...
So in summary, one can facilitate managing a large number of user interface controls by building a "control manager" class which both encapsulates the list of control instances, and deals with adding and removing defined event handlers for every control it manages. The generic control manager class itself can be inherited and extended into a more specific class on a per-application basis in order to provide more application-specific functionality. Reed Kimble - "When you do things right, people won't be sure you've done anything at all"
i have a windows from project and in that project i created a user control lets call itcustombutton1 now i can use that control quite easily either at design time or runtime by creating a new instance of it like
View 1 Repliesi want to control my tab pages with custom buttons...now i want to hide my tabs from tab controls...
View 2 RepliesI want to know how to add custom controls to vb.net.
View 6 RepliesHow many controls can I have before I should start looking at user defind controls because of too many controls making my program go slow?
View 4 Repliesin VB.NET i have 2 custom controls, one is a TextBox and second one is a ComboBox.These have custom values like Bool _IsHidden and are added on runtime to a form.Now, at some point in the code I want to check if the _IsHidden is set to True or False and display that information. Since the user can edit this values when creating the control these are not set on creation.
So what I tried is:(all of this is on MDI Forms)
For Each frm as CustomForm in Main.MdiChildren If frm.MyName = calledBy Then 'this part is just to know which form called the form to create the object For Each cntrl as CustomTextBox in frm.Controls'DO Something
Next End if Next
Now.. if the first control is a custom ComboBox it thorws an error since it sees that it does not match the custom TextBox control..how do i get around this? By my understanding it should just go through all of the controls on the said form and just check those who match CustomTextBox control ?
I've created custom buttons in a .dll and they work fine, so I thought I'd have a go at creating my own sort of listbox to replace the standard one in my applications. It's basically a panel with a few labels and a button (eliminating the need to select an item in standard listbox then click a seperate button). I want to add these panels to a panel on a form, at run-time, based on rows in a db.
If I try adding any arguments in the New() section of the class file it won't let me use the panel in my toolbox. Is there a way to pass arguments to custom controls, I need a new custom panel for each row in a db so need to pass an id to it to specify records; or even load the records in my application and create a new panel for each record, using info passed to it to fill in the labels on it. Or can I create the panel at run-time and refer to labels within the custom controls, setting their .text properties that way?
I would like to expand my knowledge of VB.NET and was looking at creating custom user interfaces or custom controls. The type of things I am thinking of is: [URL]s. How are those controls created? I imagine it involves using the existing controls in Visual Studio as a starting point, and altering them to suit your design?
View 2 RepliesI'm not going to post my code for my transparentlistbox class, but here is a link to it.It's been working fine as is, until early this morning when I tried to set a different size.[URl]..For the longest time I placed a normal listbox control on a form and resized that, setting a new public variable of transparentlistbox to the same size/location as the original listbox, setting the visibility of the original to false, and adding the transparentlistbox to the form (me.controls.add).It looked like this:
[Code]...
Now, since I've moved some buttons around on my main form, I resized the original listbox control to be wider (same height though). When I tested, the transparentlistbox (code didn't change still set to original listbox size/location), the size was that of what I had the original listbox set to, before resizing?
So, I commented out all of the custom drawing/paint events/etc I could find for the transparentlistbox and tested, still stuck to the original size. I stepped line by line debugging and verified that transparentlistbox1.size=listbox1.size indeed matched the new resized size (but didn't actually resize)?
Last I did was comment out the transparentlistbox.visible and put back the listbox1.visible and listbox1 does indeed show with the new resized size? I'm not quite sure what to test next?
Is there a way to use SVG in vb.net to draw custom controls? Or any other way?
View 3 RepliesIs it possible to have a custom control (inherits from Control) and add sub-controls to it (like, a label for example)? Basically I want a composite control. I know controls can contain other controls, but if I try to add a control to MyBase.Controls, this doesn't work because that's readonly.
[Code]...
i need to create custom controls for my apps so how can I do that? Do I need a special software to do that?
View 3 Repliesinherit from two classes in VB.net?We are developing Custom User Controls that inherits from say System.Web.UI.WebControls.Label. We are planning on implementing a bunch of these controls but they will share mostly the same additional properties. We are hopeful about centralising these properties.I have looked into interfaces but it seems they only 'contract' properties you need to implement.
View 2 RepliesI've been working on a few large custom controls, and I noticed that when I use them, my memory starts ballooning. If I add a control at runtime, it increases the memory, but when I remove the control, it decreases less than it increased. However, it would stop balooning at some higher value. So if go back in forth between pages (which adds and removes the control), the memory would look something like this:
1,000K|5,000K|4,000K|9,000K|8,000K... 20,000K|25,000K|21,000K|25,000K|21,000K|25,000K... etc I know it takes a while for the GC to run, but the memory would stay consistantly high for long periods of time.
I tried writing a Closing routine, where when I called it, the control looped trhough its children and disposed all the internal controls, which seemed to help a little, but the memory after running the control and disposing was still much higher than before running the control. I also use custom event addhandlers. Should I remove all these as well. It would be nice if I received a little guidance on this.
I am new to VB 2008 having spent most of my time in 2003. What is the recommendation for the best place to get a primer on creating custom controls in VB.NET. I prefer to use VB directly and not the WPF.
View 2 RepliesI have a custom control I'm creating. When I click on it, it draws a dotted border and puts some nubs on it for resizing. This all works perfectly. Now I want it so when I click off of it, it deselects. I already have a variable to set up if it's selected or not and subs to draw/clear it. I just have to be able to detect when something else is selected or it gets clicked off of.
What I've Tried
My first and best solution to this was to use the LostFocus event, but, by custom control apparently won't let it fire. After some research, as far as I know, custom controls don't have Focus events because they are custom and could be changed (basically, you have to implement the focus events yourself).
My Question
Does anybody have a solution to either implement the focus events or a way to handle off clicking for custom controls?
Sources
Here is my controls current source:
Imports System.Drawing.Drawing2D
Public Class wDOMElement
Inherits Control
[Code]....
Is this possible? Must be surely but I've tried and come up short. I've created a very basic class (person) with 2 public properties, forename, surname. My user control is databound to this class and has 2 textboxes to store the properties.
I've built the control and can add the user control to a windows form but how can I add to a new user control (Staff) which will show my 2 existing textboxes and I can add dateJoined datepicker also??
I have created a customised checkbox control (only the text and border appearance has been modified), and wanted to loop through them in a User quizto see which have been checked and are correct. I have used the Tag property (set to 1 or 0) to identify incorrect answers, and tried to loop through with the following code:For Each thing As GMAW.MyCheckBox In currentParent.ActiveMdiChild.Controls
View 7 RepliesI have some custom controls in a specific project. I want to make these controls available to ALL my projects. How do I do this?
View 5 RepliesI got a third party control from a website after googling.Inorder to use that control, I simply right-clicked the Toolbox and selected "Choose Item". Then Browse to that dll file location and selected that file.Now it is added to the toolbox. But do I have to register the dll now ? Or, will it work when I distribute my app ?
View 6 RepliesI got this whole thing pretty well down (it's actually quite easy), but I've seen custom controls created where you can click that little arrow on the top-right corner and add things or change things about it.
How exactly is this done? I'd Google it (which is why you don't see me post here too often) but I really don't know how to describe it.
I currently do all development work in VB.NET 2008, winforms; but within 18 months will be switching to WPF (for better or worse). I have had great success using Matthew MacDonald's "Pro NET 2.0 Windows Forms and Custom Controls in VB 2005" book. This is an excellent reference focused entirely on the development of custom controls in windows forms. ( Many of the controls that I use have to have a very specific UI look and feel, so they end up being custom.
I'm looking for pretty much the exact same thing, except focused on WPF. MacDonald has a new book coming out on WPF in general ,but not on custom controls. Books are my preferred reference material, but any good web references.
I am trying to learn how to create Windows Forms custom controls in VB.Net by creating a .Net version of an old control I created in VB6. On this control, I have a UserControl with a Label (lblCaption), and several of the properties I add to the control should be passed to the label.This is the code I tried for the ForeColor property:
Code:
Protected mcolForeColor As Color = Color.FromKnownColor(KnownColor.ButtonHighlight)
Public Overrides Property ForeColor() As Color
Get
[code]....
When I change the ForeColor on the control in my test project, lblCaption does change to the color I selected; however, when I run the application, the label changes back to the default (button highlight) color, and the value of the property is also reverted back when I return to the form designer.What would be the proper way to implement the ForeColor property on a custom control?
I need to know how to make Custom Windows Controls?
View 2 RepliesFor some reason one of my controls produces the following excecption error when adding to the VS ToolBox:Request for the permission of type System.Security.Permissions.SecurityPermissions, mscorlib, Verion=2.0.0.0, Culture=neutral etcWe have identified it is this class within the Custom Control but we not sure whyit is erroring
View 2 RepliesI have a form named VBProject It has two TextBoxes and one custom control named MyControl which is created in another project.MyControl's project has a form inside, named Form3. When My control is loaded it needs to find all controls in my VBProject and add them into a listbox which is in Form3. Then Show the Form3. In the end ListView need to shows name and text of textboxes but it shows nothing. Here are my codes:
MyControl's Load_Event:
Dim i As Integer = 0
MessageBox.Show("Control Count:" + Me.Controls.Count.ToString)
For Each MyObject In Me.Controls
If TypeOf MyObject Is TextBox Then
[code]...