Show A Form That Is Located On A Dll?
Sep 27, 2010I have this main form, that uses dll's to get information. One of them is to have a preview of a video. So the one dll has its main class, that contains this.[code]...
View 8 Replies
ADVERTISEMENT
Label To Show Data Located In Another Form
Apr 25, 2012I am new to VB. I have created some labels/textboxes in my Form1. I use them to do some calculations. Basically, this is my calculation area (in Form1) and then I want some of the results that have been calculated and showed in these texboxes to be shown in labels which are in another form (Form2). So here is what I have done in terms of coding:
Label12.Text = Transactions.ComboBox1.SelectedItem
Label13.Text = Transactions.ComboBox2.SelectedItem
Label14.Text = Transactions.ComboBox3.SelectedItem
Label15.Text = Transactions.TextBox1.Text
Label16.Text = Transactions.TextBox2.Text
These codes are in Form2 and Labels 12-16 are in my form2 as well. My form1 is called Transactions as you can see. Everything looks OK, when i run no errors, also when do the calculations and I go from form1(Transactions) to form2, labels 12-16 show the results from form1 but the problem when I go back to form1 and change the values and go back to form2, the labels 12-16 are not changed. They simply show the old values regarding of the fact that they have been changed in form1. So how can I make form2 to show them correctly, to refresh the form or what?
C# - Persist Dropdownlist Selection Located In A Control Located In A Masterpage?
Apr 1, 2012I have default.aspx used masterpage, in master page i have a control called DefaultMenuContent, this control have a dropdownlist with autopostback, the problem is loosing the selection even if i use Is Not PostBack in control's load event, how to persist the dropdownlist selection?
In Master:
<asp:ContentPlaceHolder ID="MenuContentPlaceHolder" runat="server">
<art:DefaultArabicMenu ID="DefaultMenuContent" runat="server" />
</asp:ContentPlaceHolder>
[code]....
Get Form Name The DataGridView Is Located On
Jan 15, 2012I have a DataGridView that is embedded in a TabPage of a TabControl and the TabControl is embedded in a SplitterPanel of a SplitContainer and the SplitContainer is embedded in a ToolStripContentPanel of a ToolStripContainer which is on a Form. I want to get the name of the form the DataGridView is on, how do I do this?
Note: Sometimes in my application the DataGridView will not be embedded in any control other than the Form. So I would need this code to work no matter what the DataGridView is embedded in. For example, if I send my DataGridView as an argument to a function how can I get the name of the form the DataGridView is located on?
[Code]...
How To Access Variable Located In Private Sub On Same Form
Jul 25, 2009How to access a variable that is located in a private sub and then display that variable in another private sub located on the same form.
My actual code is:
Public Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Dim strFileName As String
strFileName = OpenFD.FileName
OpenFD.InitialDirectory = _
[Code] .....
Obviously, the sub in blue has nothing in it currently and so this is the one I would like to access the variable in. The variable I want to use again is 'FILE_NAME'.
Loading An Image That Is Located In A Folder Created On Another Form?
May 23, 2012show me how to Load an Image that is located in a Folder created on a nother Form. Public Class CroppingForm Private Sub CroppingForm_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load PictureCropper.Picture = Image.FromFile(MainForm.CurrentFilePath, "PreView Photo.bmp")
End Sub The Image that is sepose to be loaded into PictureCropper is named "PreView Photo.bmp"
By using: PictureCropper.Picture = Image.FromFile(MainForm.NewImage)the Image is being loaded correctly.
Unfortunately this is going to be a problem later on, for a Image with a diferent name will allso have to be saved to the before mentiond Folder. That is the reson for var."CurrentFilePath" it mast hold te Folder Path only "D:DIY.ID Photos"
[Code]...
VS 2008 : Press A Button On A Web Page That Is Not Located Within A Form?
Jun 7, 2009I need to press a button on a web page that is not located within a form, so how do I press a button according to its html element ID?Here is the HTML for the button by the way.:
<input id="i0011" class="css0088" type="submit" value=" Sign in " name="SI"/>
I had to use the code tags.
VS 2010 Have A DataGrid In A Form Docked As Fill And Have It Located Below The ToolStrip?
Jan 9, 2012I want to have a DataGrid in a form Docked as Fill, and have it located below the ToolStrip.What I mean by Docked as Fill is I want to be able to resize the DataGrid along with the Window Form.When I select Dock as Bottom, the space between the DataGrid and ToolStrip changes as well.
View 1 RepliesShow Information From A Datagrid Cell To Show Up In A Text Box In Another Form
Jun 8, 2011how do you show information from a datagrid cell to show up in a text box in another form, this is for a college project.
View 1 RepliesMake The "Preview" Tab Show A Preview Of The HTML Code Located In The TextBox In The "Code" Tab?
Sep 20, 2009I have been working on an HTML editor, and I need to know how to make the "Preview" tab show a preview of the HTML code located in the TextBox in the "Code" tab.
View 37 RepliesMdi Form And Show Form - Error "Form That Is Already Visible Cannot Be Displayed As A Modal Dialog Box"
Jan 26, 2010I'm new in .Net and I have an application with windows form "LOGIN" When users enter the user and password and click "ok", then if user passes validation then I have the code Show(MDIMainMenu) (I'm trying to open an mdi form), but I receive the following error: "Form that is already visible cannot be displayed as a modal dialog box. Set the form's visible property to false before calling Show. Error Number 5"
[Code]...
Multiple Forms - Declare And Instantiate Second Form On Program Start - Use Button Simply To Show Form?
Jan 14, 2010I have a program that uses two forms. The program opens to the Main form, and the user can navigate to the other form from the Main form through use of a button. Here's the way I've currently written it: When the Main form loads, it declares and instantiates the other form during the load procedure. When the user presses a button, the second form is displayed by means of the ShowDialog method. On the second form, there is a Return to Main Screen button which closes the second form, bringing the user back to the Main form.
So, here's the structure of the code:
Code:
Public Class frmMainForm
Dim frmSecondForm As New SecondForm
Private Sub btnSecondForm_Click(blah, blah, blah) Handles blah, blah, blah
[CODE]...
Here's my reasoning: Originally, I wrote the code so that a new instance of the second form was created every time the button was pressed. The problem was that whatever data was displayed on the second form, previously, was lost when the user returned to it a second time. Since the user would be switching back and forth between these forms, frequently, I needed that data to persist.
What is the best practice for accomplishing this:
1) Declare and instantiate the second form on program start, as I have done, and use the button simply to show the form?
2) Declare and instantiate the second form each time the button is pressed but maintain the variables on the Main form and pass them ByRef to a custom constructor for the second form? Is this even possible?
3) Something else?
Create A Stopwatch In One Form And Another Form Show My Progress Bar Using A Combo Box
Nov 11, 2011Im trying to create a stopwatch in one form and another form show my progress bar using a combo box for mins and seconds to show the progress bar on form1 1
[Code]...
Use A Progressbar To Show On Main Form And Then Finish When Next Form Is Loaded
May 12, 2009I am trying to use a progressbar to show on main form and then finish when next form is loaded, I have got this code.
1. When I click on button, it must open next form, but the next form must only open when the data in my list box has been loaded from Access Databse. When I run my program, it only shows the progressbar and don't open the next form.
Main form code:
Public Class Main
Dim PB As ProgressBar
Private Sub main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
[CODE]............................
.net - Open A Form With Form.Show First Mouse Click Is Ignored?
Nov 12, 2009Using the code below:
Private Sub ShowDropDown()
Using f As New DropDownForm
f.Visible = True
Do While f.Visible
Application.DoEvents()
[Code]...
This was a guess, after looking at the Form.ShowDialog method in reflector.My question is, is there a managed call I can make to acheive the same result, and what does a button click do that other clicks don't?
ETA: The problem does not occur if I open the form using a key.
Form.show() Loosing Context In Originating Form?
Nov 8, 2011This is a database app where I am trying to check for possible duplicates and give the user the option to keep the new record or assign to an existing record.In form1 the user will enter data into a textbox. I use this information to build a bindingsource.filter. Then I call another form (form2.show()) to display results to user and get user response. This part all works correctly.
The problem is that as soon as form2.show() executes, I loose the contents of the textbox - and it appears that I am no longer in the bindingsource.addnew() method.
Show A Particular Form For Every Button The Form Is Opened In A New Window
Mar 5, 2009Iam creating an application. i have a main form it has 5 buttons i have created 5 more forms. my aim is to show a particular form for every button the form is opened in a new window i dont want to open in a new window it should be embed in the main form when i click anthor button it will show the related form in place of previous form
View 2 RepliesShow A Particular Form For Every Button The Form Is Opened In A New Window?
Mar 5, 2009Iam creating an application.i have a main form it has 5 buttons i have created 5 more forms.my aim is to show a particular form for every button the form is opened in a new window i dont want to open in a new window it should be embed in the main form when i click anthor button it will show the related form in place of previous form?
View 1 RepliesVS 2008 Close Current Form And Show Different Form?
Sep 4, 2009When I use
Me.Close()
Form1.Show()
It closes the whole app.
How would I change it so that it only closes the current form while opening a new one? EDIT: I put [Not Resolved] Because I accidently pressed the resolved thing
Show Another Form And Unload The Current Form ?
Oct 14, 2009i used to write the code to show another form and unload the current form it always told error on UNLOAD form2.show unload me Do i have to use the code :
.Dispose()
or is there another suggestions
Creating A New Form On A Old Form , Then Hide & Show Them?
Dec 5, 2010I have two forms , and I want write a code like ( form2.show=true & form1.show.false)
View 2 RepliesForm.Show From Another Thread Hanging Form
Jul 25, 2011I have a series of methods being called for my networking code. An event gets fired from the networking thread. Inside this event, which I've hooked into from a singleton class, I route messages to form level methods which they register on form load to handle certain messages they care about. Inside of these form message hooks I need to close the current form (which I was able to do) but also show a different one (which is giving me the trouble).
[Code]...
Show Info Form Exel To Abv.net Form?
Jun 11, 2011I want to use a form in vb.net 2010, so when I click on a button ,it must show me the info of a specific row in Exel and display info of that row in a text box.
eg.
Name Surname phone
Koos Leeds 08212122392
How do I start with this, any samples.
VS 2008 : Why Instantiate A Form Instead Of Form.show
Dec 18, 2009why I need to instantiate a form instead of form.show?
View 20 RepliesVS 2008 Form Show Form Hide?
Sep 28, 2009Private Sub HideShowTest_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.Hide()
[code].....
VS 2008 Form.Show / Form.WindowState?
Oct 26, 2010I have a dual monitor setup on my computer. My program has multiple forms. I've designed the program to check which monitor the main form is currently on and to open the secondary forms on the current monitor. When the main form is on the primary monitor the secondary forms open as FormWindowState.Normal which is the design-time setting for the secondary forms. If the main form is on the secondary monitor and I click to open a secondary form then the secondary form is to be displayed as FormWindowState.Maximised.
[Code]...
So I moved the Form.Show line to after the Form.WindowState line. This works fine when the Form.Show process is very quick. The problem is that one of the secondary forms downloads some information from the internet so it takes about a second to finish the Form_Load process. When I had Form.Show first the form would not appear on screen until the Form_Load process is complete, so the delay was in the form appearing at all which is how I prefer it. With Form.Show last the form appears on screen immediately but appears mostly blank and unresponsive until the Form_Load process completes.
I would prefer that the form not appear at all until the Form_Load process is complete but I would like it to appear in an already Maximised state. Is this achieveable? It doesn't seem that complicated but I just can't figure it out.
How To Read A DVD That's Located On HD
Jun 17, 2007Trying to get this for the last couple of days,but can't figure it out.I found a DVD class in vb.net but how can you tell it what Drive it needs to look for and also to a folder on your harddisk?
I found this one DVD.DVDDirectory = "c:dvdmovievideo_ts"but i'm getting all kinds of weird errors, that its not compatible?
Anyone knows how to do this correctly?I'm just trying to get a overview from a DVD that shows all the titles and chapters/ sound etc..
Detect A Located Server?
Sep 1, 2010I did a little research to find a source that would check the proxy server whether if the server is a located at government or fbi's server, but I couldn't find what I am looking for.
View 10 RepliesLocated Files Locally?
Jul 1, 2010Well whenever I reference a file I have been doing so using the full C://location/here kinda way, but my next program will be on CD so I need to figure a way to locate files that will be on the CD drive.In other languages I have used, %A_ScriptDir% and then go from there, is there something similar in vb?
View 10 RepliesRun A Vb Exe File Located In Another Computer?
Nov 23, 2010Is it possible that i can run a vb6 exe file located in another computer using my vb.net program? how?
View 4 Replies
