I am writing a little 'macro' functionality into my multi-line textbox. All is ok except i don't know how to move the cursor up, or down, lines to simulate pressing the keyboard arrow keys (left and right are no problem). Obviously lines can wrap so using substring may be out?
View 4 Replies
a user copies multiple lines of text (say, from an email) into the clipboard. Based on my observations, when one tries to paste the text into a single-line textbox, only the first line is actually pasted in. (I am aware that the "obvious" solution would be to set the Multiline property to True, but there are reasons I am looking to avoid this and to put multi-line data into a single line.)
In the TextChanged event handler, I wrote code that parses the clipboard data to successfully convert it to a single-line, comma-delimited format.
Private Sub txtMassTrackingNo_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) _
Handles txtMassTrackingNo.TextChanged
[Code].....
This is a WinForm VB.NET application. Please see the picture below:How to add a line break in a multi line textbox in Visual Studio designer's property section?I tried using abc & Environment.NewLine & def but that was not working.
View 2 Repliesi have 3 multi textbox's .. and one button. it should lookup for the strings or numbers that available in the first textbox and not available in the second each string or number in new line.. and put it in the third on button click::
for example the user writes 200 name in the first textbox and 100 name in the second... and he click the button... it should appear the names that are not Available
so ..how to select a Specific line in the multi textbox and get the text from it?
I have a ML TextBox that gets data added into it every 5 seconds. It has a Vertical ScrollBar on the textbox.My problem is that I want to always see the latest data entered but the scroll keeps readjusting to show me the first data entered.
View 2 Repliesi have a string of number in clipboard:
1001
1002
1003
1004
how can i paste the numbers in a multiline textbox by clicking a button?
i try use :
txtProdIDs = Clipboard.GetDataObject "txtProdIDs is my multiline textbox
the system said: Unable to cast object of type 'System.Windows.Forms.DataObject' to type 'System.Windows.Forms.TextBox'.
how to export from notepad to Textbox multiline.
Ex:
form Notepad is;
1,2,3,4,5,6,7,8,9,0
to Textbox1 is;
[Code].....
I have a textbox control (multi-line enabled). Is that possible to assign it a background image?
View 2 RepliesI have a web control in which I have a multiple line text box. I'm updating the contents of the text box using a timer_tick event. I want to display the last line of the text box every time the timer_tick event is fired.
View 1 RepliesI have a multi-line text box with hundreds of lines. I would like to be able to scroll up or down in the list using the mousewheel (much like using the pgup/pgdown keys). I think I need to use the .mousewheel event, but I'm not sure how to implement this. Is that supported out of the box, or do I need to hook the mouse?
View 2 RepliesSo what happens is. I have this JAVA Code which i am making out of a vb form to help me develop quicker in that. So, when i click "Button1" a formula enhances and gives an output "TEXT" Which i want to choose what lines it shows on my "MultiLine Textbox".
Basically, How do i make it so when i click a BUTTON a text is written in a MULTILINE-TEXTBOX which i get to choose which bits of the text goes on which line.
the example is:
("this goes on line 1")
("this goes on line 2") ect.
I want to implement a fancy scroll bar for a multiline textbox like the picture below[url]....
View 2 RepliesIs it possible to move the cursor position in a multi line textbox? Here's an example; I have a form with a multi line textbox and a button. The button inserts several lines of [Code] How could I make the cursor go to the blank line between the parenthesis? [Code]
View 4 RepliesWhat I am trying to do here is search a multi-line textbox that contains the source of a particular website.what I would like is something like this but i do not know how to right it like i need
Dim MyString, FirstWord, LastWord, MidWords As String MyString = "Mid Function Demo" ' would be the textbox FirstWord = Mid(MyString, 1, 3) ' Returns "Mid". LastWord = Mid(MyString, 14, 4) ' Returns "Demo". MidWords = Mid(MyString, 5) ' Returns "Function Demo".
this function works fine only when you define len.what I need is a function that will do something like this, "note obviously interpreted code"
Dim text, A,B,C as string text = textbox1 A = "<body>" B = "information between A and C being of variable len" C = "</body>" textbox2 = B
I do not want anything like,
remove "<>?|?()}{][" etc.
I have several multi-line textboxes that I want to lose focus (i.e. when the user presses the right arrow key) but the control wil not relinquish the focus.Simply put, I first verify if the selection start is at the end of the text, if it is, and the user presses the arrow key, it should move to the next textbox. some debug.print code placed in strategic locations indicates that the target textbox gets focus and immediately loses it and the source textbox gains focus once again. Essentially not allowing the textbox to lose focus.
Select Case
Case Keys.Right
tbRight.Focus()
[code]....
After changing the source textbox multi-line property to false, it behaves as expected. Is this a "feature" .. surely I don't have to resort to "SendKeys"
I have redirected the results of the command prompt to a multi-line textbox and i want to get the line number of the error. [code] how would i get the line numbers? it should get 90,92,95.
View 4 Replieshow to redirect outputs from console to a window form text box,but the console application I'm using is always running real time, thus my .net application hangs until I close the program that is read real time.The code displays the application to a 2nd form with a textbox multi line. Until I close that my entire program hangs and the console application monitored runs.
How do I code it to:
1. Run real time without hanging the entire program.
2. the console app must run at all times. (figured how to hide/ and no window created for it)
Sub Console()
Form2.Show()
Dim myCon As New Process
myCon.StartInfo.UseShellExecute = False
[code].....
I've been trying to feed a multi line textbox into a string array then check item by item if a string contains part of it.
[Code]...
Ok, So I have a string that has its formats like this:
Line 1
Line 2
Line 3
[code].....
I have a textbox in my application and it is set to multiline.I have the following information in the textbox..How can I can to read the second line of the multi line text box [code] So The messagebox should say "100 London Road"
View 4 Repliesave 40 textboxes in my form. A Combo box is associated to each of them. When users selectform first combo box an arrow should be drawn from fist textbox to the next textbox (next textbox might be next textbox or a textbox in the middle of the form!)I know there will be at least 16 Arrows at the end of each usage.
View 5 RepliesI have a group of textboxes for a tab editor. 6 vertcle, 25 horizonal. ( numeric guitar sheet music) I want to be able to navigate them with the arrow keys. If I number them in chronological order from the bottm left, the up arrow key would be "+1", down arrow key "-1", the left key "-6", & the right arrow key "+6". That way I can navigate any possible way on the array. My question is, "How do I do this in code?". ( I have never had a school coarse of any kind in programming-learning VB Express at home.)
View 11 Repliescan somone just post a code of
1. Writing the last line of .txt into textbox1
2. Adding line from textbox to .txt
I am trying to read in a TextBox line by line and take the first 7 characters of each line and output everything in another TextBox.This is what I have so far.
Dim line, lines() As String
lines = TextBox1.Text.Split(Environment.NewLine)
Dim i As Integer = 0
[code].....
Does Anyone know How to read multi-line strings? I am using XmlWriter to write a Multi-Line Textbox to an Xml Document. The Trouble Is I can't figure out how to get the reader to read that multi-line element. I know the writer is writing it in multi-line, but the read just squashes the lines together. Does anyone know how to read that multi-line element properly?
View 4 RepliesIs there a multiline and wordwrap for a label? If there is I would like to know how.
View 3 RepliesI am having a slight problem whenever I use the multi-line option with labels. No matter what computer I am using, as soon as I accept the text each line seems to move and seems to get worse when I change font types and size.
View 5 RepliesI have just started using Balloon Notifications in one of my apps for work but need to put the text on multiple line.
Here is my code:
nfi_Pick.BalloonTipIcon = ToolTipIcon.Info
nfi_Pick.BalloonTipTitle = Picked_By & " Added A New Item"
nfi_Pick.BalloonTipText = Desc & " --> Branch: " & Item_Location & " --> Can Be Sent Today!"
nfi_Pick.ShowBalloonTip(3)
But it puts the "Can Be Sent Today" on the same line.
Currently i have this code:
If InStr(1, UCase(TextBox3.Text), TextBox2.Text) <> 0 Then
End If
which sees if text from textbox2 is in textbox3, but if there are multiple lines in textbox3 then it wont search.
how do i send the contents of a text box to a printer, i have delecared a new print dialog but cannot work out how to pass the parameter of what to print?
View 3 Replies
