I have an Access table which has a Number field and a Text field.I can run a query like this:
SELECT * FROM Table ORDER BY intID ASC
//outputs 1,2,3,10
But when I try to run the same query through the .NET OleDB client, like this:[code]......I get items in the order 1,10,2,3.What's going on here, and how can I have the data sort "naturally" (1,2,3,10) in both places?
how do i do bubble sorting with numbers?
View 1 RepliesI used a ListBox control, and I assifned to it a list of random numbers, then I sorted the ListBox by usign ListBox1.Sort = True BUT the sorting operation is NOT right! Example of Random numbers: 1,5,7,11,12,4 After sorting: 1,11,12,4,5,7 Whixh is not right, How to make it: 1,4,5,7,11,12 Q: How to make a ListBox deal with numbers as numbers NOT as text!?
View 7 RepliesI need to sort three numbers that are entered in three different textboxes and display these numbers ascending and when I press a different button display them descending. Now I think that I need to put these three numbers into an array, sort and display, but I'm not really too proficient in code to accomplish this. Is there a way to do this without putting them into an Array.Which is not much of anything so far.[code]
View 13 RepliesLets say I have the following String Array:
Code:
dim strArr(3) as String
strArr(0) = "15 Joseph"
strArr(1) = "24 Nick"
strArr(2) = "3 Mike"
[Code]...
I have a datagridview with a column called "Total Price". This is set to a string value type because I need to always show 2 decimals. For example:
4,3
must be in the datagridviewcolumn:
4,30
So I use string.format for this. However, now I have a problem with sorting because the column is a string value type and numbers get sorted like this:
50
4000
40
300
30
20
10000
1
How to override the sort method or something that is called when a user clicks on the column header and the most effective way to sort it programmatically?
I have 20 textboxes. each contains a particular number . I want the textbox1 to textboxN to have the numbers in the descending order. If any of the textbox has a zero value then I want to leave that textbox as it is. A sample code in vb.net needed.
View 2 Repliescan someone give a example of doing bubble sorting with numbers the simplest way if possible.all i know is that it uses a boolean to stop sorting, a variable which records how many swaps are done in a run if its 0 it stops swapping but other than that i dont know how to write a program doing bubble sorting?
my teacher didnt give me any examples of bubble sorting other than a algorithm, and before u ask no its not for homework i am looking bck at my computing notes and i just dont understand any of it!
if u could explain it to me step by step and give a simple brief exmaple using numbers
How to sort numbers from lowest to highest in my datagrid table?
View 3 Repliesi've implemented a system on vb.net 2010 having its database on Ms Access 2010 (.accdb). i have to read records from the tables to a combo box by binding its datasource to the tables directly. the problem is that the data in the combo box is not sorted since in the database itself the records are not sorted. how can i achieve the sorting?
View 1 RepliesI'm having my program sort an excel sheet by a few columns. However, it is only sorting by the first column not the rest that I specify.ere is my sort code below:
myRange.Sort(Key1:=myRange.Range("A:A"), Order1:=XlSortOrder.xlAscending, Key2:=myRange.Range("G:G"), Order2:=XlSortOrder.xlAscending, Header:=XlYesNoGuess.xlYes, Orientation:=XlSortOrientation.xlSortColumns)
[code]...
I have a WPF ObservableCollection which is bound to a ListBox and I have a Sort() method which when called will convert the ObservableCollection to a List(Of T), and undertakes a sort based on a date/time column within the collection.
The data is sorted, even when new items are added to the ObservableCollection, however the date/time isn't being correctly sorted. The data is sorting based on the date however it is very much random when it comes to the time portion. The following is an example of the outcomes I am experiencing:
[Code]...
Is there anything that I am doing incorrectly in this method that would cause the time portion not be included in the sort? Is there a better way of doing a sort?
Possible Duplicate: x86/x64 CPUID in C# I need to retrieve CPU's serial numbers. When using WMI, it is called CPUID.My goal is to access that information WITHOUT using WMI. Unmanaged is code is fine?
View 2 RepliesI input a value with decimal numbers in textbox to save a records in access..when i try to open an access, and it's value is whole number...
View 4 RepliesI have an Access database file, which the application needs to connect only when it needs to run a query. The database has five fields. The first two fields contain numerical values (double). The rest are text values.
Well, I don't have trouble accessing the database file. In fact, I don't have trouble running a query on those three fields containing text values, either. But I have trouble making a query on numerical fields. If I run the following, the application will exhibit a data mismatch error.
'MyConnection As OleDbConnection
'MyAdapter1 As OleDb.OleDbDataAdapter
'nIP is a large number like 3647665152
[Code].....
I am taking data from a datagridview and storing it in an Access 2007 DB table
using the Datatset/TableAdapter Update command.
'Add rows to Table'
FoodDatabaseDataSet.Meals.Rows.InsertAt(DR, MealsRwCnt)
'Update Data Base'
[Code]...
IN my daat access layer, the stored procedure returns value of the format "CCT1". But i need to format that value to "CCT00001". Should i do this formatting in the data access layer or in the business layer?
View 4 RepliesI'm trying to add a string to a access database, for a column that was originally designed for numbers, i have changed the data type under the design view from number to text, yet I still get a error saying that it cannot convert the string expected int32
Input string was not in a correct format.Couldn't store in Parent_ID Column. Expected type is Int32.This is the full exception, i would have put it into code display but the option wasn't there
System.ArgumentException was unhandled
Message=Input string was not in a correct format.Couldn't store <A-238> in Parent_ID Column. Expected type is Int32.
Source=System.Data
StackTrace:
[code]....
I have six textboxes, and upon button press it randomly generates six numbers, one in eact text box e.g. [43] [85] [93] [1] [0] [17]..i create another six textboxes and at the same time allocate these numbers in ascending/descending numbers.I am not looking for any codes whatsoever, as i love the challenge of VB.Net.
View 2 RepliesIm trying to write a program that will do:
1.The average of the four numbers. This answer will be placed into a text box reserved for that value. This text box cannot be changed by the user.
2.The maximum and minimum values. These will be denoted by changing the color of the largest number green and the smallest number red.
3.The range of the numbers. The range is defined as the difference between the largest and smallest numbers. The range will be placed into its own text box, labeled as such. This text box cannot be changed by the user."
Im using visual studio 2008 and it has to be written in VB
So how would I use .next (random numbers) to randomly select something from a list of numbers but it can't repeat the number?I could do:
dim num as integer
dim r as new random
num = r.next(1,5)
if num = 1 then
elseif num = 2 then
etc.
That wouldn't work because it would repeat.If I donwload someone's game can I disect it in VS? :0 I tried going to open project, then I went to the folder and clicked open. It brought me inside of the folder so I tried to open the game but there is no form1 there. It says the games name then .exe in the explorer-like thing in the top right?Also, how would I have a value or something in a label and access it from a button.
Example:This is in a label.
Dim number as Integer
number = 0
Then in the button do
Label.number = 0
How would I do something like that? I want to use that a lot as I did in a different language.
I have a program that allows a user to input numbers from an inputbox and it displays the Total numbers entered, the sum of the numbers entered, and the average of the numbers entered. What I can not seem to find it how to have it display the largest number entered. The code I have so far is,
[Code]...
how can i add two excel sheets with numbers and the equal (similar)numbers to save once
View 1 RepliesI am making a program, where the user enters 6 numbers in 6 different text boxes, and it displays the larger of those 6 numbers. But I also want to make it where if the user enters a string value (like S for instance) in the text boxes, it gives an message and says "please enter the numbers again" and the user gets to enter the 6 numbers again. But when I do try to do that, it gives an error message saying conversion from "w/e the user entered" to Double is not valid. If the user just enters the numbers, it works fine. However, I am trying to make it if the user does enter non numeric value, it gives a message window and the user can reenter the numbers again.
Here is my code Example
CODE:
This is where I am trying to use IsNumeric to show a message if a user does not enter a string so the user can renter the numbers again, but when the user does enter a string value (say in textbox 1) it gives me an error message saying conversion from "S" to 'double' is not valid.
CODE:
Then right here this is where I have my series of ifs statements, this part works fine, it displays the largest numbers of the 6 textboxes every time. Error free.
CODE:
And do this with variable number 2, 3, 4, 5.
I know there are easier ways to do these with arrays and stuff. But I am not there yet. I am still learning about ifs and stuff.
I have just about completed a .NET project to write a program to randomly select numbers for a Bingo caller. Over the last month or so Ive learned a lot about .NET but heres something that I consider to be odd and maybe one of you guys can offer an opinion.
One of the features of calling Bingo in a small local club is that callers often use little sayings to accompany certain numbers, I expect youve all heard of (say) All the sixes, clickety click for 66 or 5 and 9 the Brighton line for 59 etc. My little program gives an option to incorporate these with a prompt for the caller that can be edited outside of the program. One of these conventional sayings is used when a number is reversed 12 followed by 21 or 45 followed by 54 for example, when the caller might call (say) 1 and 2, one dozen, number 12 And the other way round 2 and 1, twenty one.
So, I programmed in a bit of code to detect this and to over-ride whatever might otherwise have been the quote with And the other way round and set about testing it. Ive been through literally dozens of full 90 calls watching for the occurrence of a reversed number, spent a few hours doing it, and not once has it occurred which is to say the least, unusual.
So, Im wondering about the Rand Function, could it be that it isnt possible for a reversed number to be selected? Just so you know, I randomly pre-select the order of all 90 numbers, I fill each of the 90 elements of an array with a random number first checking that the number selected hasnt already been stored, if it has, I just get the next random number (and check that too of course), but I cant see how that could prevent reversed numbers being selected, especially in light of the fact that frequently it's not the 'next' number that's used.
am writing an system application for a company that must generate inquiry id and order id automatically. Whenever a customer makes a new inquiry or new order by clicking the add button, an automatic number should be displayed in the text box and when it's saved, it should be saved in the database access.
View 9 RepliesHow do you sort strings with numbers when you want numbers sorted based on their dimension?
View 19 RepliesSub five()
Dim i As Integer
For i = 1 To 14[code].....
I want the numbers that I was comparing similar numbers. I get equal numbers and ELSE giving all series.I like numbers 2 4 6 8 9 10
I would like to know how I can have an enumeration that has multiple values and can be passed to a function.
Example:
Public
Enum
ActionEnum
NoAction = 0
[code]....
I am working on an assignment that will display the forst 10 fibonacci numbers in sequence. However when my results are displayed, the numbers are all stacked on top of each other like this: 011235813213455. I have tried to play with it but i can't seem to get my numbeers to space out or even maybe have a comma "," betweeen each number.[code]
View 2 Replies