I'm trying a simple example of working with the ServiceController object. I have the code bellow:
[Code]...
The problem is, even thouh with this, the CheckStatus function is supposed to be ran every 100ms (timer driven), the text of the button and the color of the panel does not update. If I close the app and run it again, it will be correct, though.
Sometimes when updating the entire screen or moving around controls etc, there is some fairly bad screen flickering.
View 2 RepliesI use the following code to read the standard output from a command line application from a main winforms application, and then I use the BeginInvoke code to update a textbox with the status. What I am not sure about is if I can have a smoother process. The code loads up about 10 to 20 text inserts, and those are all seen at once... not a smooth process where each status is updated. Any thoughts on if the reading of the standard output and/or the beginvoke code could seem more smooth to the user?
Delegate Sub UpdateUIStatusHandler(ByVal StatusMessage As String, ByVal JobName As String, ByVal Direction As String)
Dim ProcessJob As New ProcessStartInfo(GSyncExe, RunJob)
ProcessJob.UseShellExecute = False : ProcessJob.CreateNoWindow = True : ProcessJob.RedirectStandardOutput = True : ProcessJob.RedirectStandardError
[code]....
[Code] i need a way to screen each employer status and mapping status before placing them in the DGV. I need to convert the numerical values to their corresponding status. 1 = Good, 2 = Non-Reporting, 3 = Under-Remitting and 4= Non-Remitting(which i already know how to do). I just don't know how to get the values being placed on the DGV. I would love to do this on oracle but i don't know how to.
View 11 RepliesI made a splash screen and want to have some text change on it as different parts of the program are loaded but the screen isnt updating when i use refresh or update.
[Code]...
I have notice that when a module is running the screen does not update properly.For example if I change a label to read "Please Wait..." The second half of the label does not display until the program is idle.Can I get the screen to update while its running.
View 2 RepliesI am working on a vb.net app that is capturing a screen shot then crops down to the "status bar" of a particular application this image is then converted to black and white. I crop off the left portion of this to compare to a preset image. this is where the app breaks as for some reason it shows the images being the same no matter what. here is where i think the problem is but i also attached full source in case its needed
[code]...
I have a program written in VB 2010 express under windows xp which does some heavy number crunching combined with serial communication. When it "gets too busy" it does not update the screen anymore (done simply with Textbox.text = "any text") and it does not respond to user input in any text box. Not even to a click on any text box. Is there a way I can get the program to do screen update and respond to user input while it is busy?
View 3 RepliesI have a very long running process that I start in a thread. This raises events with messages to say what it is doing. How can I update a label on screen with these messages? (The label is in an update panel if that makes it easier).
View 3 RepliesIf this has been answered elsewhere can someone point me in the right direction. Instead of having visual studio's update screen i want to have my own screen pop up within my mdiparent form and have abit on the popup where i can display the changes that have been made (i can try and work this out with text files etc.)
View 3 Repliesi have a screen capture running just as a picturebox on a winform updating with a timer... i have it so it shows my race in a game.... now all is running gr8 on my pc... im now looking to make it viewable to someone else thats connected to my chat server i have made a picturebox on the client form and have the capture code in my server im hosting on my pc...
so my question is how and what is the best/quickest way to do so? maybe memorystream? if so how do i go about that? how do i send a image over memory stream? or is there a better way?
Here is my insert statement:
[Code]...
Now for a succesful insertion i want to notify the user about a successful save operation.....i.e,i want to display a message "Successful Save Operation"to the user. How to do this using the Status Strip?
I've got the code to display the current browser status text in the status bar but i want it to display the name of my web browser aswell. Example: Dreamincode.net - (Name of Webbrowser)
He is my code for the displaying staus text.
Private Sub webBrowser1_StatusTextChanged( _
ByVal sender As Object, ByVal e As EventArgs) _
Handles webBrowser1.StatusTextChanged
[Code]...
BTW this issue occurs in any MS office program when the VB.Net (or even VBA) is processing information.Example: In Excel, a worksheet is displayed on the screen. I start either, a VB.Net or VBA procedure and within 30 seconds the Excel worksheet (previously displayed) blanks out. In both VB.Net and VBA,ScreenUpdating = False. My expectation is that the previously displayed screen would stay static as if I left my desk to get a cup of coffee; came back and the same ole Excel worksheet was still there?Of course, setting VBA Screen Updating = False accomplishes two goals: 1) speeds up processing and 2) saves the user from seeing unnecessary "garbage-processing" steps.Why does VBA or VB.Net ScreenUpdating = False not freeze the screen at the time of its invoking?
View 11 RepliesI have a gridview in which when I click edit, update, and cancel button comes. I have a variable named status. If status=false then update should change to insert and if status=true then update should be update itself.
<asp:TemplateField >
<ItemTemplate>
<asp:LinkButton ID="lnkEdit" runat="server" CommandName="Edit" Text="Edit">
</asp:LinkButton>
[code].....
I have a webpage with a form that is used to edit some object. This object contains a Collection of other objects defined like this: Public Overridable Property Employees As List(Of Employee)
On a form I can delete an employee, add a new one or modify existing one. When I click save new values are sent to the server. On a server I check if the user exists. If exists then I modify its values, if it does not exist then I add it. All employees that exist on the server and were not sent are marked as deleted (State changed to EntityState.Deleted). I try to use the following code (dbCollection = database entities, newCollection = collection sent from the form):
[Code]...
This code does not work, because changing to EntityState.Deleted removes the object from collection, and for each loop breaks, since the collection is modified...I know that I can overcome this problem by using a for loop or adding objects to delete to some other list first, but I hope maybe there is a pattern that would make my code nicer.
Currently I have the following VB.NET code to make a screenshot of my desktop, but it only takes a picture of the active screen:
Public Function SaveScreen(ByVal theFile As String) As Boolean
Try
SendKeys.Send("%{PRTSC}")[code].....
The following code is how I execute the above function, if it makes any difference, which I don't think it does:
SaveScreen("C:Lexer_tracescreen.png")
Now, I need to be able to take a picture of the entire screen, not just the focused window.
Now I'm creating at app in VB (Microsoft's, Visual Basic 2010) which will be in full screen but I want to know if I can put all my content in the centre of the screen. At the moment it's at the far top, left of the screen. When the screen size varies I want it will stay in the middle for all shapes and sizes. Like :
<div style="margin: 0 auto; width: 500px;"></div>
But this is for web pages using HTML and CSS.
I'm trying to get coordinates on my screen by holding down my mouse and placing it over different parts of the screen. I'm using the mouse_up and down events in a button to kinda simulate the mouse being held down. The problem I'm running into is that anytime I go past the button's bounds, the coordinates I want stop. This is what I have so far:
[Code]...
I have created a GUI and have set my 'Form1' window to match that of my PC monitor ( 1280x1024 ). However when i move the project to work on my netbook, the screen on my netbook is only 1024x600 and half my GUI is missing. Is there any way i can adjust my settings so that my 'Form1' GUI will auto adjust and display in full on both screen when i move the project back and forth?
View 2 RepliesI'm coding a splash screen in VB.Net that displays for 3 seconds then shows a login screen. But the splash shows up even when login shows and I have told the splash to hide. Here is my code:
[code]...
I send a message a while ago and no one answerd, how can I draw directly on the screen (not on a specific window) just on the screen, neither if it's on the desktop or anything else.Is there is any option to bring up the switch between applications window (Alt + Tab), I don't want to use sendkeys because the user need to keep the key down and I just want the user to select the application with his mouse.
View 3 Repliesim about to develop a small appliacation for a bet system, which needs 6 screens, each screen will be a touch screen for each client... the application will be running in one computer only just with 6 screens. my question is does anyone knows how to control each screen separately?. somethign that would allow me to output each forms in different screens would work fine.
View 2 RepliesI am making a program that will put a black mask over an application (like a full screened game). This black mask will fade in and out, depending on certain criteria. Is there a way I can do that with VB? It's to help me dim my monitor without having to push anything.
View 3 RepliesI wanted to make a screen recorder (not screen capture) program, but I am not entirely sure how to get it started. I have seen many videos and things on how to make one, but all of these just take multiple pictures and then don't compile them into a movie file, and I don't want to take many pictures (unless that is the only way possible.) I am using Visual Basic 2010 Express and I have looked at the Windows Media Encoder, but I can't seem to figure out how to use/implement it (yes, I have downloaded and installed it.) Maybe I can use some kind of ActiveX control?
View 3 RepliesIn my project is a form called "Secondary". It is suppose to appear on any and all screens (if any) other than the primary screen. The following code seems pretty logical to me, but Secondary is not appearing on any screen.
[Code]...
How can I get my screensaver to fill the whole screen. it has in the past but, just quit working several months ago. I have Windows Vista
View 1 RepliesI have a button btnRegEx that when pressed shows a ContextMenuStrip, similar to the '>' button in the Find/Replace dialog in Visual Studio when you are using Regular Expressions. I have a ContextMenuStrip cms which I show using its Show(x,y) method.
At first I was simply setting x and y (the location of the ContextMenuStrip) to some point next to the button, but I noticed that when the button is close to the edge of the screen it goes off screen. I wanted to prevent that so I built some logic into the x-y calculation. When the ContextMenuStrip width is larger than the 'remaining space left' I simply show it more to the left. Same for its Height of course. I am using the Screen.GetWorkingArea(point) method to determine the 'remaining space left'. As I understand it, it returns the working area closest to the point you specify (to which I pass the button's location).
As long as I stay on my first monitor, it is all working perfectly fine. The problem occurs when I move the form to my second monitor. The contextmenustrip is still showing on the first monitor for some reason...
Here is the code I am using:
vb.net Private Sub btnRegEx_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRegEx.Click
Dim p As Point = PointToScreen(New Point(btnRegEx.Left, btnRegEx.Top))
Dim x, y As Integer
[CODE]...
I have noticed that when I click the button when the form is on the second monitor, the buttons location (p) is calculated with the first monitor's top-left corner as (0,0), even though it is on the second monitor. This way, the GetWorkingArea function returns something like 1280, while the buttons x-location is something like 1700... So, how do I get the buttons coordinate relative to the actual screen it is on, rather than the entire dual monitor screens as a whole?
I am in a dual monitor environment. I have developed an application using VB.NET 2005.When I start my application, the splash screen always displays on the monitor where the mouse cursor is at, even if it is not the same monitor that the login and primary form open on.
View 3 RepliesVB.net / VisualStudio8 I have an application I've written that's been very stable. I had it set to exactly 1024x768 resolution, and to windowsstate=maximize (I think that's what it's always been).
I recently started coding to give the user the option to use the 1024x768 or to have the program detect the max size of the screen and use it.
That part works great... I'm using:
Dim MonitorWidth = Screen.PrimaryScreen.Bounds.Width
Dim MonitorHeight = Screen.PrimaryScreen.Bounds.Height
Me.Height = MonitorHeight
Me.Width = MonitorWidth
What I'm baffled by is that the application now won't get off the max screen size. It's using the max of the screen, even when I do not call the screen resizing code above. I'm trying to give the user the option of the application only taking up 1024x768 (and placed up to the top left) or maximizing the application using the full extents of the screen.