In the following, Response.Write poduces the expected result of displaying user name and password - but nthing is written to the text file (colocated in the root directory).
Imports System
Imports System.IO
Partial Class getCustomer
[code]....
In the following, Response.Write poduces the expected result of displaying user name and password - but nthing is written to the text file (colocated in the root directory).[code]...
View 2 RepliesI am writing each line to a text file:
Dim objWriter As New System.IO.StreamWriter(filename)
For Each x In tofile
objWriter.WriteLine(x)
Next
objWriter.Close()
Which works perfectly the only problem is is that when its finished it writes a blank line on the end of the text file which I don't want.
I'm getting a problem when writing text files using StreamWriter. The files read fine and they write fine if I'm not overwriting an existing file. They also write ok as long as I'm not writing over a file that only has one digit at the end of the name. For some reason when there are 2 digits at the end it crashes when I'm trying to save over an already existing text file. Here's my code.
StringForTextFile = "C:" & Folder4PS & "" & IDCodewDashOrN & "Series" & Series & "ScreenNumber" & ScreenNumber & ".txt"
LblTesting.Visible = True ' Testing
LblTesting.Text = "StringForTextFile = " & StringForTextFile
[code]....
above but 've tried all the different Encoding possibilites. Unicode, UTF32, UTF8, UTF7 as well as without those parameters listed where the close parentheses is right after StringForTextFile. I get the same result. If I'm writing a new text file that doesn't exist, then no problem or if I'm writing over an existing text file but it has 0 to 9 at the end then I'm ok but if I'm writing over an existing file and there is 10 or above(haven't tried triple digits or all values) then my application crashes. You see the test label in the code above because I was looking at exactly what file it was trying to overwrite and it is just as it should be.
Should I be using a different procedure? An example of a string that would cause a crash for the string StringForTextFile would be:
C:Name of My AppSeries1ScreenNumber10.txt
If it was being written for the first time then no problem or if the 10 at the end was 0 to 9 then no problem also. I've also tried and originally had it set up where there wasn't an If File.Exists(StringForTextFile) = True Then statement. It just always used the same code whether writing or overwriting and I wasn't having a problem that I remember. For some reason I started having a problem recently and I put the alternate methods of writing in.
I'm trying to write a file and I have this code so far.
Dim File As System.IO.File
Dim Write As System.IO.StreamWriter
Write = File.CreateText("C:UsersJoshuaDesktopCreation.txt")[code].....
When I run the code, the file is created but is blank. I can't find where the error is.
I have an issue with StreamWriter class. Basically, in an application running as a web service, I need to write info into a log file. When I send 2 web service calls simultaneously, the entries created in the log file are not correctly written. For example,
in call #1, ID 1 - xyz is to be written to the log file. In call #2, ID 2 - abc is to be written. When I viewed the log, it shows ID 1 - xyz & ID 1- abc. Looks like there's some memory data being shared and mixed together, even though it's totally 2 separate web service calls. From my understanding, each call (i.e. each will be process under a different application instance) should have its own set of memory allocation for data processing... If I am to make this application as a Console Application, it looks like everything is processed correctly.
im writing the contents of a few arrays to a file using StreamWriter, and am having issues with the syntax of the format function. Tried reading through the help files to no avail, can anyone possibly explain the syntax to me?
View 2 RepliesI have this procedure that is supposed to write out all the records in the dataset to a text file.
When I check the # of records in the dataset, there are 10813, but the procedure only writes 411 records to the file.
Private Sub btnDoItBest_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDoItBest.Click
Dim dlg As OpenFileDialog = New OpenFileDialog()
[Code].....
I am coming across a lot of odd and annoying problems in this program and have almost had enough lol.
I cannot figure this one out for the life of me. I have used streamwriter a hell of alot of times and never once experienced this. But basically I have a string array and I need to write the entire array to a text file with a new line for each array item. So I have gone ahead and done this:
[Code]...
However the outcome is the text file only contains 1 line and that line is the last item in the array yet I know the array has got at least 50 items in it.
encountering a problem when trying to write data to a text file. If I put the output into a messagebox I can see it, but when I attempt to write it to a file it is just blank. What am I missing here? EDIT - This is just a simple winform that I specify a path to a local HTML file in Textbox1 and I'm attempting to parse some HREF tag data.
Imports System.IO
Imports System.Text.RegularExpressions
Public Class Form1
[code]....
I need to add a row of data to an exisitng TextFile that is in Tba delimited format. My program currently used ADO to read and update the table but that was creating to many problems with varying 3rd party providers of the Text File.
View 14 RepliesI am writing a little utility to generate some SQL files. I have a file which is generated from a string array of 400+ elements. It stops writing (without throwing an error) at arround 1000 characters or 380 lines. I am clearly missing something here. Question is what? I've tried (the remed lines of) flush but that seems to have no effect.[[code]...
View 4 RepliesHere's my code to add new lines to my text file:
[Code]...
When the button is pressed the line is written to the file just fine, but if I restart my application, which calls Refresh_OtherLog() onLoad, it displays the lines of the text file as one line with the traditional square character depicting a character return. Why is it not putting that new lone as a new line in the listbox?
I am new to the forum I have been working on a GUI to export verification data to a text file. I have it set up to work at home but I would like to adapt the code so that it will write the text file to the directory that I use at work also. I have the areas commented out where things that I have attempted do not work. Here is what I have for code:
[Code]...
Is it possible to use the streamWriter to read a .txt file thats in a web address online?
View 1 RepliesI have some large csv files (1.5gb each) where I need to replace specific values. The method I'm currently using is terribly slow and I'm fairly certain that there should be a way to speed this up but I'm just not experienced enough to know what I should be doing. This is my first post and I tried searching through to find something relevant but didn't come across anything.
My other thought would be to break the file into chunks so that I can read the entire thing into memory, do all of the replacements there and then output to a consolidated file. I tried this but the way I did it actually ended up seeming slower than my current method.
Sub Main()
Dim fName As String = "2009.csv"
Dim wrtFile As String = "2009.1.csv"
[Code]....
I'm trying to use StreamWriter to write to a text file; it creates the file fine, but when I open it up, it's still empty. I marked the code below where the writing action takes place.
vb Public Sub BHorse_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BHorse.Click
Dim oMarketsReq As New BFExchange.GetAllMarketsReq
Dim oMarketsResp As BFExchange.GetAllMarketsResp
Dim BFWrite As System.IO.StreamWriter
BFWrite = IO.File.CreateText("C:Datamarket.txt")
With oMarketsReq
[Code]...
I have thios code that will load a php file (text file) into a sting via streamreader then its supposed to find and replace a portion of the text and write the changes back out to the file via streamwriter. I put my code together and after running it look at the file and it's unchanged. After looking closer it appears the problem is the find & replace operation I am doing on the string. Here is my code:
[Code]...
Write a program that requests a color as input in a text box and then determines whether or not the color is in the text file. The program should use the Boolean-valued Function procedure IsCrayola that returns the value True if the color in the text box is a Crayola color.
*I am to use a file named Colors.txt
This is my first post in the community. I am putting together a program that serves two functions:1. Takes input from TextBoxes and writes it to a text file.2. Takes the text from the text file and displays two specific strings of text in a MessageBox.This is the code for the button that writes the input to file.
Private Sub facSubmitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles facSubmitButton.Click
Dim facultyRecord As String = "C:\Documents and Settings\All Users\Desktop\teeny.txt"
[code].....
i have a text file containing following data(it is a config file for another program):
[pos]
100
[lastsave]
[code].....
I am writing a typing game in VB:E 2010 for school and I am trying to write the results of these games to a .txt file.[code]
View 10 RepliesWhen using .write method the string will be stored at the end of the text file. Is there a method that adds them on top? If not, how can I get this done without using too much memory and processor time?
View 5 RepliesI have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?
View 1 RepliesI am creating a text file using a save file dialog and copying the path to the text box which file is used to write from vb.net. when i try to write i get an error "The process cannot access the file '....fileName.txt' because it is being used by other program".
The code is below
Public Sub writeInTextFile()
Try
Dim oWrite As New StreamWriter(TxtOutputPath.Text)
[Code].....
I am attempting to gather a group of file names from a directory. I am able to do this. I tested the code by having the list populate into a listbox and all desired items were added to the list.
Here is my code:
Dim di As New IO.DirectoryInfo(strPath)
Dim dir1 As IO.FileInfo() = di.GetFiles("*.txt")
Dim dFiles As IO.FileInfo
ListBox.Items.Add(dFiles)
However, a listbox is not my desired output. I am attempting to write these file names to a text file for purposes of then parsing the information to a datatable to compare with another datatable. How to get my filenames written to a textfile.
I am writing an application that must generate a plain Text file with fixed sized columns.my current code is:
Dim MyFilePath As String = Path & FILE_PREFIX & FileNr & ".TXT"
IO.File.Delete(MyFilePath)
Dim FileStr As New IO.StreamWriter(MyFilePath, False, <ENCODER HERE>)
[code].....
I want to write a line into a text /.cfg file. the line is = name "ishtiak", i need a space between name & "ishtiak". the text "ishtiak" is loading from a textbox called textbox1. i don't want in the text box my name like this "ishtiak" it will be without "" like this ishtiak but in the text file it will add "" before & after my name.
so the question is: 1.how to add space between name & "ishtiak"? like this = name "ishtiak". 2.My textbox text will be ishtiak,but it will be written like this "ishtiak" [Code]
We have some information that we need to write (about 18KB) to a .txt file stored in one of our network drives. The file is re-written about once every 15 minutes but is read practically at least every second. We are currently using StreamWriter to write file.The file server is in remote location and the round trip ping varies from <1ms to 15ms.
The problem is, sometimes it takes as long as 6 seconds to write the contents to the file, which is definitely way too long even after we take consideration of the network speed. therefore, I am just wondering if there is any efficient way to write the file using VB.Net to improve the performance? Java has a very good tool named BufferedOutputStream, which unfortunately is not available in VB.Net (or I just have not found it).
Application log file have been created to monitor the process and following code has been used to write the log information into text file. For the first time there is no error encountered when the application runs for hours, may be 3 hours i am getting following error "An unhandled exception of type 'System.StackOverflowException' occurred in mscorlib.dll" [code]...
View 10 Replies