I'm using Systray for MDIform. The problem that I'm facing is MDIForm_MouseMove event sometimes doesn't get fired and therefore application gets stuck. After several click then all of a sudden it works for few clicks and then again get stuck.
View 1 RepliesI migrate a project from vb6 to vb.net.In vb.net project form's events are fired randamly. I mean form_Activated event are fired first after that form_Load event are fire. and this events are fired more than one time.what condition form_Activated event fired before form_Load event.
View 2 Repliesproblem with no event fired after the wrapped ocx object with aximp sent out the message in a console application testing.
View 3 RepliesI have VC++ windows service running on a windows 2008 server which invokes a VB.NET exe with certain comandline parameters using CreateProcess(). VB.NET application has a form wich uses WithEvents to handle certain event. These event handlers are set in the Forms Load event. Problem here is when i debug the VB.NET application individually the application works fine, Forms Load event is getting fired. But when the exe is invoked via the windows service the form Load event does not get fired. Note the Forms Show function called and not showdialogue.
Why this was done i am not sure it was a VB 6.0 code which i have converted to VB.NET. But everything works fine when i debug the application individually on windows 2008 64 bit.
I have a datagridview that completely updates anytime changes are made to it. It is not connected to a source but rather the datagrid is filled when first launched.
View 1 Replies[VS 2010 Beta with .Net Framework 3.5]I've written a C# component to asynchronously monitor a socket and raise events when data is received. I set the VB form to show message boxes when the event is raised. What I've noticed is that when the component raises the event synchronously, the message box blocks the component code and locks the form until the user closes the message. When it's raised asynchronously, it neither blocks the code, nor locks the form.
What I want is a way to raise an event in such a way that it does not block the code, but is called on the same thread as the form (so that it locks the form until the user selects an option.)
[Code]...
I have the following code in the code behind of an ASP.Net Page
Protected Sub ReprintDlgbutton_Click(ByVal sender As Object, ByVal e As EventArgs) Handles ReprintDlgbutton.Click
Dim queue As PrintQueue
[Code].....
I am developing application which will read credit card no without generating keystrokes for same in POS for .net. I can enable device but when I swipe a card MSR_Dataevent is not firing. EDIT: I have done below code:
[Code]...
I'm creating a dynamic gridview in vb.net using a connected sql database. Everything works fine except 1 thing: when i click the update command, the event just won't fire no matter what I do. the gridview goes into edit mode and the cancel button works fine. This has cost me over 2 days of googling but none of the solutions work. I used breakpoints to check if the code was executed, but it wasn't. If anybody has any experience in this:I believe the problem lies in the addhandler but it doesn't give any errors.I forgot to mention that the sql command was a test and sets the data in that field to 15, now it's 10, it works when i use a normal button or a static gridview.
Public Class WebForm1
Inherits System.Web.UI.Page
Dim rowscount As Integer = 2
[code]....
I found this code on another thread that fires an event when new email is received. Is there an event that I can add when an email is sent? How can i find how to call this one? Tried searching and can't find it.
[Code]...
I am back with a problem again I have a grid and I am trying to implement sort for it.Basically I have binded the data manually to the grid now my problem is I do not know the code to be written for the sorting event:( some how managed to get the code for the page indexing :-/,...doesnot have much idea!! could you !!"experts" help me out by giving me some hint or sample code in VB.Net:icon_exclaim: unable go ahead further:
View 1 Repliescreated a control inheriting a textbox. it is used to format a datetime data. i created a custom property DateTimeFormatMask which is "MM/dd/yyyy" by default. problem i'm having is that when datatable is filled by adapter and the textbox is populated with the data, it is not formatted..i placed the codes that formats the data in the Validating Event which doesn't seem to be triggered at this point.below is my code on my
View 4 RepliesI'm having an issue where my main form isn't updating even though I see the event fire off. Let me explain the situation and share some of my code which I'm sure will be horrible since I'm an amateur. I created a class to take in the settings for running a process in the background. I add some custom events in that class so I could use that in my form instead of a timer.
[Code]...
When the user clicks a cell in a new row (the row headed by the *) I am populating a column with an integer that is incremented in the "DefaultValuesNeeded" event. However, when the user clicks off the row (having done nothing to the row), what event gets fired? I need to decrement my counter but can't locate an appropriate place to do it.
View 4 RepliesI have a project which has a couple of tabs on form, an usercontrol is on the 2nd tab, when the form loads, i want the load event method of the usercontrol to fire, and the message box should pop up.Please see the attach file, the message box only pop up after the form is loaded and the 2nd tab is clicked, not when just the parent form is loaded.
View 5 Repliesi want to execute a command if the KeyDown-event occurs. This command should only be fired if the Enter-Key was pressed.
View 2 RepliesBack in the VB6 days, I could count on frmWhatever_Resize() to be fired when a form is loaded. That doesn't still seem to be the case. Since my resize event is filled with all the code I want that adjusts the size and placement of things, I decided to just call it from the end of the form's load event. That has no affect. I'm guessing that the form isn't actually shown until form_load is finished?
is there some other event that is fired when a form is shown, so I can call my resize code there?
I am writing a program to access the remote file data using FTP on button click event. Set breakpoint in the fist line of button click event. That program is using windows application vb.net 2008. If I run the application, when I click the button, it does not fire a click event of the button.
Here's my code:
Dim reqFTP As FtpWebRequest
Dim filepath As String
Dim filename As String
Dim filename1 As String
Dim ftpserverip As String
[Code] .....
During run time when I click the button the control not entered to an click event.
I have menu item, in which I have specified ShortCutKeys as "Del". On click of menu item I have called specific method. I have one form on which one textbox is placed. When I hit the "Del" key the same method which gets called on menu item click is fired. I want the default behaviour to be followed by the textbox. how to suppress the event to be fired and to achive the default behaviour of the textbox or other controls present on the form.
View 2 RepliesI have a class that is stored after serialization and compression.Is there any event built in the class that is fired automatically when a class is deserialized and ready to be used??
View 1 RepliesI know that there is usually a DoDragDrop method that starts a drag and drop operation. And that there are events (such as DragEnter, DragOver, DragDrop, DragLeave) that can be handled on the target side.
Are there any events on the source of the dragdrop that will tell me whether the dragdrop operation was completed, or possibly cancelled?
Is there a way to find out if the "TextChanged" event is fired because the user is typing into a textbox or the programmer called myTextBox.Text = "something"? I don't want to react when the user is typing each letter into the textbox so I am using the "Validated" event to catch when the user is done so I can react. The problem is I don't have a way to catch when the programmer does "myTextbox.Text = "something". The only way I know to catch changes there is to use TextChanged but then I don't want to be reacting when the user is typing each letter into the textbox.
View 4 RepliesI want to raise an event for an opto-input state change but not sure if I can. Basically I have 4 opto-inputs on a PCI control card - one of which changes pretty rapidly - that I currently poll with a timer. I'm looking at getting a proper hardware counter for that but the other 3 are production status indicators. I'd prefer it if they alerted the app to a state change though.
Depending on the state of one of the inputs I have to fire a relay which simulates a button push. Having been playing with serial ports and getting a very useful app built for logging production data into a SQL Server DB I want to re-visit a proof-of-concept system I built a few months ago.
Current code - which works fine - but I'd like to change is like this:
Private Sub tmrOptoInput_0_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles tmrOptoInput_0.Tick
'Read OptoInput_1 to Monitor Track State...
Dim aType As Byte ' replace Byte with any other type
[code].....
Having 4 inputs so I need 4 timers, plus another one that polls the database and checks a status flag which triggers the app to start logging. I'd like it to be event driven rather than timer driven if at all possible but I don't know how and there's nothing in the control card docs. Also I can't seem to find anything relevant on the web.
I try to figure out how I can launch an executable, a little software that have a window and that doesn't have the option to be minimized into the systray. I know how to start a process, how to minimize the current application into the system tray. But I can't find any example how to do it to a process.
There is a way to start a process, hide his window and make it appear with his icon (or a new defined one) into the systray and when we double click it his widow appear and when we minimize it it return to the systray ? For that part I think I will have to capture the process, subclass it to redefined his minimize action, I am right ?
How to Change BackColor in mdiForm(vb.net 2008)?
View 2 RepliesI want to remove MDIForm without border .You can move the MDIForm with click its border,however when u select the border as none, u will not be able to move the MDIForm.
View 3 RepliesI have added the AutoPostBack = "true" attribute to the drop down list. It doesn't work.
<asp:DropDownList CssClass="dropDownList" ID="ddlBusinessUnit"
AutoPostBack="true" runat="server" Width="250px"
OnSelectedIndexChanged="ddlBusinessUnit_SelectedIndexChanged">
[Code].....
How can I ensure that the event method is called?
I have a class library in which i have created a simple new application with a form and added AX webbrowser control on it. In order to apply events on popup of webapplication shown in webbrowser (or to detect whether a pop-up has opend), i am using LostFocus event on webbrowser control, it was working fine till now.But after i reset my IE settings (Internet options->Advance->Reset) the event stopped working. I am using IE9 and the class library is developed in VB.NET (VS 2010).
View 9 RepliesHas anyone got any ideas on how to display a numeric value in the systray? The only method I can think of is to create an image for each number and change it as required.
View 1 RepliesIs there any short way to autosize MdiChild Forms according to MdiForm.
View 3 Replies