I have a tab control in one of my form that currently has five tab on it. They are all left justified now. I would like to have the first four left justified and the fifth on the right of the tab control so that there is a gap between the forth and fifth tab.Is that possible?
View 4 RepliesI have an unbounded datagridview with 5 columns. Is there a way of setting the alignment of the header for column 3 only to centerMiddle, while the alignment of the others columns to remain as the default? I have been successful as setting the alignment of each columns, but I could not figure out for the column headers.
View 4 RepliesI am using the drawstring method to print my labels and textboxes.Some of the labels are centered or left justified and some of the textboxes are centered or left justified.I was just going to code each of the text boxes and labels seeing as I couldn't just tell all the labels or textboxes to align one way or the other.
View 5 RepliesHow to change the alignments in DataGrid in Visual Basic.net 2003 because all the columns are aligned left default. Also is there anyway to change numeric column to show with 2 decimal numbers (eg: 51.2 -> 51.20)
View 1 RepliesI have a form containing two panels. In both panels there are two labels and textboxes. I set the 'Center In Form' property of the labels and textboxes to 'Horizontally' and 'Vertically' in design time respectively. But as the form is resizable, when the size of the form is increased or decreased at runtime the controls are no longer center aligned in the panels. How can I handle this problem (provided the main form needs to remain sizable)?
View 2 RepliesI have a form containing two panels. In both panels there are two labels and textboxes. I set the 'Center In Form' property of the labels and textboxes to 'Horizontally' and 'Vertically' in design time respectively. But as the form is resizable, when the size of the form is increased or decreased at runtime the controls are no longer center aligned in the panels. How can I handle this problem (provided th
View 3 RepliesI am trying to use the Web Browser control in my vb .net user control. I am using VS 2008. Finally, I will be calling my assembly (.dll) from a web page. I wanted to display the usercontrol with the web browser control inside this web page. The problem is I cannot proceed since the Web browser control cannot be called from a partially trusted assembly. Using VS 2008 I have created a strong name for my class, also added the <Assembly: AllowPartiallyTrustedCallers()> to the AssemblyInfo. But still the web browser control cannot be seen in my web page. Do you how I can make my assembly fully trusted so that it can access web browser control? If you have used web browser control, can you confirm if this step is really required?!
View 2 RepliesI am wondering if anyone has any idea how to make the controls stack and fill up the available space left by a control if the control is hidden or removed from the UltraGridBagLayoutPanel.
Example:
[Textbox 1]
[Textbox 2]
[Textbox 3]
[Textbox 4]
[Textbox 5]
If I hide [Textbox 3] as of now, it will disperse the space left equally and pad the remaining text boxes with the space. However, I would like it to do this...
[Textbox 1]
[Textbox 2]
[Textbox 4]
[Textbox 5]
Where all the text boxes will move up and [Textbox 4] will completely consume the space left by [Textbox 3].
I'm trying to make a label control transparent over a Panel control.However by setting the background colour of the label to Transparent, it actually sees right through to the form itself, not the panel as intended.
As an example we use a panel with a background as white, we make the label transparent, however it gets the form�s colour as blue.However, we are using a custom panel control and need the label to be transparent over the panel and not see the forms background.
1) How can I make the text in RTB control to change without clicking on it (RTB control) again? I notice that the event handler is mousedown so its only occurs whenever the users clicks on the controls. But I really have no idea how to do that. Anyone can guide me how to do that???
2) How to make the RTB's Back Color to transparent??? Cause it is not supported. Or is it I use the wrong control???
[Code]...
I'm trying to make a label control transparent over a Panel control. However by setting the background colour of the label to Transparent, it actually sees right through to the form itself, not the panel as intended.
As an example we use a panel with a background as white, we make the label transparent, however it gets the forms colour as blue. However, we are using a custom panel control and need the label to be transparent over the panel and not see the forms background. Is this possible?
I'm trying to make a label control transparent over a Panel control. However by setting the background colour of the label to Transparent, it actually sees right through to the form itself, not the panel as intended.
As an example we use a panel with a background as white, we make the label transparent, however it gets the forms colour as blue. However, we are using a custom panel control and need the label to be transparent over the panel and not see the forms background.
I made a tool strip menu item in one form and I want it to 'click' a button in another form automatically.
This is the code of the tool strip menu item in
Private Sub PasteTabToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PasteTabToolStripMenuItem.Click
MDIParent1.Button1 'Don't know what to put here
End Sub
I am trying to make a listview custom control based on the standard listview control that will allow me to drag a column header outside the standard listview control and drop it on a panel. I plan to use the drop event to determine which column I should group by view on.
View 2 RepliesHow to make your own control in vb.net?
View 3 RepliesCan you control what part of the image is shown in the picturebox. ex. you only want the top left 100x100 pix shown of a 1000x1000 pix image?
View 4 RepliesHow can I set theback colorof a Disabled TextBox.
View 11 RepliesI have 4 different panels, which I want to appear in the SAME spot on the form at different times. Currently, I've just got all four stacked on top of each other in the designer, and I'm toggling their visible properties to show each. This is becoming extremely difficult though, as now I have different buttons in each panel, and the panels keep getting accidentally put inside each other when I move them.
View 7 RepliesIm working on a project and just wanted to know to make a control refer to itself?I know that by using the word "Me", the system refers to the form but how about the control. I know that i can simply name the control (e.g. txtSurname.Clear) but if i was to use the code on multiple controls it would save alot of time if the control could simply refer to itself!
View 7 RepliesI want to make a url control program. url list in the listbox and search button
if vocabulary in the url then listbox 2 add item
example:
url: http://example.com
vocabulary : "car"
search: The car vocabulary in the documenttext ("source code") add listbox1 to listbox2
but I don't want slowly.I see same program very fast.What I am doing?
I have wanted to ask my problem.I make 3 buttons, button 1, 2 and 3. so when I click one button automatic button changes color. I'm using code like this
For Each ctrl As Control In frm.Controls
If ctrl = button Then
ctrl.backcolor = color.red
[code]....
My HScrollbar will only go to 9 less than the specified Maximum value. I want it to go from 0 to255. When I set the Maximum value to 255 and run the program the slider indicates 246 when full right. I can get it to go to 255 by setting the Maximum value to 264 but this seems very wrong.
View 2 RepliesI did some research on how to make transparent User Control, The suggested code was like this:
Private Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
Me.SetStyle(ControlStyles.SupportsTransparentBackColor, True)
Me.BackColor = Color.Transparent
UpdateStyles()
End Sub
When I build the project, there is no errors. But, When I try to load my user control using the "Choose ToolBox Items" dialog, it gives me the following error message:
"There is no components in [dll path] that can be placed on the toolbox."
way to "reset" a tooltip, so you don't have to leave and re-enter a control to make it pop? I have a form that is pretty much entirely taken up by one control. I want to have its ToolTip text change based on which region of the control is being hovered over (which I can do now). I just have to leave the control and re-enter it to make it pop. I'd like to have the Tooltip pop, then if I move the mouse to a different location (still inside the control's bounds) have it pop-able again in the new spot.
View 5 RepliesHow to make a control array for buttons in VB.Net? like in VB6..
is it possible that the syntax can be like this?
dim a as button
for each a as button in myForm
a.text = "hello"
next
how to make a control array of my control?
ex:
Button1(0)
Button1(1)
Button1(2)
...........
in vb6 i have no problem on doing this.. but in vbnet i don't know.
I want to Make A control Panel Extensions I'm using VS2005.net Windows Xp professional Edition
View 6 RepliesIs there a way to not put the project name in the Inherits attribute?
I am working with vb and I have multiple projects, that have multiple web pages. In each of these projects I create controls that are reused in the web pages.
Each control I have is declared like this:
<%@ Control Language="vb" AutoEventWireup="false" CodeBehind="MenuBarControl.ascx.vb" Inherits="**projectName**.MenuBarControl" TargetSchema="http://schemas.microsoft.com/intellisense/ie5" %>
When I want to copy the control into another project I have to change the **projectName**. Having to change the project name for each project makes the code not reusable. Changes made to specific projects each time is not reusable.
I want to be able to omit the project name in the Inherits attribute. When I do that now I get an error
Parser Error
Parser Error Message: Could not load type 'MenuBarControl'.
How can I get a control to slide into view onto my form? It could be a button, panel anything. I just want it to look like it slides in from one of the sides.
View 1 Replieshave a page with many links.
when any link is clicked, the page corresponding to that hyperlink should open within a specified area on the same page, that is the "div content" yes i can use iframe but can i make a div target of the hyperlink?
please no jscript only html and asp.net