I have a tabcontrol on my form, but I created the tabpages in the wrong order. I tried dragging and dropping the tabpages but that didn't work. How do I rearrange my tabpages?
View 1 RepliesI have a form with a tabcontrol and several tabpages.
View 1 RepliesOne of my friends has suggested that in my program i give users the ability to, when holding the Alt key,rearrange tabs in a TabControl when dragging the mouse. But im stumped as to how to do this.
View 1 RepliesMy UI currently addsabPageGraphs to a TabControlMain dynamically. I now need to present 4 different views of the same data. I want to do something like the following code indicatesbut there is no 'Add()' method for TabPages by which I can add 4 Tabs to an existing TabPage.How would I accomplish this so that under a specific dynamically added TabPage, the User can select any of 4 new TabPages with a different graph to view.
if (!this.tabControlMain.Contains(this.tabPageGraphs))
{
this.tabControlMain.TabPages.Add(this.tabPageGraphs);
[code]....
I'm new to programming and I'm trying to find a way to move tabs in a tabcontrol. I've found this good resource (url...), but I don't know how to implement it.
View 5 Replieshow to add a click event to the tabpages of a tabcontrol? I tried double clicking it but nothing happened. I tried putting a button on the tabpage but that did not work either.
View 3 RepliesI am trying to show or hide tabpages as per user choice. If user selects gender male then form for male in a tabpage "male" should be displayed and if user selects female then similar next form should be displayed in next tab "female"I tried using
tabControl1.TabPages.Remove(...)
and
tabControl1.TabPages.Add(...)
It adds and removes the tabpages but doing so will loose my controls on tabpages too... i can't see them back. what's the problem here?
Ok what I am working is creating a tabpage at run time, I ahve a class that inherits tabpage class and when I call, it creates a new tabpage and add it to the tabControl, My codes are as:
Class CreatenewTab : Inherits System.Windows.Forms.TabPage
'Some implementation here
end Class
[code]....
How to make a new created tab to be selected and top? I have tried .show(), .Select() and .Focus() but nothing happens. What I mean is when you click on add new Tab, like in Browser a new tab is created and is selected for use(become top)
I was using System.Windows.Forms.TabControl to list custom pages, but there seems be a Hardcoded Padding of 3 pixels on all sides of Tabcontrol. How I can remove that. One point here is I dont want to remove Tabs on Top http:[url].....I found above MSDN link whick does removes margins from all sides including TabItems on top which I dont want.
View 1 RepliesI am a newbie in development. I have a window application in vb.net in VS 2003 there is a tabcontrol which has three tab pages. I want that user was not able to change tabpages by clicking tabcontrol rather than it is done by clicking button on tabpages how it is possible?
View 7 RepliesNow my idea was to have a tablelayoutpanel with labels in it,Functionally my TabControl allows the user to sequentially select various components used for designing a machine, My idea was to provide him an overview of his previously selected components at every tab.
View 2 Replieshow to set header color for tabpages in WINFORMS. and also the back color.
In my code. For j = 0 To dataset4Category(i).Tables.Count - 1
Dim Finder As Integer = Decimal.Floor(((dataset4Category(i).Tables(0).Rows.Count) / 30))
key = dataset4Category(i).DataSetName
name = Space(1) & StrConv(dataset4Category(i).Tables(0).TableName, VbStrConv.ProperCase) & Space(4)
myTabControl.TabPages.Add(key, name)
myTabControl.TabPages(j).Tag = 0
[Code]...
r red icons displayed next to controls that are not valid, those controls are usually textbox, combobox..etc.What I need is to display that same kind of error red icon next to tabpages headers in a tabcontrol.I mean, whenever i do some sort of validation logic in one of the tabPages, if my logic returns false, then I want to be able to display the error red icon next to the header of that Tabpage that's not valid.
View 2 RepliesI need to fill in the properties of the boarderstyle in combobox so User can change his boarder style as he wish in other words when user open combobox it shows -BorderStyle.Fixed3D-BorderStyle.FixedSingle-BorderStyle.None and when he choose the style it performed at the runtime
View 5 RepliesWhen you INHERIT from TabControl to create a different version of the TabControl, then BUILD the designer will add 2 TabPagesby default when you add your new TabControl from the ToolBox to a Form.
View 1 RepliesI have 2 questions.
1- Let's I have a form with a TabControle and 2 tabpages, is it possible to set the tabpages so that if i go from tabpage1 to tabpage2 that all data on tabpage1 gets reseted. The same thing if I go from tabpage2 to tabpage1 that tabpage2 is reseted. Also if I press on tabpage1 or 2 that the form changes to a certain height.
2- On the same form I created a button to open a new form. This new form is a notepad look a like. What I want is that the moment I open the second form that al the input from form one is showed on form 2. So that I can save it or print it.
I have a Tab Control on a form that contains several TabPages. I want to be able to disable certain ones at runtime and then enable them programmatically. What is the best way to do this?
View 2 RepliesI can't make a button there can print my form on that tabpages
View 12 RepliesI have a Windows form application with a MenuStrip at the top (File, etc...) and a TabControl directly beneath it with 8 TabPages arranged horizontally. The tabpages vary in height. The form's autoscroll property is set to True to allow the user to scroll down for those tabpages that contain more content. This all works fine.
What happens at runtime, though, is that when the user clicks on some of the tabpages that are greater in height, the scroll bar automatically scrolls down slightly, which obscures the menustrip at the top of the form. This behavior is undesirable. on how to modify it? I have compared the properties of the form itself, the tabpages, and included controls (table layout panels, etc.) but cannot figure out what distinguishes the tabpages that "jump" down when clicked upon from those that do not. I suspect that there may be a property that eludes me.
Second, I have added a ContextMenuStrip to the form to enable actions upon right-clicking within each tabpage. Even though I have assigned it to the Windows form and each tabpage, it does not appear at runtime. One can right-click all over the place within the application, but it never appears.
I have a string like this:
1a2b3c4d5e6f7g8h
And I need to rearrange it as follow:
a1b2c3d4e5f6g7h8
Do you understand what I mean? For each two characters, the numerical character swapping place with the following letter, i.e. from 1a change it to a1.how to rearrange the numerical characters and letters in the string? My string always has the said pattern, i.e. one integer then followed by a letter then followed by a integer then followed by a letter and so on.
How do I rearrange the Settings variables in VB.Net 2010 to be near the ones they are related to? I edited the app.config file to rearrange them, but when VB loaded again they were still shown in the old order.
View 2 RepliesI use this code to rearrange idd column after deleting one row from tab 1 "select row_number() over(order by idd) as idd, id,name,dat from tab1"
now how to save changes to sql db after deleting sevral rows and rearranging idd column?
How do I rearrange the Settings in VB.Net 2010 to be near the ones they are related to?I edited the app.config file to rearrange them, but when VB loaded again they were still shown in the old order.
View 4 RepliesHow do I allow users to drag/drop or rearrange tabs, like in mozilla and IE?I've managed to extend the tabcontrol properties a little but i cant get the dodragdrop method to work....
View 10 Repliesi hav a tabpage on a form n on its click event i want to call the tabpage of another form (like frmcut.tabcontrl.tabpage1). But i dont know how to do it?
View 4 RepliesVb.net I tried to rearrange the DGV Rwos but I don't know how to complete it. as it show in the code ( my request in green line)
vb
Public Sub rearrange()
For Each row As DataGridViewRow In Form1.DataGridView1.Rows
If Not row.Cells(1).Value Is Nothing Then
[code]....
I have several windows open: VB, IE, Explorer... If I happen to close one accidentally, or on purpose, and reopen it, the buttons on the task bar are all messed up. I get used to them one way and I am constantly switching between the windows.Here is my question: Would I be able, in VB, to 'hook' the taskbar and be able to rearrange the buttons?I have no idea what to search for in Google. I happened upon a program once a while back, A REAL LIFE SAVER!. I could just click and drag the buttons using that one.
View 5 RepliesProblem: My datagridview is moving from a tabcontrol onto the main form when I execute the below code. I desire it to stay in the original position. Details:
1) I created a MAIN datagridview1 for my master on tab 2 (OK) - this is for editing, deleting etc.
2) I created datagridview3 on tab 1 for implementing 2 textbox filters (OK)
3) The actual filter code fires on changing of values in two text boxes
The above works perfect except when the code below is executed, datagridview3 moves from tab1 of my tabcontrol to my main form. How do I keep it from moving (desired) or at the least move it back to control tab 1?
[Code]...
I have a parent form and a child form. parent form has a tabcontrol
now i want to fill whole child form to tabpage1.
Am new here and also a beginner in VB. I have created a form with a TabControl and when I click the tab page it creates another TabControl Dynamically. This works fine.I would like to save the form with the newly created TabControl and when I close the form and reload it the new TabControl should still be there.
Public Class Form1
Inherits System.Windows.Forms.Form
Private Sub Form1_Load(ByVal sender As System.Object,
[code]....