Form With A Tabcontrol And Several Tabpages?
Aug 22, 2009I have a form with a tabcontrol and several tabpages.
View 1 Replies
ADVERTISEMENT
TabControl - How To Rearrange TabPages On Form
Jan 11, 2010I have a tabcontrol on my form, but I created the tabpages in the wrong order. I tried dragging and dropping the tabpages but that didn't work. How do I rearrange my tabpages?
View 1 RepliesAdd A TabControl With 4 TabPages To A Tab Page?
Sep 21, 2010My UI currently addsabPageGraphs to a TabControlMain dynamically. I now need to present 4 different views of the same data. I want to do something like the following code indicatesbut there is no 'Add()' method for TabPages by which I can add 4 Tabs to an existing TabPage.How would I accomplish this so that under a specific dynamically added TabPage, the User can select any of 4 new TabPages with a different graph to view.
if (!this.tabControlMain.Contains(this.tabPageGraphs))
{
this.tabControlMain.TabPages.Add(this.tabPageGraphs);
[code]....
Reorde TabPages In A TabControl?
Jun 6, 2012I'm new to programming and I'm trying to find a way to move tabs in a tabcontrol. I've found this good resource (url...), but I don't know how to implement it.
View 5 RepliesAdd A Click Event To The Tabpages Of A Tabcontrol?
Mar 17, 2009how to add a click event to the tabpages of a tabcontrol? I tried double clicking it but nothing happened. I tried putting a button on the tabpage but that did not work either.
View 3 RepliesHiding And Showing TabPages In TabControl?
Jul 29, 2010I am trying to show or hide tabpages as per user choice. If user selects gender male then form for male in a tabpage "male" should be displayed and if user selects female then similar next form should be displayed in next tab "female"I tried using
tabControl1.TabPages.Remove(...)
and
tabControl1.TabPages.Add(...)
It adds and removes the tabpages but doing so will loose my controls on tabpages too... i can't see them back. what's the problem here?
Adding A Close Button In A TabControl TabPages?
Jun 10, 2011Ok what I am working is creating a tabpage at run time, I ahve a class that inherits tabpage class and when I call, it creates a new tabpage and add it to the tabControl, My codes are as:
Class CreatenewTab : Inherits System.Windows.Forms.TabPage
'Some implementation here
end Class
[code]....
How to make a new created tab to be selected and top? I have tried .show(), .Select() and .Focus() but nothing happens. What I mean is when you click on add new Tab, like in Browser a new tab is created and is selected for use(become top)
C# - Remove/Edit TabControl Padding For TabPages?
Jul 15, 2011I was using System.Windows.Forms.TabControl to list custom pages, but there seems be a Hardcoded Padding of 3 pixels on all sides of Tabcontrol. How I can remove that. One point here is I dont want to remove Tabs on Top http:[url].....I found above MSDN link whick does removes margins from all sides including TabItems on top which I dont want.
View 1 RepliesDisable Change TabPages From Clicking TabControl
Jan 15, 2009I am a newbie in development. I have a window application in vb.net in VS 2003 there is a tabcontrol which has three tab pages. I want that user was not able to change tabpages by clicking tabcontrol rather than it is done by clicking button on tabpages how it is possible?
View 7 RepliesMake A 'Global Panel' On TabPages Of A TabControl?
Nov 6, 2009Now my idea was to have a tablelayoutpanel with labels in it,Functionally my TabControl allows the user to sequentially select various components used for designing a machine, My idea was to provide him an overview of his previously selected components at every tab.
View 2 RepliesC# - Setting Header Color For Tabcontrol.Tabpages In Winforms?
Sep 23, 2010how to set header color for tabpages in WINFORMS. and also the back color.
In my code. For j = 0 To dataset4Category(i).Tables.Count - 1
Dim Finder As Integer = Decimal.Floor(((dataset4Category(i).Tables(0).Rows.Count) / 30))
key = dataset4Category(i).DataSetName
name = Space(1) & StrConv(dataset4Category(i).Tables(0).TableName, VbStrConv.ProperCase) & Space(4)
myTabControl.TabPages.Add(key, name)
myTabControl.TabPages(j).Tag = 0
[Code]...
Displaying The Red Error Icons Next To The Headers Of Tabpages Within TabControl?
Jul 15, 2009r red icons displayed next to controls that are not valid, those controls are usually textbox, combobox..etc.What I need is to display that same kind of error red icon next to tabpages headers in a tabcontrol.I mean, whenever i do some sort of validation logic in one of the tabPages, if my logic returns false, then I want to be able to display the error red icon next to the header of that Tabpage that's not valid.
View 2 RepliesFill Combobox With Properties Of BorderStyle Of Tabpages Of The Control Tabcontrol?
Oct 12, 2009I need to fill in the properties of the boarderstyle in combobox so User can change his boarder style as he wish in other words when user open combobox it shows -BorderStyle.Fixed3D-BorderStyle.FixedSingle-BorderStyle.None and when he choose the style it performed at the runtime
View 5 RepliesCreate A Custom TabControl That Does Not Add 2 Default "TabPages" In DESIGN MODE?
Jul 20, 2011When you INHERIT from TabControl to create a different version of the TabControl, then BUILD the designer will add 2 TabPagesby default when you add your new TabControl from the ToolBox to a Form.
View 1 RepliesTabControl - Set Tabpages - Go From Tabpage1 To Tabpage2 That All Data On Tabpage1 Gets Reseted
Jun 11, 2009I have 2 questions.
1- Let's I have a form with a TabControle and 2 tabpages, is it possible to set the tabpages so that if i go from tabpage1 to tabpage2 that all data on tabpage1 gets reseted. The same thing if I go from tabpage2 to tabpage1 that tabpage2 is reseted. Also if I press on tabpage1 or 2 that the form changes to a certain height.
2- On the same form I created a button to open a new form. This new form is a notepad look a like. What I want is that the moment I open the second form that al the input from form one is showed on form 2. So that I can save it or print it.
Control On A Form That Contains Several TabPages?
May 21, 2012I have a Tab Control on a form that contains several TabPages. I want to be able to disable certain ones at runtime and then enable them programmatically. What is the best way to do this?
View 2 RepliesCan't Make A Button To Print My Form On That Tabpages
Mar 28, 2010I can't make a button there can print my form on that tabpages
View 12 RepliesScroll Bar Shifts Around With Clicks On Tabpages In Windows Form?
Jul 22, 2011I have a Windows form application with a MenuStrip at the top (File, etc...) and a TabControl directly beneath it with 8 TabPages arranged horizontally. The tabpages vary in height. The form's autoscroll property is set to True to allow the user to scroll down for those tabpages that contain more content. This all works fine.
What happens at runtime, though, is that when the user clicks on some of the tabpages that are greater in height, the scroll bar automatically scrolls down slightly, which obscures the menustrip at the top of the form. This behavior is undesirable. on how to modify it? I have compared the properties of the form itself, the tabpages, and included controls (table layout panels, etc.) but cannot figure out what distinguishes the tabpages that "jump" down when clicked upon from those that do not. I suspect that there may be a property that eludes me.
Second, I have added a ContextMenuStrip to the form to enable actions upon right-clicking within each tabpage. Even though I have assigned it to the Windows form and each tabpage, it does not appear at runtime. One can right-click all over the place within the application, but it never appears.
TabControl In .net - Call The Tabpage Of Another Form
Mar 11, 2010i hav a tabpage on a form n on its click event i want to call the tabpage of another form (like frmcut.tabcontrl.tabpage1). But i dont know how to do it?
View 4 RepliesDatagridview Is Moving From A Tabcontrol Onto The Main Form
Sep 18, 2010Problem: My datagridview is moving from a tabcontrol onto the main form when I execute the below code. I desire it to stay in the original position. Details:
1) I created a MAIN datagridview1 for my master on tab 2 (OK) - this is for editing, deleting etc.
2) I created datagridview3 on tab 1 for implementing 2 textbox filters (OK)
3) The actual filter code fires on changing of values in two text boxes
The above works perfect except when the code below is executed, datagridview3 moves from tab1 of my tabcontrol to my main form. How do I keep it from moving (desired) or at the least move it back to control tab 1?
[Code]...
Fill MDI Child Form To Tabcontrol Of MDI Parent?
Jun 26, 2009I have a parent form and a child form. parent form has a tabcontrol
now i want to fill whole child form to tabpage1.
Forms :: Saving TabControl To A Form At Runtime?
Nov 27, 2011Am new here and also a beginner in VB. I have created a form with a TabControl and when I click the tab page it creates another TabControl Dynamically. This works fine.I would like to save the form with the newly created TabControl and when I close the form and reload it the new TabControl should still be there.
Public Class Form1
Inherits System.Windows.Forms.Form
Private Sub Form1_Load(ByVal sender As System.Object,
[code]....
Remote Desktop Client (RDP) In Form / TabControl?
Jun 17, 2011I woudl like to use a the RDP control in my form. However, when I add the Active-X object and open the form during runtime with frm.show() the app fails.
There are several apps available who do excatly the same. How can I get this running?
TabControl With Tab Pages In Form - Refresh DataGridView
Sep 2, 2010I have a project with a form in which I have a tabcontrol with several tab pages. In each tabpage I have a datagridview and some textboxes and some comboboxes. I managed to refresh one datagridview but it stopped working. - I don't know why. Here's what I did:
Public Sub RefreshGRD()
Me.Adapter.Fill(Me.DataSet,"table")
End SUb
And I called this fnction before closing the connection for each button that adds or deletes or updates. Before calling it I cleared the dataset.
How To Have A Search Form Toolstrip Inside A Tabcontrol Page
Mar 19, 2009I am using a tabcontrol to put all my database tables as I don't want to have too many forms. I tried to set up the search form function by watching a video by Beth Messi called "Creating a search form" under form over data video series. After I finished setting up everthing accordingly, the tool strip appeared bellow the window form title bar. May I know how can I move it into the tabpage?
View 8 RepliesMake A Certain Tab Inside TabControl To Be Active At Form Event?
Mar 17, 2009How do I make a certain tab inside TabControl to be active at form event?
For example, I want TabControl2 to be shown at form load.
TabControl2.focus isn't working.
.Net Form Activate/Deactivate Event Firing Issue After Removing A TabPage From TabControl?
Nov 28, 2011I've recently run into an unexplainable issue regarding a windows form application I am working on. I've managed to isolate the issue to a single line of code whereby a single TabPage is removed from a TabControl, leaving no tabs left in the TabControl's collection. What happens next is a bit mystifying: my application proceeds to enter a state in which the main form's Activate event is fired subsequently followed by its Deactivate event. As a result, no matter where I click on the form, the application will activate for a split-second then immediately deactivate itself, thereby causing me to be unable to interact with any other GUI controls on the form. I thought maybe another thread is trying to interact with the deleted tab object, but the tab is created and destroyed on the same main gui thread. Does anyone have any insight that may point me in at least a new direction? Stepping through the debugger to the point in code where the tab is removed does not cause any exception to get thrown, so at first glance there doesn't appear to be any coding issues going on (although I would not be surprised that is actually the case!).
View 3 RepliesBest Way To Only Show Tabpages Have Permission To See?
Feb 3, 2010I was thinking of a function that returns boolean and using remove at.. but maybe removing all and only adding the ones have permission too? [code]But I have 15 pages and want to loop through these.
View 2 RepliesCan't Add Tabpages From A Separate Class
Nov 22, 2009Good evening folks, I'm building a program that is threaded. While I can get the thread to work no problem, I can not seem to add pages to my tabcontrol from the class I'm using. Any idea's on what I'm doing wrong?frmMain is loaded first. Then the idea is to load the other tabpages using a separate thread as they take awhile.[code]
View 1 RepliesHide Tabpages With Radiobuttons?
Aug 2, 2009it's about a program mode, i want to hide all except one tabpages if i check the "standard"-radio button.
When i check "advanced" the tabpages should be visible again.
"standard" is radiobutton1, "advanced" is radiobutton 2