Thread.Interrupt() Doesn't Interrupt A Thread That Is In A Sleeping State?
Aug 18, 2009
Microsoft's System.io.file.exists and System.io.directory.exists can take FOREVER, especially if you're in a situation, where you've unplugged from the network and you're looking in a share.
So, to get around this, I've created a thread that times out after 3 seconds. Returning false, if the calls above haven't yet returned. To do this, my main thread passes its instance to the new thread and immediately calls:
Thread.Sleep(TimeOutInSeconds * 1000) ' Where TimeOUtInSeconds = 3
The new thread then goes and checks for the file / folder using the System.io.file.exists / System.io.directory.exists functions.
Regardless of the result, then it uses the main thread's reference to call Thread.Interrupt().
My main thread doesn't get interrupted. It stays there for the full 3 seconds. If I were to change that to 3 minutes ( and I have ), it'll sleep for 3 minutes.
A spreadsheet formatter that I made for the department opens and closes Excel spreadsheets in the backround. If someone opens Excel while the macro is running, it stalls the entire program. I need a way to sense Excel opening, then stop it, preferably with a message box saying what just happened.
I have a thread in an application which calls a sub routine Main(). The Main sub routine in turn call several sub routines/functions from with the same module,several different classes in the same application. Also some sub routines/functions call routines from a class library. Now say the routine/function in class library goes into a infinite loop and never returns. I would like my thread in the application to raise a event and display message to the users about the infinite loop. I am giving some sample code for the application.
I have a VB .Net service, which uses System.Threading instead of a timer to basically do what a timer should do. My problem is stopping the service while the thread is in its sleep state. See the code below:
Imports System.Threading
Public Class AService Private stopping As Boolean[code].....
If say 1 minutes after the service starts, it can not be stopped until its 15 minute interval ticks and the thread wakes. Is there any way to catch the signal that the service is attempting to stop, and interrupt the thread?
I have written a application that searches the users computer for all files within a specified folder.Sometimes the number of files can be quite large. I would like the user to able to interrupt (end) this process.My code is handled by a button click in a VB win form.[code]I have tried various MsgBoxes that warn the user but I think a Esc Key or a Cancel button would be better.
I'm using a long string using SAPI speech and I want to be able stop the speech rather than have to listen to it babble on throughout the whole thing. So, in one function, we'll say it's the load function, it declares a speech string: [Code] I'm trying to get it to abort reading the audio but can't seem to figure out how to get it working. I've seen examples that have used SVSFlagsAsync and SVSFPurgeBefore Speak but I can't get either to be recognized and I've added (what I believe to be) the necessary resources to the library and added the imports at the top of the page. Does anyone know how to interrupt the speech?
I have an event I want to do continuously until a button interrupt is pressed. Here's the pseudo Click button 1: Check if button 2 is pressed If not, do stuff If so, stop doing stuff End routine
So what I currently have is this: Dim randominteger As Integer = 0 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles StartSampleButton.Click [Code] ..... Unfortunately, it's never breaking outside of the first loop. How to get around it?
I am using the BeginConnect method of a socket to connect to a server which may or may not be on line I need to provide my users with a countdown timer which they can abort the attempted connection if they wish to The question is; how can I interrupt the Begin Connect method of an asyncronous connection
May i know how to fire an event using the serial port interrupt method in visual basic windows form? Currently, now i am using the polling method which is using the timer event to continuously poll the port every 1sec.
But now i would like to change to the interrupt method which will fire up the same event without using the timer event.
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0 Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Timer1.Enabled = True Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show() Label1.Show() Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept l_Users.Items.Add(SocketID) End Sub
Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50 threads = New Thread(AddressOf test) threads.IsBackground = True threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on." Source="System.Windows.Forms" StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
I am using VB.net and I am getting this error only in debugging mode.Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your Main function has STAThreadAttribute marked on it. This exception is only raised if a debugger is attached to the process.
to be able to print a list of objects in a user-defined way, i've implemented an IComparer (sortclass), which is able to sort any object by its property. I have a list that can be printed (first a pdf is generated trough the object, then passed to the printer), all done by clicking 1 button (print button).
The internal ICollection (list of) is perfectly sorted, however, the routine to create and print the objects is apparently called to soon... since not all objects are completely sorted when send to the printqueueu. A check of the list after all objects has been send to the printer proves however that the list is printed.
I'm calling a class function in a thread function. I'm using invoke method to send a value to a progressbar in the main form and I don't know how to do that in an other class function called by the thread function.
My goal is to send a value to a progressbar to the main form from the thread function and even from the function called by the thread function.
My code: ' Invoke sub Public Sub UpdPgEvent(ByVal value As Integer) Me.pgFindEvent.Value = value
I have a form that goes through an endless loop and processes data. When I click a button that "closes" the form the form keeps processing even though it is closed. I want the form to completely end and exit out of its loop statement. Then open a new form.Here is the code I am using to close the form
Why this: System.Threading.Thread.CurrentThread.Priority = System.Threading.ThreadPriority.Highest doesn't work? I ran my app and checked it using the task manager process tab. It was checked as normal.
When i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."
I'm creating a Client Server application which involves theServer running some scripts in clients and getting back results in an automated way. In Server, other than Main thread, i have 2 worker threads, a) one monitoring response from clients and b) the other scheduling next available job to respective client which executes that job. The issue here is ,I want these worker threads to write the status of their work in the UI(which comes under Main Thread). Also i need to write things in worker thread in a Data table and Rich Text Box in Main thread. But, I can't do so, since it has been blocked to access one thread's function or property directly from others. Is there any work around to do this?
Preface: I know this is an unusual/improper way to do this. I can do this with a "real" ShowDialog(), background worker/thread, and so on. I am trying to do specifically what I describe here, even if it is ugly. If this is impossible for X reason, I have created a fancy progress dialog for some of our long running operations. I need to have this dialog shown on a new thread while having processing continue on the calling (UI in most cases) thread.
I need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""
I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?
