Toggling MenuItems (ToolStripMenuItem) Checked State?
Apr 14, 2011
I have a menu bar like this.I need to use them like radio buttons. So i have come up with this. Seems a nasty hack since it loops all my menu items. And if i later add different checks it would interfear.
vb
Private Sub mnuMainMenuToolBarComposeExistingThread_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) _ Handles mnuMainMenuToolBarPrivateMessage.Click,
[code].....
View 2 Replies
ADVERTISEMENT
Apr 9, 2009
I have a context menu attached to a panel, that should mirror commands available in a toolbar menu.Currently in my MouseUp event, I set the enabled state of the MenuItems, and add them to the context menu:
ctxMnuLinks.Items.Clear()
ctxMnuLinks.Items.Add(mnuLinksOpen)
ctxMnuLinks.Items.Add(New ToolStripSeparator)
[code].....
View 1 Replies
Jul 26, 2005
I understand that Checked is a boolean, which is not the case of CheckState.I understand that CheckState also have a undeterminate possible value.But I don't understand why we have them both. I think that CheckState would be sufficient. What is the need for Checked ?
View 10 Replies
Mar 22, 2010
Let's say I have a checkbox1 control on form1. I then open form2. I want to be able to change the checked state of checkbox1 on form1 from form2.[code]...
View 5 Replies
Mar 25, 2011
On the form that i have there is a listview with checkboxes enabled it all works fine but when i close and reopen the form all the previous checked checkboxes are uncheched . Is there a way to save the state of the checkboxes and on form load to restore them ?
View 5 Replies
Mar 14, 2009
In Vb.net 2005 how can i trap the checked/unchecked state of a datetimepicker through an event. I'm trying to execute two different methods based on the checked/unchecked state of a datetimepicker when the user clicks the datetimepicker. When the user checks the dtPicker Method A is executed, when the user unchecks it Method B is executed. How can i trap it.
View 1 Replies
Jun 11, 2011
I'm trying to program a personal project, but I've hit a bit of a bump in the road.I've got a Button, a Textbox, and a CheckedListBox; when the button is pressed, whatever is in the TextBox is added to the CheckedListBox. However, when the form is closed and reopened, all of the CheckedListBox's items are no longer present. My CheckedListBox's name in the code is ZapList.
Can someone assist me in, not only saving all of the CheckedListBox's items, but retaining whether or not they were checked as well as the order they were in? I've run out of hair to pull (figuratively) and I really don't want to quit this project, too much effort has gone into it and I'd hate to see it go unfinished like my numerous other projects. :icon_cry:
View 3 Replies
Sep 16, 2009
I am trying to access the checked state of a CheckBox from a BackGroundWorker thread. I am utilizing properties and it seemed to work just fine. However, I'm using 10-15 CheckBoxes and I think using the InvokeRequired property would probably be best. I've looked over JMC's thread that talks about how to access controls from the worker thread a bunch of different times and I can't seem to grasp the concepts. When it comes to the InvokeRequired property, I suppose I understand why it is needed. But I'm not sure if I understand it completely.
From the example that JMC provides:
vb.net
Private Sub ResetTextBoxText()
If Me.TextBox1.InvokeRequired Then
Me.TextBox1.Invoke(New MethodInvoker(AddressOf ResetTextBoxText))
Else
Me.TextBox1.ResetText()
End If
End Sub
If I'm not mistaken, this tells us that if invocation is required to access the control, then we access via the MethodInvoker if not, then we just access to directly? So, if I need to check the checked state of a check box, I know I can just put a conditional statement after the Else line if I can access it directly. But, if I can't how would I use MethodInvoker to check the checked state? And then, when calling it from the worker thread, would I just call the sub?
View 9 Replies
Jun 3, 2011
I have a Main form, called Main.vb, that is a Parent Form. I have another form called Notes.vb. Inside Main.vb I have a toolstrip with a button on it called Notes. I'm wanting to change the checked status of the Button to either True when the Notes.vb window is open inside the parent or to false when it is close. Is this possible?
View 6 Replies
Mar 14, 2009
How can i trap the checked/unchecked state of a datetimepicker through an event. I'm trying to execute two different methods based on the checked/unchecked state of a datetimepicker when the user clicks the datetimepicker. When the user checks the dtPicker Method A is executed, when the user unchecks it Method B is executed. How can i trap it.
View 6 Replies
Apr 30, 2009
I have managed to get it to write a string to a textfile if the listviews checkbox is checked but i can not get it to write a particular string if it is unchecked.
'LOOP CHECKED ITEMS
For Each lstItem As ListViewItem In Me.ListView1.CheckedItems
Next
How do i Iterate an unchecked item as the library doesn't have .UnCheckItems?
If its checked i need to add "true" to the string and if its unchecked i need to add "false" to a string that gets written to a textfile.
View 4 Replies
Nov 19, 2010
I want to use property bindings under application settings to store settings for my program. However I have run into a problem. For some reason the checked property is not binding to drop down menu item's checked state. The binding works for text boxes and other controls. I have tried to bind both using the checked property, and checked state property. Auto check on click for the menu items are set to true.
Anyone have any recommendations in getting the app-settings property binding to work without the need to manually set that info and manually run My.Settings.Save?
View 2 Replies
May 26, 2009
i want to loop through toolstripmenuitem child of toolstripmenuitem but i dont fine yet :
For Each mnu As ToolStripMenuItem In Trangchu.MenuStrip1.Items
For Each mnu2 As ToolStripMenuItem In mnu ( red word is error ) Please show me)
MsgBox(mnu.Text)
Next
Next
View 15 Replies
Nov 11, 2009
I have a form that has to be on top for a period of time, and then can be set behind other windows normally. Is there anything in addition to setting Me.TopMost to True or False that needs to be done? I ask because it doesn't seem to be working.
View 1 Replies
Nov 9, 2009
I have a form with contextmenu where you can get the menu items on shockwave. I uses the menu items event to get the method of working when clicking them on shockwave by using right-mouse button. When I debug the project and when I clicked on testmenu item, nothing have happens.
Form Code:
Code:
Public Class Form1
[code].....
View 7 Replies
Nov 9, 2009
I have a form with contextmenu where you can get the menu items on shockwave. I uses the menu items event to get the method of working when clicking them on shockwave by using right-mouse button. When I debug the project and when I clicked on testmenu item, nothing have happens.[code]Please can you tell me why it doesn't do anything when I click on testmenu item?? And please can you help me to get this fix by when I click the point on shockwave to get the contextmenu items then click them to get the menuitems fully in working order??
View 2 Replies
Sep 18, 2009
I have a series of check boxes and text boxes that are paired up together. 3 check boxes and three text boxes. Right now I have code in each of the Check boxes changed event as follows:
If UseSuffix_CheckBox.Checked = True Then
SuffixValue_TextBox.Enabled = True
SuffixValue_Label.Enabled = True
[Code]....
What I would like is to have one public routine (Function or Sub) that gets handed in the the control name/ref that just got clicked and then perform the functions listed in the above statement. Basically I want to have one routine that all the check box changed event points and acts on that check box and its paired text boxes and labels. I know it can be done just not sure how to pass the control that was clicked by the user to the sub.
View 4 Replies
Aug 25, 2009
Is there a way set the spacing of menuitems in the drop-down menus of the MainMenu (MenuStrip)?
View 9 Replies
Jan 8, 2012
I have a form that has two views. These views are controlled by radio buttons on top of the form.
Here is the program:
Notice how the Radio button for Number Converter is selected.
Here is what it looks like when you select the Text Converter radio button:
That isn't right. I have it set to hide the panel containing the number converter and show the one containing the text converter when you click that one. It hides the number converter but doesn't show the text converter.
Here is a picture of the text converter panel:
Here is the relevant code:
Private Sub frmCalculator_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
rdoNumberConverter.Checked = True
End Sub
[Code]....
View 1 Replies
Oct 15, 2009
I'm trying to create a DLL injector (merely for 3rd party option-toggling), but for some reason this code doesn't work.It will always return "Failed to create thread!"Here are the contents of the (Form1.vb)
Public Class Form1
Private Declare Function GetProcAddress Lib "kernel32" (ByVal hModule As Long, ByVal lpProcName As String) As Long
Private Declare Function GetModuleHandle Lib "kernel32" Alias "GetModuleHandleA" (ByVal lpModuleName As String) As Long
Private Declare Function LoadLibrary Lib "kernel32" Alias "LoadLibraryA" (ByVal lpLibFileName As String) As Long
[code]....
View 6 Replies
Nov 9, 2010
Insert checkbox checked value when checked to textbox as comma seperated string in vb.net or javascript
suppose i have 3 checkboxes and and 1 textboxes in my webpage.aspx
when i checked checkbox1 and checkbox2 then in textbox it will appear as 1,2 only on checkboxes checked event ...
and i want its revert also :
if i set textbox de
View 1 Replies
Sep 22, 2011
my form contains a checked list box [data coming from the database] a combo box [bind to a database table product] and a listview [was previously a listbox]
[Code]...
View 5 Replies
Feb 20, 2010
project im working on for my course,the idea is a photo printing machine that loads up 4 images if usb stick is checked and a different 4 if memory card is checked. and then whatever image is selected appears in the big picturebox on the left [URL] i have 2 print size options set as radiobuttons, radiobutton 1 = 6x4, which costs 25cent per photo, radiobutton 2 = 8x10, and is 50cent per photo.i also have a textbox which will display the number of copies to be printed So here's my dilemma, when the print button is selected alongside one of the radiobuttons i want it to display a message saying something like this "you have selected (whatever the amount of copies)of this photo sized 6x4, or 8x10 depending on which radiobutton is selected, and i want it to display the total cost which is the number of copies multiplied by the rate for the print size selected, then an option saying "Do you wish to proceed" Yes or No.
I did something similar to this in class earlier in the year but cant remember it, it was an airline booking program with 3 types of payment cash, visa or mastercard,upon booking a message popped up saying there is a certain percentage discount for using visa or mastercard
View 5 Replies
May 15, 2010
im making dynamic sql statement rmode is a radio button and tmode is a combo box
[Code]...
View 2 Replies
Jun 6, 2012
I've got a checked listbox on my form which saves the checked items to a spot in my database on the .ItemCheck event.But there's a problem, when I begin checking items, I check the box and click off it, but it doesn't save. (This is if I've only chosen one item)
If I choose two or more items it will save, but unchecking them takes a lot of clicking around to figure it out.Is there a better event that I can use? I've tried the SelectedIndexChanged and that has the same result, there's a lot of clicking around in the checkboxes to end up with the desired selected items, and it does not allow a single item.
View 6 Replies
Apr 30, 2011
In a listview with check boxes, there are two fields being loaded, ID and Lastname. With this information I want to get the ID of the person whose box is checked with this sub:
[Code]....
View 3 Replies
Sep 22, 2009
I trying to get what I think should be a simple thing. I have a checked treeview. I need to get the text of each checked node into a string. For the life of me I can't get it. I am trying to loop thru all the nodes and see if they are checked but I keep getting a "object reference not set to an instance of an object" but I don't know why.
Dim value As String
Dim node As TreeNode
Dim i As Long
[Code]....
View 2 Replies
Mar 5, 2011
I want to know is parent of ToolStripMenuItem a MenuStrip or not?
View 8 Replies
Jan 30, 2011
I have mainform which has a menustrip and it contains many level of menuItems every thing works fine, but my question is when I display the form form any MenuItem by the click event and when I close or dispose the called form it dose not display where thelevel where it was called from, instead it come back to the top level menu and no one is selected.
View 5 Replies
Apr 2, 2010
I have a custom toolstrip renderer, which works perfect. But I want to change the forecolor of the toolstripmenuitems too. How can I achieve this?This code should be completed:
Public Class mymenu
Inherits Windows.Forms.MenuStrip
Public Sub New()[code]......
View 3 Replies