Tooltip Property For A Windows Form?
Aug 7, 2010I just started a Windows app using VisualStudio v10 VisualBasic and there is no Tooltip in a command button's properties.
View 5 RepliesI just started a Windows app using VisualStudio v10 VisualBasic and there is no Tooltip in a command button's properties.
View 5 RepliesI am currently programming within Visual Studio 2008 with VB.Net. I have been asked to add a tooltip to the upper closing button (the 'X' in the top right of the form next to the maximize and minimize buttons).
First I added a ToolTip from the toolbox to my form. I didn't have to disable the tooltips for the minimize, maximize and close and it usually doesn't appear. I then used @Saman function with one minor change:
Protected Overrides Sub WndProc(ByRef m As System.Windows.Forms.Message)
If m.Msg = 160 And m.WParam = 20 Then
ToolTip1.SetToolTip(Me, "Save and Close")
[Code]....
As you can see instead of using his ToolTip1.Show() I used ToolTip1.SetToolTip(). I found with the show it worked infrequently, yet with the setToolTip it set the tooltip of the ('X') close button to my new text ("Save and Close") and thus it shows up whenever my mouse goes over the close button.
where have all the ToolTip properties gone in this new edition of Visual Basic Express 2010 edition? I know this feature was available in the previous versions of Visual Basic, but in the 2010 Express release I don't see this feature listed any more, did Microsoft rename this, if so what would the new name be?
View 2 RepliesIs there a way to add a property to System.Windows.Form.Control base class without defining the new inherited class (in VB.NET) ?
I want to add a Tooltip property to all of System.Windows.Form.Control controls, which will be browsable in properties window of that control.
I want to use images as resources from another library.When I set it in the from.designer.vb-file and debug it, then it converts the value from:
ImgLib.Img1
Any hunk of code that loops trough the windows form controls array, and based on top/left to bottom/right, resets the TabIndex property? I've mashed a huge form together and expect my user community to want to move things around, and I don't want to have to fool around with this over and over again.
View 6 RepliesI am trying to change the backcolor of a tooltip using
tooltip.BackColor = Color
For some reason it stays white.
I have created a combo box in my project which takes a certain amount of numbers from a file. This Combo drops down the list of the numbers each of represents something. That something I want to be displayed in a tooltip when the mouse hovers on the combo box. Until now everything has gone fine. What I want now is to see the tooltip when the mouse rolls over the list of the dop down combo. How can I do that? Until now the internet didn't give me something to work on it. Is there some one to assist me on that?
View 2 Replieshow to hide bollon tooltip When user click on the ballon tooltip?
View 1 RepliesDoes anyone know if it's possible to skin the tooltip window so it looks like: Attachment 2448.Instead of the yellow box or the balloon like it does now?
View 1 RepliesI assigned a tooltip in my forms, I want it to show up everytime the form is minimized and hovered by a mouse pointer. These forms I am talking about are MDI Children.
View 3 RepliesI want to display a balloon tooltip in the system tray. Currently, my app has four forms. the main form host the notifyicon. In process of operation with other forms, i want the current form to be hidden , and display a balloon message using the notifyicon of the main form.
in the form about to close this is what i did
c# Code:
frmMain frm2 = new frmMain();
frm2.ShowBallon("Logged in","Check for new mail....");
this.Close();
[Code].....
The problem is that the procedure executes, but dosen't show any balloon .Another problem is that the notify icon does not disapper automatically when the app exits, except you hover the mopuse over it.
I have a small non mdi form with only 3 controls. The user can select a name of an animal on a listbox and a thumbnail picture of it is shown on the picturebox. There is also a tton.The tooltip on the thumbnail is quite important as left/right click do different actions but for some reason the tooltip will not display unless the user clicks the form.
View 2 RepliesI am trying to change the background color of a tooltip
I am using tooltip.backgroundcolor = color.colr
No errors but thecolor doesn't change
For a visualizer, I want to establish a control made of two controls. The visualizer is a HEX display of a buffer. Id like to chose the up to 16 byte hex field with a small numeric up-down counter. My problem is that I am writing the visualizer and the visualizer is not allowing me to assign a tooltip to me.form1 or aything nearly approximating that. I'd like the "form" to look like a tooltip. Currently it does allow me to use a messagebox. I have discoved that visuliizers can call classes:
Dim
visualizerHost As
New
VisualizerDevelopmentHost(objectToVisualize,
GetType(Hex1))
Where Hex1 is a class but the class will not allow me to define a tooltip.
For a visualizer, I want to establish a control made of two controls. The visualizer is a HEX display of a buffer. Id like to chose the up to 16 byte hex field with a small numeric up-down counter. My problem is that I am writing the visualizer and the visualizer is not allowing me to assign a tooltip to me.form1 or aything nearly approximating that.I'd like the "form" to look like a tooltip. Currently it does allow me to use a messagebox.I have discoved that visuliizers can call classes:
Dim
visualizerHost As
New
[code]......
I have a custom form that I use instead of msgbox for a number of reasons. The initial reason was to keep the message centered on it's parent rather than the screen. There are many articles about this but I still have not found an elegant way to get access to the Parent's properties from inside the Child without passing them in (by one way or another).
In the child form the me.parent, me.parentform are not instantiated and apparently can not be used.
The point is to have this form be totally encapsulated with the logic being self contained. This is not an MDI child, and I do not want it to be due to the limitations on MDI children.
My current workaround looks like this I use a ShowMsg Function in my MyMsgBox form which looks like this:
[Code]....
I have got a surprise when my app did not work as I expected when I started it from the Windows Start Menu. I explain: When starting the program from the application directory, it works fine, because the "Application Path" property gives the right path to find the access database located in the same directory, BUT, the problems comes when I start the program from the Windows Start Menu. What can I do to solve this?
View 7 RepliesI had created a windows forms application in vb.net. It contained several windows. Now the users of that application are telling me to display all in one main form. They want to see all the details in one form. I had implemented MDI but they want something like tabs. On different tabs different forms should be displayed. How shall I implement this.
View 4 RepliesIn the Windows control panel you can adjust the Display properties for which text size to use between the default value which is the smallest size text and 2 larger sizes. How can you get which text size the Display properties are set to for one's computer through Visual Basic code?
View 3 Repliesi have a form and i want to design it according to how it was generated for example if it was opened by button 1 then set xx =xx etc
how can i determine how the form was called?
i've been stuck on this for a while and searched many forums first with no solution so i'm posting myself. In VB for excel i've used Screenupdating= false to disable the screen updating however now i'm creating a visual studio 2010 windows forms application and its not showing up as a property. [code] And i get the error 'screenupdating is not a member of 'system.windows.forms.application'.
View 2 RepliesI am using a masked edit text box in my windows application that was developed by using vb.net. In normal text boxes (CTRL+Z- to revert back to original value) is working fine. But In case of Masked Edit Textboxes its not working fine. This ctrl+Z should provide the functionality as same as normal textbox.
View 1 RepliesI am working on windows application form I am having one text box and Listbox. I want if user type on textbox, then List box item is going to be selected, that is working fine. List Box has more than 10,000 records. It takes time to select item from ListBox, while write data in textbox.
[Code]...
How can I change the background of my form to look like that of Windows Mobility Center in Windows Vista?
View 2 RepliesIt is possible to create windows service using windows form control in vb.net. give me the url or links. The windows forms control such as, Timer control, list-box, notify-icon control etc.
View 1 RepliesI have seen this happen before but am not sure how I resolved it in the past. On runtime the controls of my form change from the windows 7/vista format to an older version format as shown in the attached image.
How to display the controls in the format on the left (new windows format)
i am doing project of Order Accepting system for five star hotels.Scenario is Waiter will accept order using Window Mobile which is Connected to WiFi present in hotel.I want to communicate to database(Sql Server) present on My Machine (Computer present in kitchen) through WiFi and Add order into table present inside database. This should notify my application present on Compter and should print order. After completion of Order Application from kitchen will notify to waiter about completion. My problem is How to Communicate with database present on Remote computer using WiFi from windows Mobile.
View 2 RepliesIt is possible to create windows service using windows form control in vb.net.If yes then please give me the url or links.
View 1 RepliesI'm having some very weird issues with interfaces right now.
I have a very simple setup. In one of my class, I have a Property implementing a Property from an Interface.
In my class it's like:
Private _oForm As IForm
Public Property Form As IForm Implements IContainer.Form
Set(value As IForm)
[Code]...
I have like dozens of interfaces like this working throughout my project and I can't believe this simple one can't work!