I have a small non mdi form with only 3 controls. The user can select a name of an animal on a listbox and a thumbnail picture of it is shown on the picturebox. There is also a tton.The tooltip on the thumbnail is quite important as left/right click do different actions but for some reason the tooltip will not display unless the user clicks the form.
View 2 Replieshow to hide bollon tooltip When user click on the ballon tooltip?
View 1 RepliesI have a ToolTip on a TextBox control. When I hover the cursor over the TextBox the ToolTip appears as expected. But if the ToolTip disappears after it's AutoPopDelay time has expired or if I click on the TextBox while the ToolTip is still showing, then the ToolTip will not appear again when I hover the cursor over the TextBox. Is there any way to cause the ToolTip to reset so it shows up again?
View 1 RepliesI have created tooltips on a form from the toolbox and defined them as owner draw. I tied them to either a panel or a grid and they show up as black boxes the size that would contain the text that is assigned. If I had two areas next to each other, the text shows up. Neither the background or the forground color is black, so the black of the box is not from a color assignment. This has worked at one time and I do not know what changed.
View 2 RepliesI am using Nplot at the moment, all is fine and well but I am trying to capture the co ordinates of where the user clicks on the graph.I can see the co ordinates when i float over the graph, but i cant seem to find the class which shows the co ordinate in a little tooltip by the mouse cursor.
View 2 RepliesI am having trouble with a separate program that keeps saying Adobe flash is not installed. And I have tried everything but it still wont go away (that was off topic a bit). I want to create a program that will auto click the words "Click Here" if the error message shows. Because if I click there then it will work normally until it pops up again.
View 3 RepliesI have to create a program where the user enters 2 numbers and the program outputs all the even and odd numbers between those 2 numbers.I have that part of the code complete. But now I have to enter code where if the user enters a letter instead a number in either input box, that a message pops up and tells them to enter a number, instead of a letter... I keep going round and round on this and can't seem to get it quiet right.Here's my
'Author: Ambre A. Coleman
'Purpose: To show all odd and even numbers betweeen two entered numbers
'Date: 09/14/2011[code].....
I'm trying work a little bit more with msgboxes and I'm sorta confused with them right now. This is waht I have:
[Code]...
What its doing right now is opening my first msgbox with y/n style. If I click no then it shows my second msgbox. Heres the problem When I click yes on my msgbox it shows the ofd2. But if I click yes on my first msgbox it still shows my second msgbox but if I click no on that it shows my ofd1. I know the difference between the 2 openfiledialogs because I have the filters are different. My question is how do I get the second msgbox to not show if I click yes on my first msgbox?
How to fix the error in code..this code will always display msg box if user select ot nt slect the checkbox .. but i want if user doesn't select any of the checkbox or forgot to select checkbox then msg box will ppear other wise redirect to other page ..
[Code]....
is there anyway i can randomly call up even numbers like i have a label (label1) and button (button1) i want to click on the button and it shows EVEN NUMBERS on the label at random?
View 6 RepliesIn windows explorer on Windows 7 (and Vista I believe), when you click on a file the bottom pane shows the files metadata. What I am particularly interested is the files Tag. If you click into the tag field, Windows will give you a list of tags. The list appears to be random and incomplete. So I have two questions. Is there a way to retrieve a list of a file tags on the system and is there a way to add to the list of tags in the Windows file pane?
View 1 Repliesim creating an array that contains something like this [code]Then i need to make it so when i click on a listview item it searches for the same "Application" name and shows the path.I have everything planned out, but im not sure what i should use to do this.Should i use list(Of string), arraylist or just string(,)?I have no idea of the amount of elements it will contain. I was thinking of using a list so i can use .find without having to make a search function.Anyways, what would be the best/fastest way to do this? Its possible i might have up to 1000 rows in this array, so i want something fastish.
View 13 RepliesI don't know why it is not saved to the table. Here is my code.
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As _
System.EventArgs) Handles btnSave.Click
Try
[Code]....
I need to create a program that when I click a button it shows a sentence (took it from a list) random. But after it have to delete the sentence from the list 'cause we dont want to read it again I don't know so much about VB so I'd like some help!
View 25 RepliesDoes anyone know if it's possible to skin the tooltip window so it looks like: Attachment 2448.Instead of the yellow box or the balloon like it does now?
View 1 RepliesI assigned a tooltip in my forms, I want it to show up everytime the form is minimized and hovered by a mouse pointer. These forms I am talking about are MDI Children.
View 3 RepliesI am currently programming within Visual Studio 2008 with VB.Net. I have been asked to add a tooltip to the upper closing button (the 'X' in the top right of the form next to the maximize and minimize buttons).
First I added a ToolTip from the toolbox to my form. I didn't have to disable the tooltips for the minimize, maximize and close and it usually doesn't appear. I then used @Saman function with one minor change:
Protected Overrides Sub WndProc(ByRef m As System.Windows.Forms.Message)
If m.Msg = 160 And m.WParam = 20 Then
ToolTip1.SetToolTip(Me, "Save and Close")
[Code]....
As you can see instead of using his ToolTip1.Show() I used ToolTip1.SetToolTip(). I found with the show it worked infrequently, yet with the setToolTip it set the tooltip of the ('X') close button to my new text ("Save and Close") and thus it shows up whenever my mouse goes over the close button.
I want to display a balloon tooltip in the system tray. Currently, my app has four forms. the main form host the notifyicon. In process of operation with other forms, i want the current form to be hidden , and display a balloon message using the notifyicon of the main form.
in the form about to close this is what i did
c# Code:
frmMain frm2 = new frmMain();
frm2.ShowBallon("Logged in","Check for new mail....");
this.Close();
[Code].....
The problem is that the procedure executes, but dosen't show any balloon .Another problem is that the notify icon does not disapper automatically when the app exits, except you hover the mopuse over it.
I just started a Windows app using VisualStudio v10 VisualBasic and there is no Tooltip in a command button's properties.
View 5 RepliesI have a button on my form where I'm showing a ContextMenu when the user left clicks on it, I'm actually using MouseUp right now to show it.What I would like to have happen is the user click on the button, the button stays pressed while the ContextMenu shows, it returns to normal when the ContextMenu closes (Either a menu item was selected, the user hits the escape key or they click/tab to somewhere else). Also I'd like to position the ContextMenu in the lower left corner if the menu opens down or the top left corner if it opens up. So the left edge of the ContextMenu is flush with the left edge of the button.Moreso the button staying pressed until the ContextMenu is closed.
Edit: I'm also ok with this being it's own control inheriting the FW's Button that used the assigned ContextMenu as well.
How can you add a image where when you double click on the icon and the program starts it shows a picture before the program loads. Like Photoshop startup or the new 2010 visual Basic express start up
[Code]...
I am really confused! My program doesn't work if I don't have Visual Studio here in my PC. To test it I have uninstalled Visual Studio. But my program doesn't work though Flash Player is present there (I have used Flash animation in the first form).
To be more sure about it I have installed Flash. But it's not working! That means the Flash animation file (.swf) is not making a problem! It needs support from Visual Studio to start. Doesn't it mean that some files are not attached with a setup file as a result it needs Visual Studio to run? Let me tell you how I create a setup file of my program.
CODE:
When I click on the icon of my program it shows the error message
CODE:
Reporting details: This error report includes information regarding the condition of WindowsApplication1. When the problem occurred the operating system version and computer hardware is use; your Digital Product ID, which could be used to identify your license; and the Internet Protocol(IP) anddress of your computer.
I'm printing a VB.NET form using BitBlt API my code as follows[code]...
View 7 RepliesI have a splash form that opens in the following Sub of the main form of the app[code]...
The Splash Form opens and closes fine, but no controls (a text box and a graphic, on a panel) appear on the form. I knew I was probably missing something (this was far easier than anything I found searching), but at least the form opens and closes. The app actually starts with a SubMain, which is only used to control how it opens with it's registered file type.
I am making an app (sorta like a computer lock) that won't let you do anything on your computer until you type in the password. I am using
Public Sub w_setfocus()
Dim f As Boolean
While (1)
f = Me.ContainsFocus()
If f = True Then
Me.Focus()
f = Me.ContainsFocus()
End If
End While
End Sub
End Class
And w_setfocus is run on form1_load. The problem is, the form then never shows up.
I have a treeview which have a listimage. And it has imageselectindex property (image is yellow ball)My problem is : When i click any node, the image of that node shows imageselectindex . I only want thirth child node will show it. I dont want when i click at first node (rootnode) or child of roodnode , the yellow ballon shows.
View 9 RepliesI was working on a project in vs 2005 and decided to see my project's form in microsoft blend, the form did not show and i closed blend and saved no changes. The next time i open my project in visual studio, my form1 design mode shows me some code for the windows form designer. How can i get my form back as i need to add more controls and change the orientation of some others?
View 10 RepliesWhen I try to open up a form designer, all I see is code and no form! How can I open up the designer, since the code says to modify using the designer and not the code editor?[code]....
View 4 RepliesI've written a small program that monitors the customer field in Quickbooks and query's a database to determine if there are any important notes for the selected customer. This works fine however, I either need the messagebox or a form to come to the front of all open windows on the system to inform the user that the selected customer needs to be reviewed.
How can I ensure that a form (or messages box) that opens in my program comes to the front of any and all application windows that are open?
Something happened to my project and it got all messed up. I am not sure what happened, but the form I was working on only shows the code and not the project itself(where you design it). I am working in VB2008 Express Edition and do not wish to start over. What happened to my form?
View 6 Replies